subcategories
(3rd category level)
Manufacturer:
(Category: 107)
sheet width: 3100 mmplate thickness: 6.0 mmthickness at Niro-steel: 4.0 mmdistance between columns: 3120 mmdown holder: 14 Stückcutting angle: 1°5 no. of strokes: 14 Hub/mincontrol: ENC 100 table width: 500 mmwork height max.: 880 mmoil volume: 170 ltr.total power requirement: 11.0 KWweight: 5550 kgrange L-W-H: 3750 x 1950 x 1650 mm Machine was used for ALU processing no heavy sheet metal processing good condition (!) new price ~ 32.000 Euro----------------------------------------------------Swing cut guillotine shear with fixed cutting angle with DURMA ENC 100 NC control unit manual cutting gap adjustment from the front----------------------------------------------------Equipment:- electro-hydraulic guillotine shears swing cut- with DURMA ENC 100 NC control unit Backgauge preselection - X axis Number of pieces (in automatic mode) Control panel, front left Retraction from backgauge on/ ...
: neu : ca. 8 Wochen ab Auftragse : Spanien : 19600 €: 376.32 €: 55 to: 500 mm: 5 : 40/10 bzw. 20/20 mm: 20 mm: 37 1/min: 300x15 / 200x20 mm: 10x42x90 mm: 5 kW: 2100 mm: 1160 mm: 2090 mm: 1750 kg2 foot pedals for independent work at 2 stationshydr. driveflat bar shearangle bar shear with minimum deformationby diagonal moving of the bladeround and square bar shearrectangular notching unitpunching unit up to diam. 40 mmfast hydraulic, Ankörnvorrichtungoilfillingtable at the punching station with gaugetable at the notching unit with gaugetable at the flat bar shearuser manual in GERMAN and ENGLISHOPTION:Kit € 970,00length stop 1000 mm with contact switch, for angle, flat or bar stationmagnetic machine lamp10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6 Monate ab Auftragse : Taiwan : 51300 €: 969.57 €: 2540 mm: 3.5 mm: Hydraulisch : 135 °: 3 kW: 3850 mm: 1700 mm: 1860 mm: 3700 kgNC control for bending anglemanual back gauge 600 mmhydraulic drivenvertical movement of upper beamsegmented bladesegmented goose neck rail 30°, 110 mm with quick tool change systemone piece flat bottom bar 30 mmaccording to CE rules(sample photo showing model V-AMH 2535 2 axes NC control)OPTION:2 axes NC control with touchscreen incl. motorized back gauge 800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2024 : 8310 : prompt, Zwischenverkauf v : Taiwan : 46500 €: 888.15 €: 1 : 2035 mm: 3.5 mm: Hydraulisch : 135 °: 3000 mm: 1100 mm: 1750 mm: 2200 kgNC control for bending anglemanual back gauge 600 mmhydraulic drivenvertical movement of upper beamsegmented bladesegmented goose neck rail 30°, 110 mm with quick tool change systemone piece flat bottom bar 30 mmaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6 Monate ab Auftragse : Taiwan : 38700 €: 739.17 €: 2035 mm: 3.5 mm: Hydraulisch : 135 °: 3000 mm: 1100 mm: 1750 mm: 2450 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rules(sample photo)ALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A hydraulic 3-roll plate rolling machine Omcca is available. Working length: 2050mm, max. plate thickness rolling/pre-bending: 8mm/6mm, roll diameter: 200mm. Machine dimensions X/Y/Z: approx. 3200mm/900mm/1500mm, weight: approx. 3300kg. On-site inspection is possible.
