Tool-Milling Machines used for sale (139)

Control Heidenhain ... TNC 430 Clamping table surface... 800 x 400mm Axis X ... 500mm Axis Y ... 400mm Axis Z ... 400mm ISO 40 Spindle speed ... 0-4000 rpm. Max. workpiece weight ... 300kg L x W x H ... 2800x2700x1980mm Machine weight ... 2600kg Main engine power ... 5.5kW The machine is in good condition.

Equipment: - Heidenhain digital display - Coolant system x-travel 700 mm y-travel 400 mm z-travel 350 mm Table size 920 x 300 mm Conventional control Mounting SK40 Speed range 40 - 2000 rpm Quill stroke 50 mm Total power requirement 2.4 kW Machine weight approx. 1.1 t Dimensions L x W x H 1.4 x 1.6 x 2.1 m Auction-ID: A7-49782-544

IMPORTANT - PLEASE READ If you are interested, please contact us by phone. Location of the machine on request Sale preferably from location, buyer organizes dismantling and transport For sale is a high-precision tool milling machine from the Austrian manufacturer EMCO, model FB-5 (Emcomat). This industrial machine is appreciated in toolmaking, prototyping and training workshops for its excellent geometry and reliability. Equipped with universal table as well as horizontal & vertical spindle for maximum versatility in milling and drilling work including extensive accessory package (various cutter holders/SK40 taper; clamping devices etc.)

Machine number: 344169Operating voltage: 400 VFrequency: 50 HzRated current: 20 AConnection: 12 kVAControl: HEIDENHAINTable dimensions: 650 x 350 mmwith 5 groovesGroove spacing: 63 mmMax. load: 250 kgTravel X-axis: 400 mmTravel Y-axis: 320 mmTravel Z-axis: 400 mmMax. distances top of the table to horizontal spindle center: 140 - 540 mmTop of the table to vertical head bottom edge: max. 430 mmTool holder: SK 40Speed: from 0 - 4000 rpmQuill stroke vertical: 60 mmVertiakl head swivel on both sides: 90° Feed longitudinal and transverse: 0 - 2000 mm/minRapid traverse longitudinal and transverse: 5 m/minFeed vertical: 0 - 2000 mm/minRapid traverse vertical: 4 m/min Auction-ID: A7-49089-475

Tool milling machine Maho, 700C Control : Maho 432, Year of construction 1989, Mounting SK40, Process : X-700, Y-450, Z-500, quill Machine can no longer be viewed under power. Has lost parameters! Would also sell spare parts, table, milling head, drives, control, ...

Grinding range: 400 × 800 mmControl cabinet: SiemensCircuit diagram: 170525_1Rated current: 27 ANet: 3 Phase-50 HZ-400 V. Auction-ID: A7-49604-12

Table size: 400 x 800 mm Travel x/y/z: 620/420/400 mm Quill Hub: Spindle holder: SK 40 Vertical milling head can be swivelled in 2 planes Spindle speeds: 63 - 3150 rpm electr. Connection: 400 V Space requirement: 1800 x 1700 x 1900 mm Weight approx.: 1.9 t

Serial number: 4038Operating voltage: 380 VFrequency: 50 HzRated current: 13 ASpeed range: 40 – 2000 rpmTool holder: SK 40Feed range: infinitely adjustable, all axes: 5 – 500 mm/minCreep traverse: 4 mm/minRapid traverse: 1200 mm/minRange of movement: X: 290 mm / Y: 150 mm / Z: 330 mmVertical milling head can be moved on spindle block: 100 mmMovement spindle: Rotation of the dial for longitudinal movement: 4 mm Transverse and vertical movement: 2.5 mmGraduation of the scale disc: 0.02 mmTable dimensions: 600 x 210 mmwith 4 groovesReference: Showroom Auction-ID: A7-49056-30

MAHO MH 800 P - Tool Milling Machine - Recording: ISO40 - X/Y/Z: 700 / 450 / 500 mm - Occasionally problems with the measuring system due to contamination - Occasional failures during rapid traverse - in this case the machine must be switched off and on - Year of construction 1980 Technical data Main Gear: - Sliding gear geometrically stepped: 1.25 - Number of gears: 18 Horizontal & vertical milling spindle: - Speed range: 40 - 2000 rpm - Tool holder: ISO 40 - Tool clamping: hydromechanical - Quill stroke vertical/horizontal: 100 mm Quill feed gear (vertical): - Autom. Quill feeds: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Workspace (manual & automatic): - Longitudinal adjustment (X-axis): 700 mm - Vertical adjustment (Y-axis): 450 mm - Headstock (Z-axis): 500 mm Feeds: - Infinitely variable in X/Z: 10 - 500 mm/min - Infinitely variable in Y: 5 - 250 mm/m ...

