milling machines used for sale (2,464)

This 5-axis HWACHEON D2-5AX 12k was manufactured in 2021. It features an X-axis travel of 600 mm, Y-axis travel of 550 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of up to 12,000 rpm and a tool magazine capacity of 30 places. If you are looking to get high-quality machining capabilities, consider the HWACHEON D2-5AX 12k vertical machining centre we have for sale. Contact us for further details.

This 3-axis ISEL FlatCom M30 DoppelFlat 75-35 was manufactured in 2016. It features a complete sound-insulated safety enclosure with sliding viewing doors and a swivel-mounted CNC control console. The machine is equipped with a top-mounted multi-port suction hood and integrated pneumatic pressure regulators. If you are looking to get high-quality milling capabilities, consider the ISEL FlatCom M30 DoppelFlat 75-35 gantry milling machine we have for sale. Contact us for further details.

- 2013 Overhauled by REIDEN SWISS- New regrinded- New iTNC530- New Hr410 Handwheel- New CE-Safety - New Milling head gears and bearing- New LS186C Glas scales- New Blum TC60 3D taster- Geomtrical DIN 8615 !- Overhauling cost CHF 250k

Technical details & equipment: Speed range: 20 – 5,000 rpm Table dimensions: 800 x 400 mm X-axis travel range: 600 mm Y-axis travel range: 350 mm Z-axis travel range: 600 mm Table load: 300 kg ​ Tool Changer: Equipped with two tool turrets, each with 12 places. Accessories: Chip conveyor included. Company history: The machine ran in gentle single-shift operation. Condition: The machine has been dry and protected in a closed room for 15 years. Due to the long service life, damage to the stand cannot be ruled out. Known defect: The position detection of the tool turrets is currently without function and needs to be repaired (presumably repair of the corresponding card required). With manageable effort, the machine can be restored to a very good operating condition. Important notes: The sale is made as a used machine to self-collectors. All information has been ...

Wärmebehandlungsöfen Wärmeofen Wärmeprozessöfen Warmhalteofen Warmluftofen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Haubenofen Schachtofen Sonderanlagen Durchlauföfen Herdwagenöfen Kammeröfen Schachtöfen Schmelzöfen Industrieöfen gebraucht Industrieöfen Neubauten Industrieöfen gebraucht Plasmanitrieranlagen Drehherdöfen Drehtrommelöfen Durchlauföfen Herdwagenöfen Induktionshärteanlagen Kammeröfen Ofenanlagen Schachtöfen Vakuumöfen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Haubenofen Schachtofen Sonderanlagen Härt en GlühenNormalisieren Weichglühen Isothermglühen Vergüten Anlassen Entspannen Hubschritt-Kettenförderofen Ringherdofen Kammerofen Durchstoßofen Drehherdofen Rollenherdofen Gußplattenbandofen Reinigungsanlagen

This 3-axis DMG DECKEL MAHO DMC 63 V was manufactured in 2003. It features an X-axis travel of 630 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine is equipped with a Siemens 840D control unit and has a spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 63 V vertical machining centre we have for sale. Contact us for further details.

Horizontal machining centre manufactured in 2004. This IRLE IRD 1600 CNC features a maximum pipe diameter processing capability of 1,625 mm and a maximum pipe length of 13,200 mm. It supports a maximum pipe wall thickness of 70 mm and can handle pipe weights up to 250 kN. If you are looking to get high-quality machining capabilities, consider the IRLE IRD 1600 CNC machine we have for sale. Contact us for further details.

This 3-axis KNUTH X-Mill 640 was manufactured in 2015. It features a travel of 640 mm on the X-axis, 400 mm on the Y-axis, and 500 mm on the Z-axis. The machine is equipped with a Siemens 828D control unit and a 16-fold double-arm tool changer. If you are looking to get high-quality machining capabilities, consider the KNUTH X-Mill 640 vertical machining centre we have for sale. Contact us for further details.

This 3-axis SPINNER VC450 was manufactured in 2014. It features an X-axis travel of 450 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The machine includes a robust table size of 770 x 410 mm and a maximum table load of 200 kg. If you are looking to get high-quality machining capabilities, consider the SPINNER VC450 vertical machining center we have for sale. Contact us for further details.