: neu : ca. 8 Wochen ab Auftragse : Spanien : 9000 €: 173.7 €: 36 to: 170 mm: 3 : 27x10 mm: 15 mm: 24 1/min: 350x6 mm: 80x8 mm: 2.2 kW: 1100 mm: 800 mm: 1400 mm: 485 kg3 working stationsfoot pedalhydraulically drivenoil filledtable at punching stationwith gaugeuser manual in GERMAN and ENGLISH FLAT STEEL SHEAR flat steel mm 200 x 13 with small deform. mm 350 x 6 blade lenght mm 356 round bars mm 30 square bars mm 25 working hight mm 980&,nbs ANGLE IRON SHEAR L profiles 90° mm 80 x 80 x 8 L profiles 45° mm 50 x 50 x 6 round bars (optional) mm 35 square bars (optional) mm 30&,nbs NOTCHING STATION (optional) sheet mm 8 L profiles mm 60 notching depths mm 53 PUNCHING STATION max. punching cap. to 36 max. sheet diam. mm 27 x 10 gap mm 170 stroke mm 28 working height mm 980The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8905 Type: LF 3015 E Producer: G-WEIKE Created: 2022 Parameters: Operating hours: 900 h Laser power: 1.5 kW Work table length: 3000 mm Work table width: 1500 mm Maximum sheet metal cutting thickness (steel): 10 mm Source: CWFL-1500 Equipment: Cover (including glass)
x-travel: 4216,0 mmy-travel: 2007,0 mmz-travel: 305,0 mmcontrol: CNC table-size: 4902,0 x 2134,0 mmmax. workpiece weight: 1465 kg / m²machine weight ab.: 2500 kgtotal power requirement: 30 kWdimensions of the machine ca.: 5486,0 x 3708,0 mmThe compact waterjet cutting system in bridge design consists of a torsion-resistanttorsion-resistant steel construction, which is coated with a special durable anti-corrosion coating.coating. Both the two X-axes and the particularly high Y-axis are based on theY-axis are based on the maintenance-free design specially developed by OMAX for the special requirements of a waterjet cutting system.specially developed by OMAX for the special requirements of a waterjet cutting system.Equipment: - Motorized Z-axis - Water level control - Abrasive system with AFS 1000 abrasive conveyor system - High-pressure system with special stainless steel high-pressure pi ...
: neu : ca. 8 Wochen ab Auftragse : Türkei : 8700 €: 167.91 €: 250 mm: 6 mm: 3 mm: 25 1/min: 90 °: 4 kW: 950 mm: 780 mm: 1115 mm: 585 kgHydraulic driveAutomatic adjustment of the blade gap2 downholder2 gauges angle adjustableProtection cover, acrylic glassFoot pedalWaste boxAccording to ",CE", regulations User manual in English or GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Punching force: 560 kN For example, punches a 30 mm hole in 15 mm steel Stroke release via foot switch Range of tools is included in the price
Key data: 3000 mm, 8 mm
3-roll bending machine / round roller Schäfer SRMVHY – fully functional For sale is a used 3-roll bending machine (round roller / sheet metal bending machine) from the manufacturer Schäfer, model SRMVHY, built in 1992. The machine is in fully functional condition and is ready for immediate use. The rollers are hydraulically adjustable, which allows for precise and comfortable adjustment. The round bending machine is ideal for bending sheet metal in workshops and production plants. Technical data: Manufacturer: Schäfer Model No.: SRMVHY Year of Make: 1992 Max. sheet width: 3,000 mm Max. sheet thickness (mild steel): 8 mm Roller diameter: approx. 200 mm Voltage: 380 V Dimensions (L x W x H): approx. 5,300 x 1,800 x 1,300 mm Condition: used, fully functional Equipment: hydraulically adjustable rollers Changes and errors in the technical data, ...
sheet width: 3040 mmplate thickness: 4 mmdistance between columns: 3040 mmstroke of upper beam: 200 mmadjustment of lower and bend clamping: 100 mmtotal power requirement: 6,4/3 kWweight of the machine ca.: 6,3 tdimensions of the machine ca.: 4,3 x 1,2 x 1,8 mCondition: ready for operation: Electric 380 Volt: Control panel: Winkelvorwahl Holder for divided upper tools: Upper tool divided: 3040 x 120 mmHnad control: Sheet metal shelf behind: Folding blade: Flat rail for folding beam: Motorized folding machine with double-sided bending beam drive, lower, upper and bending beam adjustable, drive motors as brake motors - slip clutches as overload protection, bending angle adjustment via potentiometer, individual switching for each work step by hand switch, SEGMENTED TOPRAIL 120 mm height (Photo 7).Please notice that such a machine now costs about €70.000,--.As usual, the sheet thick ...
Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1140 kg
Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1200 kg
Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1200 kg
: 2100 mm: 7 mm: 6 mmroll diameter: 190 mmmin. dia.: 285 mm: 4 kW: 3200 kg: 4000x1350x1500 mmEquipment:- motorized rear roller adjustment- Digital display- Automatic conical bending. - Foot switch- Safety devicesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 4010 mm: 1.5 mm: 2 mm: 4 ELECTROCINEMATIC DRIVE OF THE BENDING JOINTSmillmeter precise adjustment of the clamping beamBMS MULTI-Touchcontrolelectric powered rotary shearelectronic depth stopflexible material supportsinclined bending beamoptimized geometry of the clamping beamsafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Extended depth 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request clamping beam made out of hardox price on requestPrices ex works Germany.Transport and commissioningat customers place on request.The data for this ad was created with ModulMWS - the software solu ...
