subcategories
(3rd category level)
Manufacturer:
(Category: 107)
A Lissmac steel brushing and deburring machine is available. Passage width: 1500mm, max. sheet thickness: 20mm, medium: brushing block, machine dimensions X/Y/Z: approx. 3100mm/1400mm/1800mm, weight: approx. 2300kg. Documentation available. On-site inspection is possible.
sheet width: 170 mmplate thickness: 0 mmnumber of rolls: 0 weight of the machine ca.: 0,1 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. coil weight: 3t, max. strip width: 500mm, strip thickness: 0.4-5mm, connected load: 0.55kW. With control, straightener and hydraulic unit Rexroth, without documentation. On-site inspection is possible.
sheet width: 2000 mmsheet thickness - max.: 6 mmconnected load: 7,5 kW: . with crowbar: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
material width: 300 mmmaterial thickness: 3 mmcross cut: weight of the machine ca.: 0,12 tdimensions of the machine ca.: 0,5, 1, 1 mCoil ShredderThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure / power: 50 kN control: Siemens Simatic OP 7 serial number: 2263 weight of the machine ca.: 2 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 12-54 mm (Kupfer / Edels. mmserial number: EBD 022 99 002 mode of operation: Schneiden/ Entgraden / Re speed: Rollen 450 U/min m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 10 tworkpiece diameter: 320 - 3200 mmdrum diameter: 300 x 120 mmfeed: 100 - 1000 mm/mintotal power requirement: 1,1 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control panel: Boschert Stanze Year: 1990 Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 75 (800) mm: 60 (750) mmL-beam: 80 x 80 x 8 (800) mmT - beam - web outwards: 100 x 11 (1000) mmAxis diameter: 80 mmwork speed: 6,0 m/minTool diameter: 242 mmtotal power requirement: 4 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 1,5 x 1,05 x 1,4 mProfile bending machine with:- Foot pedal right / left- Recording: wave 50mm- with digital display- hardened special steel shafts- 1 set of standard rollers- Lower rollers are driven- Upper roll up and down hydraulically deliverable- Horizontal and vertical operation- Engine with braking deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1020 mmplate thickness: 2,5 mmdistance between columns: 1050 mmdaylight opening: mm: 135 °total power requirement: Handbetrieben kWweight of the machine ca.: 0,32 tdimensions of the machine ca.: 1,4 x 0,6 x 1,3 mSegment-bending machineSegment widths:25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 260mm.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: bis 60 mmweight of the machine ca.: 1,8 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 30 mm: 30 mmL-beam: 20 x 20 x 4 mmflat steel: 25 x 6 mmAxis diameter: 20 mmwork speed: 11 U/mintotal power requirement: 0,2 kWweight of the machine ca.: 80 Kgdimensions of the machine ca.: 0,6 x 0,6 x 1,5 mProfile bending machine with:- Foot pedal for right/left rotation- Digital display- 1 set of standard rollers- 3 rollers are driven- Horizontal or vertical operationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2050 mmplate thickness: 8 mmdistance between columns: mmelectrical: . weight of the machine ca.: 6,3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 610 mmplate thickness: 1,0 mmdistance between columns: 620 mmdiameter of upper rolls: 38 mmtotal power requirement: Handbetrieben weight of the machine ca.: 40 Kgdimensions of the machine ca.: 950 x 270 x 360 mmSheet bending machine with:- Capacity 1050 x 2 mm- High strength wrought iron rollers with SAE 1050 certificate.- Footswitch- conical bending- Swiveling top roller- Safety device emergency leash- Documentation- 400 volts- CE certificateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1550 mmplate thickness: 3 mmdistance between columns: 1600 mmback stop - adjustable: 600 mmconnected load: 3 kWweight of the machine ca.: 1,1 tdimensions: 2,06 x 2,14 x 1,21 mDemonstration machine with small paint damage.The machine works quietly and is powered by its geared motorBraking system energy-saving.Our machine is welded as a monobloc body from ST42 quality material.The knives of the machine are of 2379 quality and the brand name is BOHLER.These high-quality knives guarantee precise cutting.Emergency stop button, foot switch and finger guard are includedstandard equipment.(Documentation in English only)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