Universal Milling Machine - Huron Head - Mounting device for Huron head - horizontal counter holder - Documentation - Coolant system - Machine feet x-travel 700 mm y-travel 250 mm z-path 300 mm Table size 1000 x 230 mm Spindle holder ISO 40 Spindle speeds 35- 1500 rpm Total power requirement 3.0 kW Machine weight approx. 1.4 t Dimensions L x W x H 1.55 x 1.4 x 1.65 m Auction-ID: A7-49782-457

Ref.nr. 00937 Name of the tool milling machine Manufacturer: Hermle Model UWF 800 HS 57 Year of manufacture 1995 general overhauled (Investment of approx. 41,158 euros) Condition Functional Remark: Non-functional digital display of the setting values. The setting values can be read mechanically on the screw wheels. Accessory box: With clamping sets, shaft extensions, mounts, etc. The digital display for the setting parameters does not work. The machine can otherwise be used in full working order, the setting parameters can be read manually on the adjustment wheels. Extensive accessories including mounts, shaft extensions, etc. are attached according to photo. Customer writes: System is fully functional, except that the digital setting display no longer works. But all settings can be read analogously on the machine. Deadline CW 43/2026 [Oct. 19-23, 2 ...

Equipment: - Digital display - Coolant system - Huron milling head - Emergency stop facility - Documentation x-travel 710 mm y-travel 250 mm z-travel 400 mm Table size 1200 x 300 mm Conventional control Mounting SK40 Speed range 50 - 2500 rpm Total power requirement 2.2 kW Machine weight approx. 1.7 t Dimensions L x W x H 2.1 x 2.0 x 1.6 m Auction-ID: A7-49782-413

For sale is a classic universal tool milling machine Deckel FP4A with Dialog 11 control. The machine comes from a company closure and was reliably in use until the end. The machine was stored and was not energized for a long time. Due to the downtime, the buffer batteries of the control system will probably have to be replaced and the machine parameters reset. Manufacturer: Lid Model: FP4A Control: Dialog 11 Tool holder: SK40 Working range approx.: X: 400mm / Y: 300mm / Z: 400mm The machine is at ground level and dry. The transport must be taken care of by the buyer himself. An indoor crane, pallet truck, forklift, etc. are available on site for loading. The machine can be viewed by appointment. To make an appointment, call 0171 216 414 3 from Mon. - Fri. 9:00 a.m. to 5:00 p.m.

Technical data Manufacturer: Friedrich Deckel Aktiengesellschaft Type: FP4M Machine No.: 2203-8891 Control: HEIDENHAIN TNC 123 Operating voltage: 400 V, 3-phase Travel X/Y/Z: up to 500 / 400 / 400 mm (Source: Online research) Spindle speed: 18 steps, 50–2,500 min⁻¹ (Source: Online research) Tool holder: SK 40, M16 (Source: online research) Quill stroke: 90 mm (Source: online research) Feed rate: 8–630 mm/min (Source: Online research) Rapid traverse: 1,300 mm/min (Source: Online research) Clamping table: 800 x 460 mm, 7 T-slots (source: online research) Max. table load: approx. 400 kg (source: online research) Machine weight: approx. 1,450 kg (Source: Online research) Configuration Universal tool milling machine with HEIDENHAIN TNC 123, active/positioning function in X, Y, and Z, T-slot clamping table, coolant device, mobile control panel, and DECKEL supports. Note No technical d ...

Tool Milling Machine DECKEL FP 3 Heidenhain Digital Display -Well-maintained original condition -Travel X/Y/Z 500x300x400mm -Feeds / rapid traverses in all 3 - axes -Tool holder ISO 40 -Speed range 40 - 2000 rpm -Vertical / horizontal milling device -Angle table -Coolant device -Central lubrication -Chip tray -Documentation Dimensions: LxWxH 1.7x1.2x1.8 meters / Weight 1350 kg

Equipment: - Digital display - Coolant system - Milling head with quill x-travel 600 mm y-travel 400 mm z-travel 320 mm Table size 900 x 420 mm Conventional control Mounting SK40 Speed range 35.5 - 1800 rpm Quill stroke yes mm Total power requirement 5.0 kW Machine weight approx. 1.45 t Dimensions L x W x H 1.6 x 1.2 x 1.9 m Auction-ID: A7-49782-444

Universal / Tool Milling Machine DECKEL FP 1 & 3-Axis Heidenhain Digital Display -Very neat original condition -Travel X/Y/Z 300x150x340mm -Speed range 40-2000 rpm - Automatic / feeds / inputs in two axes -Vertical / horizontal milling device -Tool holder ISO 40 -Rigid angle table -3 - Axle digital display Heidenhain -Coolant device -Chip tray -Documentation Dimensions: LxWxH 1.1x0.8x1.7 meters / Weight 700Kg