Material width 150 mm, material thickness 0.5 -3.0 mm Colour: green Total power requirement: 380 V Weight: 350 kg Dimensions: 800 x 1200 x 1350 mm Roller diameter: 24 mm Machine number 700257
Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, 2-piece -Dimensions: see drawing in the photos -Total length: 1500 mm / 1x 1000/500 mm each -Transport dimensions: 1000/143/H62 mm -Total weight: 31.5 kg
Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, 2-piece -Dimensions: see drawing in the photos -Total length: 1500 mm / 1x 1000/500 mm each -Transport dimensions: 1000/143/H60 mm -Total weight: 30.8 kg
Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, 3-piece -Type: PBS-H-SM-09 R=1 88° -Dimensions: see drawing in the photos -Total length: 2505 mm / 835/27/H170 mm each -Transport dimensions: 835/170/H81 mm -Total weight: 48.4 kg
Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Dimensions: see drawing in the photos -Length: 490 mm -Dimensions: 490/144/H30 mm -Weight: 10.8 kg
Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, 2-piece -Dimensions: see drawing in the photos -Total length: 682 mm / 1x 505/177 mm each -Transport dimensions: 682/143/H28 mm -Total weight: 13 kg
Reinforcing steel shear, reinforcing steel cutting machine, construction steel shear, profile shear, punch, punching machine -Manufacturer: L & L, steel shear with chassis -Type: FM1001 -Drive: 1.5 kW motor -Cutting width: 20 mm -Cutting height: 100 mm -Dimensions: 1160/500/H765 mm -Weight: 334 kg
PRODUCT (PROFILE, TUBE) external diameter min.: 25 mm external diameter max.: 76 mm wall thickness min.: 0.7 mm wall thickness max.: 3.25 mmLINE CHARACTERISTICS welding process: HF inductive sawing process: travelling speed max.: 100 m/minELECTRICAL SPECIFICATIONS mains power supply: 680 kVATechnical data & highlights:System length: approx. 130 mStaff requirements: 6 employees for operationWelding process: High-frequency welding up to 400 kHzInduction welding process: Power up to 250 kWAdvantages:Robust and reliable design – suitable for continuous industrial operationPrecise welding quality thanks to state-of-the-art high-frequency technologyIdeal for manufacturing pipes in various dimensions-Pipe welding machine: Abbey Etna-Strip processing + saw VAi Seuthe-Rolling mill Carl Wetzel-Induc ...
PRODUCT (PROFILE, TUBE) external diameter min.: 11 mm external diameter max.: 38 mm wall thickness min.: 0.8 mm wall thickness max.: 2 mmLINE CHARACTERISTICS welding process: HF inductive sawing process: travelling speed max.: 120 m/minELECTRICAL SPECIFICATIONS mains power supply: 440 kVAFor sale: well-maintained pipe welding system as a complete package.A well-maintained pipe welding system is available for sale.This system has previously been used to manufacture pipes for USM furniture, but is designed for a wide range of pipe diameters and can therefore be used flexibly for different production requirements.Welding is carried out using an EFD Induction high-frequency induction welding system, built in 2018, which ensures a modern and efficient welding process.Total length of the system: approx. 1 ...
A hydraulic CNC plate shear Baykal is available. Cutting length: 3060mm, max. sheet thickness (St42): 10mm, operating pressure: 260bar, stroke rate: 12/min. Machine dimensions X/Y/Z: approx. 4000mm/2600mm/2000mm, weight: approx. 9600kg, control system: Delem DAC 310. Documentation available. On-site inspection is possible.
Beyeler, CP 4100x10, Cutting length : 4100mm, Max. sheet thickness 10mm,
Sheet metal shears, tin scissors, sheet metal scissors, hydraulic shears -Manufacturer: Rudolf Bock, hydraulic guillotine shear, reinforcing steel mesh shear type 2550 -Cutting width: 2500 mm -Max. cutting capacity: Ø 12 mm double at 100 mm pitch -Motor: Dietz 7.5 kW -Space requirement: 3020/2000/H1320 mm -Transport dimensions: 3130/1080/1465 mm -Weight: 2000 kg
Heinz Sanders GmbH
