Other Milling Machines used for sale (18)

We are pleased to offer for sale a complete high-precision manufacturing cell designed for the production of long, helical and screw-profile components, including PCP and mud motor rotors, extruder and injection molding screws, compressor and pump spindles. The equipment includes: 1. 2008 LEISTRITZ PW190.8000.HP Peeling / Whirling — Fully Operational Capacity: 120 mm (4.72”) diameter × 8,000 mm (315”) length Machine weight: 92,594 lbs (42,000 kg) 2. 2011 LEISTRITZ LWN300 Milling / Hobbing — Fully Operational 3. 2009 LEISTRITZ PW300PM Milling / Hobbing — Not in Service 4. 2014 WEINGÄRTNER FINISH 450 Finishing / Polishing — Fully Operational This equipment forms a comprehensive production route covering roughing, profile machining, semi-finishing and final surface finishing of long, high-precision helical and screw-profile components. Typical applic ...

Steel Storage Structure for Plates and Materials Type: Structure for storing plates and materials Material: High-strength structural steel Profiles: Welded rolled or tubular steel sections Construction: Reinforced structure with horizontal and vertical bracing Finish: Anti-corrosion paint or epoxy coating Height: 2,000 mm – 4,000 mm Width: According to number of storage bays Depth: Adapted to sheet dimensions Capacity per level: Variable (e.g., 1,000 kg – 5,000 kg per compartment) Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51153-87

2x double spindle milling machine Walther Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

2-spindle copy milling machineconnection voltage 400Voltmotors 2 x 0.75KWspeed 12000rpmSee picturesCondition: untested Auction-ID: A7-51438-638

Milling machine TOS KURIM FRO 6, FRO8

Auction-ID: A1-41281-46

Small Drilling/Milling Machine ISERT ELECTRONIC Travel X: 350 mm Travel Y: 300 mm Travel Z: 70 mm Rotation: 8000 / 9500 / 13500 / 20500 / 24000 RPM The machine could be used for drilling printed circuit boards or other use. The machine was controlled through a PC that is no longer present. Possibility to use it in manual Equipped with: 1 Milling Machine KRESS Voltage: 220 V mono Dimensions (L x W x H): 950 x 700 x 700 mm Weight: approx 60 KG

HERMIS NR end-milling machine for aluminium profiles, display (showroom) model, reference N002/0961. Heavy-duty type with quick tool change. Has a vice that rotates in degrees and changes positions. Powerful 2 HP motor, automatic spray, two air vices for holding the profiles and a transparent safety guard. Technical specifications: Motor 2 Hp. Max. stroke 410 mm. Speed 3000 rpm. External dimensions 600 x 900 x 1200 mm. Weight approx. 100 kg. Display model, delivered with new machine warranty Auction-ID: A7-50988-14

Jig boring/Milling machine HAUSER 3DR Travel X: 400 mm Travel Y: 200 mm Travel Z: 400 mm Spindle: 2 speeds Cone:CM2 Spindle exit: 120 mm 2 speed ranges 60-1500 RPM / 1500-3000 RPM Table size: L 590 mm x W 320 mm Speed variator at the spindle 2 advances Auto descent: 0,03 mm/min - 0,06 mm/min X-axis functional with Mitutoyo devise Y and Z axis: defective scale Voltage: 380 V Width: 1500 mm Depth: 1700 mm Height in low position: 1800 mm Weight: approx 1,5 T

Heavy-duty end-milling machine for aluminium profiles, corresponding to the Hermis NR model. Equipped with a 2 HP motor, rotating vice, quick tool change, automatic spray lubrication, two pneumatic vices and a transparent safety guard. Auction-ID: A7-50988-15

Voltage: 220 V, Frequency: 50/60 Hz, Motor power: 0,75 kW, Motor speed: 2850 rpm, Max. machinable profile height: 90 mm, Max. machinable profile width: 120 mm, Arbor diameter: Ø30 mm, Max. blade width: Ø140 mm. Auction-ID: A1-50595-8

Power supply: 380V, 3 ph, 50 Hz, Total electrical power: 1.1 kW, Air consumption: 5 lt/min + spray cooling, Air pressure: 6-8 bar, Spindle speed: 15350 rpm, Min. machinable profile height: 20 mm, Max. machinable profile height: 115 mm, Max. machinable profile width: 110 mm, Router cutter dimensions: 8x5x80/120mm. Auction-ID: A1-50595-43

Power supply: 220V, 1 ph, 50 Hz, Total electrical power: 1,1 kW, Water slot milling spindle motors: 2 x 0,55 kW / 220 V / 3ph / 300 Hz, Air consumption: 9 lt/min, Air pressure: 6-8 bar, Min. machinable profile height: 40 mm, Max. machinable profile height: 120 mm, Max. machinable profile width: 150 mm. Auction-ID: A1-50595-38

Power supply: 220V, 1 ph, 50 Hz, Total electrical power: 0.75 kW, Copy router spindle motor: 0.75kW / 220 V / 3 ph / 50 Hz, Air consumption: 5 lt/min + spray cooling, Air pressure: 6-8 bar, Spindle speed: 14000 rpm, Min. machinable profile height: 20 mm, Max. machinable profile height: 130 mm, Max. machinable profile width: 130 mm, Router cutter dimensions: 8x5x80/120mm. Auction-ID: A1-50595-20

2 router cutters, each with an 8 mm cutting diameter and an 8 mm shank diameter, Motor power: 1,1 kW + 1,1 kW, Motor speed: 12000 rpm, Power supply: 380 Vac - 3 phases, Air consumption: 8 l/min. Auction-ID: A1-50595-30

Electrical supply: 220Vac/50Hz, Motor power: 0.85kW, Motor speed: 32000 rpm, Profile routing height: min. 40mm, max. 100mm, Cutter diameter: 8mm/5mm/80mm Auction-ID: A1-50595-5

Power supply: 380V, 3 ph, 50 Hz, Electrical power: 0,75 kW, Copy router spindle motor: 0,75 kW / 380 V / 3 ph / 50 Hz, Air consumption: 9 lt/min, Air pressure: 6-8 bar, Min. machinable profile height: 40 mm, Max. machinable profile height: 120 mm, Max. machinable profile width: 150 mm, Copy routing capacity: x: 260mm / y: 105 mm / z: 90mm, Router cutter dimensions: Length: 80-120 mm / Diameter: Ø8mm. Auction-ID: A1-50595-15

Table surface: 1.524 x 355 mm , Width of slots: 18 mm , Longitudinal travel of the table: 3 - 1016 mm/min. Fast traverse 2.400 mm/min , Transversal travel of the table: 3 - 1016 mm/min -Fast feed 2,400 mm/min, Distance between slots: 100 mm , Number of Slots T: 3, Longitudinal travel: 1.220 mm , Transversal Race: 508 mm , Vertical travel: 508 mm, Spindle cone: ISO 50 , Main engine power: 7,36 Kw, Voltage: 380/220 V, Included Accessories: Dimension display, faceplate axes, cutters, shims, cones, chucks