Horizontal milling machine - Incl. partial table x-travel 780 mm y-travel 220 mm z-travel 410 mm Table length 1100 mm Table width 270 mm Spindle speeds 40 - 960 rpm Spindle holder SK 40 Total power requirement kW Machine weight approx. 1.7 t Space requirements approx. 1.8 x 1.6 x 1.8 m Condition: unchecked (6) Auction-ID: A7-49782-515

Tool milling machine DECKEL FP 2 LB from university in well-maintained original condition -3 - Axis digital display "ACURITE" -Travel X/Y/Z 795x300x400mm -Automatic feeds / rapid traverses in all 3 axes (18 pieces) -Spindle speeds 40-2000 rpm (18 pieces) -Horizontal + vertical milling device - ISO 40 - Tool holders -Table clamping surface 1000x440mm -Table clamping surface with additional table 1000x700mm -Vertical head swivel with drilling quill -Coolant device -Various tool holders -Machine light -Documentation Dimensions: LxWxH 2.5x2.4x1.8 meters / Weight 2200Kg

Milling machine with - Heidenhain TNC 135 - Rapid traverse - Milling head with hydr. Tool sparing - Coolant system - Central lubrication x-travel 1000 mm y-travel 450 mm z-travel 450 mm Table clamping area 1370 x 400 mm Number of T-slots 5 pcs. Spindle speeds: 32 - 1500 rpm Tool holder SK 50 Total power requirement 7.0 kW Machine weight approx. 3.1 t Dimensions L x W x H 2.1 x 1.7 x 1.9 m Auction-ID: A7-49782-409

Tool Milling Machine Deckel FP2E -Extremely smooth running + fully functional -Automatic feeds + rapid traverse in X + Z axis -Machine with sliding head means larger Y-travel -Travel X/Y/Z 400x200x400mm -Speed range 40-2000 rpm -Tool holder ISO 40 -Vertical horizontal milling device -Vertical head swivel with drilling quill -Angle table -Various tool holders -Documentation Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight 1500Kg

Machine equipped with: - Digital display - Machine light - Coolant device - Machine feet Technical Details / Accessories / Addition: Value Unit Technical data: x-travel 600 mm y-travel 270 mm z-travel 430 mm Upper slide - travel 630 mm Table size 1120 x 270 mm Spindle speeds: 45 - 1660 rpm Spindle holder SK 40 Conventional control Spindle drive 2.2 kW Total power requirement 2.4 KVA Machine weight approx. 1.35 t Dimensions L x W x H 1.8 x 1.4 x 1.8 m Auction-ID: A7-49782-472

Tool milling machine Deckel FP 2 / 3-axis digital display"NEW"/ORIGINAL CONDITION -Travel X/Y/Z 400x200x400mm -Table clamping surface 700x350mm -Speed range 40-2000 rpm -Feeds & rapid traverses in all three axes -Tool holder ISO 40 -Vertical / horizontal milling device -Coolant device -3-axis digital display "NEW" -Spindle nut X-axis "NEW" -Machine feet -Documentation Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight 1600Kg

General Description Universal toolroom milling machine manufactured by AVIA, model FOP. Designed for precision milling, drilling, boring and general toolroom machining. The machine features both horizontal and vertical spindle configurations for versatile machining operations. Technical Details Manufacturer: AVIA Model: FOP Machine type: Universal toolroom milling machine Horizontal spindle with arbor mounting Vertical swivelling milling head Power-feed work table Mechanical gearbox Universal milling configuration Separate electrical control cabinet Condition Used industrial condition. The machine appears complete with horizontal spindle, swivelling vertical milling head, power-feed table, mechanical gearbox and separate electrical cabinet. Operational status, spindle condition and machining accuracy have not been tested. Auction-ID: A7-49124-28

TOS FNGJ 40 tool milling machine with 3-axis Heidenhain digital display -Travel X/Y/Z 600x400x400mm -Automatic feeds + rapid traverses in all three axes -Spindle speeds of 63-3150 rpm -Tool holder ISO 40 -Hydraulic tool clamp -Angle table 800x400mm -Vertical - Horizontal milling device -Vertical head swivel with quill -Coolant device -Tool trolley + tool holders + milling tool -Counter bearing + horizontal milling spindle -Clamping block for tool holders -Machine feet -Documentation Dimensions: LxWxH 2.5x2x2.3 meters / Weight 2600 kg

Equipment: - ELESTA digital display - Feed infinitely variable - Coolant system - Horizotale milling device - Chip protection - Chip trays - hydr. Vise - Machine light - Documentation x-travel 1200 mm y-travel 400 mm z-travel 460 mm Table size 1500 x 400 mm Conventional control Mounting SK40 Speed range 45 - 2000 rpm Quill stroke yes mm Total power requirement kW Machine weight approx. 3.2 t Dimensions L x W x H 2.8 x 2.5 x 2.1 m Auction-ID: A7-49782-441