This 3-axis Mazak VTC 300C II was manufactured in 2012. It features a spindle speed of 12,000 RPM and a tool capacity of 30 tools in the automatic tool changer. The machine has a generous travel of 1740 mm in the X-axis, 760 mm in the Y-axis, and 660 mm in the Z-axis. If you are looking to get high-quality machining capabilities, consider the Mazak VTC 300C II vertical machining centre we have for sale. Contact us for further details.

This 4-axis Okuma MA-600HB horizontal machining center was manufactured in 2005. Ideal for complex machining tasks, it offers robust construction and precision. The machine have room for 320 tools in ATC, preparation for Fastems and Concept2000 conveyor. Consider the opportunity to buy this Okuma MA-600HB horizontal machining center. Contact us for more information.

This 3-axis Soraluce SP 8000 was manufactured in 2000. It features an impressive X-axis travel of 6,500 mm, Y-axis travel of 1,250 mm, and Z-axis travel of 2,000 mm. The machine is equipped with a high-torque spindle motor and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the Soraluce SP 8000 universal machining centre we have for sale. Contact us for further details.

This 3-axis DAEWOO MYNX 550 was manufactured in 2003. It features an X-axis travel of 1,200 mm, Y-axis travel of 650 mm, and Z-axis travel of 620 mm. The machine is equipped with a maximum spindle speed of 10,000 rpm and a tool magazine capacity of 24 positions. If you are looking to get high-quality machining capabilities, consider the DAEWOO MYNX 550 vertical machining centre we have for sale. Contact us for further details.

This 3-axis Eikon MV2 was manufactured in 2003. It features an impressive X-axis travel of 1500 mm, Y-axis travel of 300 mm, and Z-axis travel of 350 mm. The machine is equipped with an automatic tool changer with 20 positions and a maximum tool diameter of 80 mm. If you are looking to get high-quality machining capabilities, consider the Eikon MV2 vertical machining centre we have for sale. Contact us for further details.

This 5-axis DOOSAN VC 630/5Ax was manufactured in 2013. It features an impressive X-axis travel of 650 mm, Y-axis travel of 765 mm, and Z-axis travel of 520 mm. The machine includes a maximum workpiece weight capacity of 500 kg and a spindle speed of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN VC 630/5Ax universal machining centre we have for sale. Contact us for further details.

MAHO MH 800 P - Tool Milling Machine - Recording: ISO40 - X/Y/Z: 700 / 450 / 500 mm - Occasionally problems with the measuring system due to contamination - Occasional failures during rapid traverse - in this case the machine must be switched off and on - Year of construction 1980 Technical data Main Gear: - Sliding gear geometrically stepped: 1.25 - Number of gears: 18 Horizontal & vertical milling spindle: - Speed range: 40 - 2000 rpm - Tool holder: ISO 40 - Tool clamping: hydromechanical - Quill stroke vertical/horizontal: 100 mm Quill feed gear (vertical): - Autom. Quill feeds: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Workspace (manual & automatic): - Longitudinal adjustment (X-axis): 700 mm - Vertical adjustment (Y-axis): 450 mm - Headstock (Z-axis): 500 mm Feeds: - Infinitely variable in X/Z: 10 - 500 mm/min - Infinitely variable in Y: 5 - 250 mm/m ...

Offered for sale is an Optimum toolroom milling machine. Drilling capacity in steel: 30mm, continuous drilling capacity in steel: 25mm, spindle taper: ISO40, quill travel: 120mm, milling head swivel range: +/-45°, cross table X/Y: 1000mm/240mm, max. cross table load: 160kg, X/Y/Z travel: 580mm/200mm/340mm, X-axis table feed: 720mm/min. Including accessories. The tray has been cut open on the right-hand side so that longer workpieces can also be machined. Dimensions X/Y/Z: approx. 2270mm/1500mm/2100mm, weight: approx. 900kg. An on-site inspection is possible.

A Caser-Saimp universal milling machine in need of repair but still operational is offered. Spindle taper: ISO 40, table size X/Y: approx. 1300mm/265mm, travel X/Y/Z: approx. 750mm/265mm/430mm, max. spindle speed: 1700rpm, spindle drive power: approx. 4kW. The X-axis can no longer be moved using the power feed. A servo motor was retrofitted to the X-axis (white assembly). Inspection possible by arrangement.

