subcategories
(3rd category level)
Manufacturer:
(Category: 103)
Key data: 1600 mm, 800 mm
CNC bed milling machine with Heidenhain control 415, good condition, hydraulic tool clamping, coolant device, central lubrication, lighting,.. Travel X1600/y800/z650/ Spindle holder SK 50 Spin elder speed 60-1800rpm Working feed rate 10-3000mm/min Rapid traverse 10m/min Table clamping surface 1800x610mm Machine weight 9500kg Table load 3000kg
CNC milling machine, cover FP3A, spare parts machine, control defective / incomplete We sell parts. of this machine, SK40 milling head, with quill, tool changer, ... Control unit, table, spindles, motors, spindle nuts, ... Or total: Euro 1800,- ex works
Tool milling machine Maho, 700C Control : Maho 432, Year of construction 1989, Mounting SK40, Process : X-700, Y-450, Z-500, quill Machine can no longer be viewed under power. Has lost parameters! Would also sell spare parts, table, milling head, drives, control, ...
Tool milling machine Maho, 700C Control : Maho 432, Year of construction 1989, Mounting SK40, Process : X-700, Y-450, Z-500, quill Machine can no longer be viewed under power. Has lost parameters! Would also sell spare parts, table, milling head, drives, control, ...
PFAUTER P630 Gear Hobbing Machine.Chip ConveyorMaximum Gear Diameter 630 mmGear Width 425 mmMaximum Module 10Table Diameter 550 mmTable Bore 125 mmMaximum Cutter Length 215 mmMinimum Number of Teeth 8Maximum Workpiece Length 825 mmDistance Milling Spindle - Clamping Surface 50 - 425 degreesMilling Slide Swivel 240 degreesSpindle Speeds 62 - 390 RPMTangential Adjustment 200 mmAxial Feeds 0.4 - 6.8 mm/revRadial Feeds 0.1 - 1.7 mm/revMaximum Cutter Diameter 192 mmTotal Power Requirement 20 kWChange Gears Set / Chip Conveyor / Coolant Tank
external diameter: - mmbore diameter in mm: - mmwidth: - mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
4 Spindle High Speed Train Milling Machine, ANGER, HCP 10/5, 2005 Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300, 4-axis +/- 180 degrees 4 high frequency spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip conveyor, ATC, recooling unit, external measuring system Renishaw Power consumption 41 kw
4 Spindle High Speed Train Milling Machine, ANGER, HCP 10/5, 2005 Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300, 4-axis +/- 180 degrees 4 high frequency spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip conveyor, ATC, recooling unit, external measuring system Renishaw Power consumption 41 kw
Lg.Nr. 26305 Technical data: - Operation via two-hand lever - Material clamping by pneumatic clamping cylinder - Workpiece width / clamping range W 115 x D 100 mm - Milling area at the top after stop / copy template. W 340 x D 100 mm - Stroke at the top T 110 mm - Milling area at the bottom after stop / copy template. W 240 x 90 mm - Stroke bottom front / rear 95 / 45 mm - Spindle speed 12000 rpm - Dosing spray device - Air consumption per work cycle - without spraying 12 ltr - with spraying 24 ltr - Left + right original material support - Drive 400 V / 0.75 kW - Space requirement approx. W 900 x H 1400 x D 1250 mm - Weight approx. 300 kg
This 3-axis FPT STINGER 180 vertical machining centre was manufactured in 2021. It features an impressive X-axis travel of 1750 mm, Y-axis travel of 1400 mm, and Z-axis travel of 800 mm. The machine is equipped with a powerful spindle speed of up to 18,000 rpm and a tool changer capable of holding 60 tools. If you are looking to get high-quality machining capabilities, consider the FPT STINGER 180 machine we have for sale. Contact us for further details.
This 3-axis FPT Raid XL gantry milling machine was manufactured in 2021. It features an impressive X-axis travel of 2000 mm, Y-axis travel of 1400 mm, and Z-axis travel of 800 mm. The machine includes a robust table size of 1100 x 2000 mm with a load capacity of 3300 kg. If you are looking to get high-quality milling capabilities, consider the FPT Raid XL machine we have for sale. Contact us for further details.
This 5-axis FPT DINOMAX gantry milling machine was manufactured in 2022. It features an impressive X-axis travel of 4000 mm, Y-axis travel of 2700 mm, and Z-axis travel of 1300 mm. The machine includes a robust table size of 2500 x 4000 mm with a load capacity of 15 t/m². If you are looking to get high-quality milling capabilities, consider the FPT DINOMAX gantry milling machine we have for sale. Contact us for further details.
This 5-axis HERMLE C 52 U was manufactured in 2015. It features an impressive X-axis travel of 1000 mm, Y-axis travel of 1100 mm, and Z-axis travel of 750 mm. The machine is equipped with a spindle speed of 18000 rpm and a table load capacity of 2000 kg. If you are looking to get high-quality machining capabilities, consider the HERMLE C 52 U vertical machining centre we have for sale. Contact us for further details.
