Key data: 300 mm, 150 mm, 250 mm
Hello, We hereby offer you a used universal/vertical milling machine, type SH 4 D, from the manufacturer Steinel. Manufacturer: Steinel Model SH 4 D with vertical milling head FRP 3 Machine No. 8160 Travels X-Y-Z axis X = 300mm, Y = 150 mm. Z = 250mm. Table dimensions 740 x 200 mm Clamping surface 620 × 130 mm Spindle speed 32 – 1250 rpm Feed stages 0.2 / 0.32 / 0.5 / 0.63 / 1 / 1.6 mm/min Quill stroke / drilling spindle stroke 100 mm Power main motor 1.5 kW Weight approx. 800 kg Dimensions approx. 1,100 × 1,300 × 1,600 mm Conventional control Note: The aforementioned technical data have been taken from the operating instructions, brochures of the manufacturer or other sources, for which we cannot assume any liability for the correctness and completeness. Scope of delivery: 1 piece used Universal/Vertical Milling Machine, Steinel, Type SH 4 D Area of ap ...
CONTROLS HEIDENHAIN TNC 128 WORKING RANGE -CUBIC- X-axis travel: 610 mm Y-axis travel: 400 mm Z-axis travel: 450 mmTABLE table surface (left-right): 800 mm table surface (front-back): 425 mm workpiece load (max): 300 kgSPINDLE / HEAD spindle revolutions (max): 4500 /min tool fixture: ISO SK 40 AXIS DRIVES traverse velocity X (max): 2000 mm/min traverse velocity Y (max): 2000 mm/min traverse velocity Z (max): 2000 mm/min rapid traverse X: 5000 mm/min rapid traverse Y: 5000 mm/min rapid traverse Z: 4000 mm/minDIMENSIONS / WEIGHTS space requirements -left/right-: 1800 mm space requirements -front/back-: 1800 mm total height: 2000 mm total weight approx.: 2300 kgATTACHMENTS ...
Technical data shown on picture. Parts shown by hand not come.
spindle diameter: - mmx-travel: 1250 mmy-travel: 630 mmControl: Heidenhain TNC 426 / 430 total power requirement: 48 kWweight of the machine ca.: 12 tdimensions of the machine ca.: ca. 5 x 6 x 4 m mCNC jig boring machine / vertical machining centreoverhauled in 2000Spindle ISO 50,speed range 30-3000 min-1max. torque 522 Nmfeeds 3-2000 mm, rapid traverse 10 m/minmax. distance spindle nose - table surface 725 mmProjection spindle centre - stand 800 mm.Space requirement approx. 5 x 5 m,Weight approx. 12 tonnesThe machine was completely overhauled and modernised in 2000 with digital drives anddrives and Heidenhain controlFixed table 1200 x 71036-fold tool changer,coolant system,the pictured magnetic clamping table is not included in the scope of delivery ! -Working area: 1250 x 630 x 560Drive: 44 kWControl: Heidenhain TNC 426 PBThe data for this ad was created with ModulMWS - the software so ...
Inv. Num. : 7816 Type: FGS 130 Producer: Droop Created: 1983 Parameters: Work table length: 4200 mm Work table width: 1200 mm Maximum workpiece weight: 10000 kg Spindle drive power: 22 kW X-axis travel: 3000 mm Y-axis travel: 650 mm Travel travel Z-axis: 350 mm Machine length: 7000 mm Machine width: 4000 mm Machine weight: 39500 kg
x-travel: 1200 mmy-travel: 350 mmz-travel: 350 mmtable-size: 1800x405 mmspindle taper ISO: 50 spindle turning speed range: 30-1800 U/minweight of the machine ca.: 4.4 tMisc accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
DECKEL MAHO DMC 63 V CNC vertical machining center was built in Germany in 2005. The machine used in series and unit production, is characterised by its high machining capacity and stable construction with a reinforced work table, which ensures the highest possible precision in milling. The installed FANUC 180i-MB CNC controller additionally guarantees trouble-free operation of the machine and the use of its full potential and capabilities. The DECKEL MAHO GILDEMEISTER CNC machining center has been serviced on an ongoing basis and has worked for 26040 hours to date. Technical data of the DECKEL MAHO DMC 63 V milling center - work table dimensions (L x W): 800 x 500 mm - feed rates in the X/Y/Z axis: 630/500/500 mm - positioning accuracy of the X,Y,Z axis: 0.010 mm - maximum spindle rotational speed: 10000 rpm - spindle taper: SK 40 - 24-position tool magazine - operating hours: ...