ACCTEK AKM2030 CNC router was built in 2020 in China by Jinan Acctek Machinery CO., Ltd. The machine is designed for the precise milling, cutting and engraving of parts made from materials such as wood, MDF and plastics. Its large work area, combined with a stable design, makes the machine ideal for both one-off projects and mass production. All machining processes are performed using a high-performance electro-spindle with a maximum speed of 24000 rpm. The rotational speed and torque are controlled by an inverter, allowing the operating parameters to be adjusted to suit the current task. The electro-spindle is also equipped with a cooling system, which helps maintain stable parameters during intensive use of the machine. Individual axes are driven by high-torque stepper motors. These move along precision linear guides, ensuring accurate positioning and repeatability of the parts p ...

Manufacturer: Z-Mat Model: F 1060 Condition: Used Stock number: 9404 Control system: FANUC Operating hours: 150 h Work table length: 1200 mm Work table width: 600 mm Maximum table load (uniform): 600 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 1000 mm Y-axis travel: 600 mm Travel Z axis: 500 mm Number of all tools: 24 pieces Spindle: BT-40 Machine height: 2400 mm Machine length: 2700 mm Machine width: 2150 mm Machine weight: 6300 kg

Milling machine Macmon 100E BJ 1990

CONTROLS   HEIDENHAIN ND 780 WORKING RANGE -CUBIC-  .. among of them simultaneous CNC axes: 2   X-axis travel: 450 mm  Y-axis travel: 260 mmFLOOR PLATE  table surface (left-right): 770 mmTABLE  table surface (left-right): 770 mm  table surface (front-back): 520 mm  workpiece load (max): 200 kgSPINDLE / HEAD  spindle revolutions (min): 50 /min  spindle revolutions (max): 6300 /min  sleeve stroke: 110 mmAXIS DRIVES  traverse velocity X (max): 2000 mm/min  traverse velocity Y (max): 2000 mm/minELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1500 mm  space requirements -front/back-: 1400 mm  total height: 2100 mm  total weight approx.: 850 kgATTACHMENTS  European CE standards: yes

: gebraucht : 2002 : 4543 : prompt, Zwischenverkauf v : Spanien : 11400 €: 1 : 50 - 1700 (12) U/min: ISO 40 : 600/210/400 mm: 800 x 225 mm: 1700 mm: 1500 mm: 1960 mm: 950 kg: 1,5 kWwith 3-Axis Digital display Fabr. Time Technology EuropeSwivelling universal milling head (Huron design)Horizontal milling device with counter bearing and 1 pc. long milling arborCoolant deviceMachine lightautomatic feeds in X and YMachine feet with vibration absorbersno User ManualDOES NOT COMPLY WITH GERMAN UVV &, AUSTRIAN AMVOBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video call• RISK-FREE PURCHASE: 14-day return po ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 48800 €: 932.08 €: 40 -3200 U/min: ISO 40 : 600 x 500 x 400 mm: 1000 x 500 mm: 3.75 kW: 1814 kg: 1000 mm/min: 8 : 14 x 63 mm: 300 kg: 600 mm: 500 mm: 400 mm: 0 - 600 mm/min.: 0 - 600 mm/min.: 40 - 3200 : 40 - 3200 : +/- 90° °: 100 mm: manuell : 3,75 kW: 1200 x 250 mm: 160 - 660 mm: 95 - 495 (2. T-Nut), 180 mmswiveling operating panel3 axes digital read out Fagor 400ib Innovamotor for horizontal- and vertical spindle: 3,75 kWfeed motors with inverter for X/Y/Z: 0,75 / 0,75 / 0,75 kWball screw spindles for X/Y/Z axesmanual gear box for spindle speeds1 pc. long milling arbor 27 mm3 pcs. recustion sleeves (MK1, MK2, MK3)1 pc. drawing bar ISO40 for horizontal or vertical spindlespindle protection with switchtable safety guard with doors with switchesouter arbor support for horizontal spindleLED work lampautomatic lubrication for X/X/Z guidwa ...

