We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Spline milling machine Hurth LF 32
used
Horizontal spline shaft milling machine HURTH KF 32 AH
used
Wheel diameter - max. 300 mm Spindle speeds 250 - 2800 rpm Feed min/max 45/125 mm Module 8 Taper spindle ISO 40 Partial head angle 110º Total power requirement 3 kW Machine weight approx. 1.5 t Space requirement approx. 1.5 x 1.4 x 1.9 m
used
GEAR NOISE TESTER Make : HURTH Model : ZP320 B THE MACHINE IS IN EXCELLENT CONDITIONS AND COMPLETE IN ALL ITS PARTS
used
Wedge groove machine HURTH LF32a - see pictures
used
used
diameter:500 mm workpiece weight:30 kg test dia. min.:200 mm total power requirement:0,03 kW weight of the machine ca.:1000 kg dimensions of the machine ca.:1x0,5x1,06 m
used
weight of the machine ca.: 5 t working width: max. 300 mm : 6 extensive accessories: viele Wechselräder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
: 19147 weight of the machine ca.: 4 t working width: max. 300 mm extensive accessories: viele Wechselräder max. module: 7 Module The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: for workpiece clamping on lathes, grinding machines and dividing heads with high concentricity and holding force, for workpiece clamping (bar or chuck work) in conventional single-spindle lathes and CNC lathes directly in the spindle or in the collet chuck, smooth bores are mainly used in the counter spindle of CNC lathes . - including accessories according to pictures, quantity= 49 PCS weight approx.: 10 kg, Approx. Onsite Dimension. (l x w x h): 350 x 220 x 250 mm
used
amount: 49 STK weight: 10 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. grinding diameter: 400 mm : 18010 shaving cutter - diameter: 64 - 320 mm indexing: schleifbar 1 -12 Modul shaving wheel width: max. 40 mm number of teeth: 13 - 240 roller bend diameter min./max.: 73 - 320 mm slide speeds: 5-20-30-40 Zähne/min. max. dia. of grinding wheel: 762 mm grinding wheel - swivable: 5-21 ° grinding slide swivable +/-: 2 x 35 ° total power requirement: 3 kW weight of the machine ca.: 4,2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Groove milling machine Fab. HURTH Type LFV 3Masch. -No: 3566 estimated year of construction 1963Groove width max.30.35 mmTravel X: 550 mmTravel Y: 300 mmTravel distance Z: 400 mmSpindle mount ISO: SK 40Milling carriage travel: 240 mmDepth feed screw stroke: 0-110 mmTable size: 300 x 1200 mmTable width: 350 mmProjection: 415 mm8 spindle speeds: 90-1000 rpm9 crank feeds: 1.4-22.4 p. minute9 table feeds lengthwise: 10.9-163 mm / minTable drive: 0.37 kWSpindle drive: approx. 2.5 kWSpindle deflection: 410 mmCutter diameter: max. 50 mmCutter head diameter: max. 110 mmSpindle drive approx: 2.5 kWOutside dimensions approx: 1.5 x 1.45 x 1.95 mmWeight approx: 2,2 tWith:- Deep milling device- Crank drive of the milling carriage- autom. longitudinal feedused, despite year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover ...
used
Chip centrifuge, Speed variator for the shaver, 2 points 1 hydraulic for small Ø and another manual for Ø up to 550mm / Centrifuge chips, Variable speed for shaver, 2 points for small or 1 Hydraulic and a manual for Ø up to 550mm, High: 2200 mm, Long: 1650 mm, Width: 1450 mm, Module: 8, Weight: 6,500 Kg., Voltage: 220/380 W., Total power: 6.5 Kw., Cutter ø max / min: 260/180 mm, Cutter length max / min: 30/20 mm, Maximum length workpiece: 250 mm, Ø max. / min. workpiece: 550/20 mm., Specification: Universal
used
max. wheel diameter: 0 mm max. number of teeth: 0 max. module: min. module: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC controlled milling machine for synchronous rings The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. grinding diameter: 400 mm grinding width: 0 mm max. module: min. module: total power requirement: 3 kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: m Shaver cutter Ø, min./max. 64 - 320 mm Module range 1 - 12 Shaver cutter width, max. 40 mm No. of teeth 13 - 240 Pitch block Ø 73 - 320 mm Speeds of workpiece slide 5 / 20 / 30 / 40 teeth per min. Grinding slide speed 690 rpm Grinding slide Ø 762 mm Grinding wheel swivelling (pressure angle) 5 - 21 ° Grinding slide swivelling (helical angle) 2 x 35 ° Grinding slide adjustment, vertical 240 mm Cutting speed 1 / 0.5 / 0.25 m/min Spindle drive 1.1 kW Total electrical load, approx. 3 kW - 500 V - 50 Hz Weight, approx. 4,200 kg Accessories / Special Features Machine is suitable for grinding internal and external shaver cutters. It is also suitable for master gears as well as cutters for gear shapers. Unfortunat ...
used
groove width: 16 mm x-travel: 16-200 mm table length: 1500 mm table width: 375 mm milling spindle: ISO 40 max. clampable toolpiece shaft diameter: 30 mm max. useable hobs, normal diameter: 40 mm distance between milling spindle and table: 150-250 mm axial move. of milling spindle (auto./manual): 120 mm vertical adjust. of milling slide (manual): 100 mm weight of the machine ca.: 3,1 t dimensions of the machine ca.: 2,00x1,40x2,40 m K4 - TECHDETAIL UK: 0,11 kW K4 - TECHDETAIL UK: 0,6/1,1 kW K4 - TECHDETAIL UK: 3 x 0,012-0,05 mm/U K4 - TECHDETAIL UK: 16x60 mm K4 - TECHDETAIL UK: 12 x 280 - 3550 U/min K4 - TECHDETAIL UK: 0,85 kW K4 - TECHDETAIL UK: 0-2,0 mm K4 - TECHDETAIL UK: 250 mm Condition: ready for production The machine is suitable for the manufacture of flutes and slots using undersize cutters with hydraulic adjustment. Roughing and finishing can be done in one single clamping. ...
used
max. wheel diameter: 280 mm max. number of teeth: 100 max. module: 6 min. module: 1 total power requirement: 6 kW weight of the machine ca.: 2500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.