x-travel: 630 mmy-travel: 500 mmz-travel: 500 mmControl: CNC total power requirement: 13 kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
EXTRON L610 CNC vertical machining center was built in 2008 in Taiwan. Distinguished by its extensive machining capabilities, high precision and reliable components, the machine is ideal for every production facility, even during the most intensive and demanding challenges. The high-quality design with sliding doors additionally efficiently dampens any vibrations and ensures maximum process stability. The EXTRON L 610 milling center machines workpieces on a large T-slot table using reliable tools placed in a 20-position head and a powerful spindle rotating at a maximum speed of 8000 rpm. All process parameters are programmed in the intuitive FANUC Series 0i-MC CNC control with many useful features that minimise the operator’s need to operate the machine. The EXTRON machining center weighs 5750 kg. Technical data of the EXTRON L610 CNC milling machine - CNC controller: FANUC Seri ...
x-travel: 1400 mmy-travel: 630 mmz-travel: 600 mmControl: Heidenhain total power requirement: 15 kWweight of the machine ca.: 5,85 tdimensions of the machine ca.: 1800x630 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Table clamping surface: 300 x 1100 mm Travel x: 780 mm Travel y: 250 mm Travel z: 410 mm Cbgaxkvf39 Spindle holder: SK 40 Pinole stroke: 100 mm Spindle speeds: 31.5 - 1400 rpm Feeds longitudinally and transversely: 12.5 - 630 mm/min Feeds vertical: 6.3 - 315 mm/min electr. Connection: 380 V, 5.5 kW Space requirement: 1770 x 1500 x 2050 mm Weight: approx. 2200 kg
x-travel: 1250 mmy-travel: 600 mmz-travel: 600 mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
REALMECA MINI C3X-CNC VERTICAL 1 phase machining milling machine Used for teaching begginers. Perfect condition
x-travel: ca. 900 mmy-travel: ca. 280 mmz-travel: ca. 400 mmtotal power requirement: 5 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 2,52,52,5 mNo. 5100:1 used vertical milling machineFRITZ WERNER, type FV 2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Vertical Milling Machine Droop & Rein type FS130 Travel X 2000 mm Travel Y 1000 mm Travel Z 1000 mm Spindle SA 50 Sensitive spindle exit: 200 mm Rotation from 31,5 to 1600 RPM Table size 2400 x 1070 mm Year of construction 1976 Throat depth 950 mm Head Tilt head Spindle motor 22 kW Scale HEIDENHAIN 3 axes New electrical panel in 2006 Voltage 380 V Width 3500 mm Depth 4700 mm Total height 4500 mm Weight 26 T
x-travel: 600 mmy-travel: 350 mmz-travel: 500 mmtotal power requirement: 3 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 2,5 x 2,5 x 2,5 mNo. 3701Vertical console milling machineHESSAPP HC 50 etWorking area: 600 x 350 x 500Drive: 2,3Control: Heidenhain TNC 135 / IndramatTable surface 1180 x 330 mmSpeed range 70 - 6000 rpmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 450 mmy-travel: 300 mmz-travel: 240 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mBrand: MatheysType: 2BTable length: 850 mmTable width: 235 mmX: 450 mmY: 300 mmZ: 240 mmMaximum speed: 2.500 RPMVariable adjustable speedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