X-axis: 660mm, y-axis: 350mm, z-axis: 450mm, table clamping surface dimensions: 762x356mm, speed: 10-10,000/min, tool holder: SK 40 DIN 69871, number of tool changer stations: 20, rapid traverse: 28m/min, control: ULTIMAX 4, length: 2000mm, width: 1800mm, height: 2660mm, weight: 2.9t, with documentation, documents, hydraulic diagram and electrical circuit diagram. An on-site inspection is possible.

CONTROLS  conventional BASIC DESIGN  basic design: cross bed WORKING RANGE -CUBIC-  number of processing axes (excl parallel axes): 3   X-axis travel: 1120 mm  Y-axis travel: 350 mm  Z-axis travel: 400 mm  distance spindle nose - table surface (max.): 420 mmTABLE  table surface (left-right): 1600 mm  table surface (front-back): 400 mm  workpiece load (max): 1500 kgSPINDLE / HEAD  spindle type: tilting head   - mode of operation: manual   - mode of operation: manual   spindle revolutions (max): 28 /min  number of gears: 1400   tool fixture: ISO SK 40 AXIS DRIVES  feed velocity (min): 16 mm/min  feed velocity (max): 800 mm/minELECTRICAL SPECIFICATIONS  total power consumption: 14.5 kWDIMENSIONS / WEIGHTS  space requirements -left/right-: 2700 mm  space requirements -front/back-: 2350 mm  total height: 2150 mm  total weight approx.: 3700 kgATTAC ...

Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine, vertical milling machine-Manufacturer: Steinel, vertical milling machine type SV 4-Clamping table: 740 x 200 mm-Cross table: 620 x 130 mm-Travel: X/Y/Z 340/100/300 mm-Spindle holder: MK2-Speed: 112 - 2240 rpm right/left rotation-Feed: 0.10 - 0.71 mm/min-Quill stroke: 100 mm-Coolant system-Dimensions: 1000/950/H1830 mm-Weight: 650 kg

DECKEL FP4M Universal Milling machine Mach. No. 11629, YOM 1984 X/Y/Z= 500/400/400 mm Quill stroke Z axis 90 mm Universal Tilting table : 800 x 460 mm DRO-3 axes HEIDENHAIN spindle speed : 50 to 2500 rpm Spindle taper : ST 40 max. table load 600 kg Feeds x/y/z/ 8-630 mm/min Rapid travel x/y/z/ 1300 mm/min Spindle Motor : 4 Kw Weight (approx.) : 1900 Kg Advantages of the machine: -Universal Tilting table -DRO-3 axes HEIDENHAIN -Rotary index table -Boring head -Horizontal indexing device -other accessories

A Röders RXU 1200 DSH and a Röders RXP 500 DSC are available, 1) RXU 1200 DSH, x-axis: 1000mm, y-axis: 1050mm, z-axis: 600mm, table dimensions: 895x895mm, spindle speed: 24,000/min, probe: Renishaw, number of tools: 40, control: Roders RMS6, spindle interface: HSK 40, connected load: 85kVA, weight: 33t, with paper filter. 2) RXP 500 DSC, x-axis: 425mm, y-axis: 400mm, z-axis: 240mm, spindle speed: 42,000/min, probe: Renishaw, number of tools: 40, spindle interface: HSK 40, with paper filter. An on-site inspection is possible.

x-travel: 700 / 710 mmy-travel: 275 mmz-travel: 350 mmtaper in main spindle: ISA 40 table surface area: 900 x 250 mmT-slots: 3 x 18 x 60 Stk.turning speeds: 32.0 - 2000 U/minfeed stepless: 15 - 750 mm/minvoltage: 400 Vtotal power requirement: 4.0 kWweight of the machine ca.: 1400 kgrange L-W-H: 1000 x 1400 x 1800 mm from a training workshop (vocational school)Features:- Robust, electric-motor-driven universal milling machine- With horizontal and vertical main spindles Vertical main spindle can be swiveled 360° in two planes- Sturdy T-slot clamping table with 18 mm T-slots - Electric feed control - Stepless speed adjustment - Swiveling machine light- Control cabinet, installed on the right- Original operating instructions Machine data sheetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.