serial number: 28043 weight: 3 tpressure: 30 tvolt: 380 Vfrequency: 50 HzThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 915 mmplate thickness: 1,0 mmdistance between columns: 920 mmdaylight opening: mm: 135 °total power requirement: Handbetrieben weight of the machine ca.: 96 Kgdimensions of the machine ca.: 1170 x 400 x 480 mSegment-bending machineSegment widths:25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 260mm.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: max. 16 mmsquare edge steel: 16 mmround bar steel: 16 mmweight: 45 Kg: 180 °dimensions: 0,4 x 0,4 x 1,1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Double mandrela coil weight each side: 1 ton Material width: 200 mm Coil exterior diameter: 2.050 mm Expansion range: 350 - 640 mm Speed: 40 s.p.m. Required power: 5,2 kW Weight of machine approx.: 2,2 ton
Decoiler Coil weight: 2,5 ton Material width: 50 - 500 mm Coil exterior diameter: 1400 mm Expansion range: 420 - 520 mm Leveller / Straightener Material width : 500 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 50 mm Number of pinch rolls: 2 pcs. Material thickness: 6 mm Cross section: 3000 sq mm Feeding speed: 6 - 24 m / min
plate thickness: max. 1,5 mmfeed: des Bleches 12 m/mintotal power requirement: 1,5 kWweight of the machine ca.: 400 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 100 tworkpiece diameter: 1000 - 6300 mmdrum diameter: 500 x 240 mmfeed: 100 - 1000 mm/mintotal power requirement: 7,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 80 tworkpiece diameter: 850 - 5500 mmdrum diameter: 450 x 240 mmfeed: 100 - 1000 mm/mintotal power requirement: 7,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 60 tworkpiece diameter: 750 - 5000 mmdrum diameter: 450 x 180 mmfeed: 100 - 1000 mm/mintotal power requirement: 5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight max.: 40 tworkpiece diameter: 600 - 4500 mmdrum diameter: 400 x 160 mmfeed: 100 - 1000 mm/mintotal power requirement: 3 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A CNC turret punching machine Amada and an automatic loading and unloading unit LKI Käldman (Amada) are available. 1) CNC turret punching machine Amada EMZ3610, year of manufacture: 2010, pressing force: 300kN, travel X/Y: 2500mm/1525mm, travel X/Y with repositioning: 5000mm/1525mm, max. material thickness: 4.5mm, max. table load: 160kg. Traversing speed X/Y: 100m/80m/min, axis speed: 128m/min, positioning accuracy: +/-0.1mm. Turret stations 45, auto-index stations: 2xB/2xC, turret speed: 30rpm, stroke rate: 1000 strokes/min, machine weight: approx. 21000kg. 2) Loading and unloading system LKI Käldman (Amada) MP Sheetcat 3015, year of manufacture: 2017, min. sheet dimensions X/Y: 1000mm/300mm, max. sheet dimensions X/Y: 3050mm/1525mm, sheet thickness: 0.8mm-6mm, max. sheet weight per pallet: 3000kg, suction cups: 34, machine dimensions X/Y/Z: approx. 8400mm/3600mm/3100mm. Documentation ...
Working width: 3050mm, material thickness: 6mm, throat depth: 200mm, back gauge adjustment: 1000mm, drive power: 15kW, cutting angle range: 1°-2°, table height: 900mm. Machine dimensions X/Y/Z: approx. 4100mm/2300mm/2100mm, weight: approx. 8500kg. On-site inspection is possible.
A Finn-Power CNC punching press is available. Press force: 300kN, max. workpiece width: 4061mm, max. workpiece length: 1528mm, max. workpiece thickness: 8mm, max. workpiece weight: 200kg, quick chuck X/Y: 80m/min/60m/min. Turret head positions: 20, turret head speed: 30rpm, tool type: thick turret, max. tool diameter: 89mm. Travel speed: 100m/min, drilling accuracy: 0.1mm, positioning accuracy: 0.08mm, oil tank capacity: 330l, max. operating pressure: 300bar. Machine dimensions X/Y/Z: approx. 5900mm/6300mm/2500mm, weight: approx. 13500kg, control: Siemens Sinumerik 840D. The table of the machine has been extended. Without machine housing. Documentation available. On-site inspection is possible.
A Drinns flywheel eccentric punching machine is available. Pressing force: 250kN, ram table distance: 230mm, stroke adjustment: 10mm-65mm, number of strokes: 145 strokes/min, flywheel speed: 145rpm, max. tool weight: 190kg, machine weight: approx. 2250kg. Documentation available. On-site inspection is possible.