Travels: X-axis 500 mm, Y-axis 200 mm, Z-axis 400 mm Tool holder SK 40, spindle speed 40-2000 rpm, Table clamping area 830 x 240 mm, weight of the machine 1,100 kg Equipment and accessories: • Vertical milling head with quill • Feeds and rapid traverse in all 3-axes • Various tool holders, collets • Hydraulic vise • Coolant device • Documentation • Bellows damaged

Universal Milling Machine - Digital display - Chip protection - Coolant system - Machine light - Chip tray x-travel 560 mm y-travel 300 mm z-travel 420 mm Table size 1055 x 240 mm Spindle holder ISO Sk 40 Spindle speeds 40 - 1550 rpm Total power requirement 5.5 kW Machine weight approx. 1.3 t Dimensions L x W x H 1.6 x 1.5 x 1.85 m Auction-ID: A7-49782-401

Clamping surface of the fixed angle table: 195 x 605 mm Table movement longitudinal/vertical automatic and by hand: 290/300 / 330/340 mm Headstock transverse movement by hand: 150 mm Spindle holder: ISA 40 16 spindle speeds: 40 - 2000 rpm 16 feeds: 10 - 500 mm/min Spindle drive motor: 380 V, 1/1.4 kW Weight approx.: 660 kg Space requirement: 1200 x 900 x 1570 mm

Technical data Manufacturer: DECKEL MAHO GmbH Type: FP1 Active Serial number: 2102-3698 Year of Make: 1989 Speed range: 40–2,000 rpm, 16 steps Tool holder: SK40 (Source: online research) Feed: 5–500 mm/min, infinitely variable (Source: Online research) Rapid traverse: 1,200 mm/min (Source: Online research) Drive power: 1.5 / 1.9 kW, factory data FP1 active (source: online research) Voltage: 380 V Dimensions: approx. 1,100 x 900 x 1,550 mm (Source: Online Research) Weight: approx. 700 kg Configuration 3-axis Heidenhain digital display, separate control cabinet, horizontal milling holder, swivelling work table, coolant system and machine light. (Source: Online research) Remarks The article comes from a company liquidation and was actively used in the training workshop until the company closed. Note No technical documentation available. information researched to the best of my know ...

Tool milling machine Emco FB3 Movements in X-Y-Z = 300-200-350 mm spindle with quill ISO-30 ISO-30 horizontal spindle Angle head swivels by ±90° Feed and rapid traverse in X and Y Angle table 600 x 180 mm Digital display Heidenheim ND780 Year of Make: 2006 Cleaned and tested

Equipment: Swivelling milling head: ±90° with automatic feed, central lubrication, coolant device, adjustable feeds and digital displayNote: Hydac high pressure pump unit and power supply from Poenix have been renewed Spindle mount: SK40Machine weight: approx. 1,400 to 2500 kg. Auction-ID: A7-49604-13

Offer 25434 Technical data: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Autom. Quill feed - Quill stroke - Wind cutting device 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories

General Description Universal tool milling machine manufactured by FU321, designed for precision milling, drilling, boring and general toolroom machining. The machine is equipped with a vertical milling head, power-feed work table and mechanical gearbox for versatile machining operations. Technical Details Model: FU321 Machine type: Universal tool milling machine Vertical milling head installed Power-feed work table Mechanical speed/feed gearbox Manual feed controls Machine vice included Original lubrication chart intact Condition Used industrial condition. The machine appears complete with vertical head, power-feed table, gearbox, machine vice and feed controls installed. The work table appears straight and the original lubrication chart is present. Operational status, spindle condition and machining accuracy have not been tested. Auction-ID: A7-49124-46

Tool Milling Machine Cover FP4MK 2203 Travel XYZ: 500-400-400 mm Spindle mount: ISO 40 Spindle speeds: 50-2500 Universal Rotary Table 2038 incl. Angle Counter VRZ560 Active Digital Display 3 Axes Heidenhain TNC113 Hydraulic drawbar for DIN 2080 Quill with 90 mm stroke Coolant system Incl. vice Weight approx. 1700 kg Year of construction approx. 1992

Technical data Manufacturer: Friedrich Deckel Aktiengesellschaft Type: FP1 Active (Source: Online Research) Year of adaptation control: 1989 Serial Number Adjustment Control: 25955 Operating voltage: 3~380V, 50/60Hz Rated current: 11 A Control voltage: 24 V DC Control/display: HEIDENHAIN TNC 113, 3 axes X/Y/Z (Source: Online research) Spindle speed: 40–2,000 min⁻¹ (Source: online research) Tool holder: SK40 (Source: online research) Configuration Active digital display with positioning function (Source: Online research) Swivelling vertical milling head T-slot work table Separate adjustment control / control cabinet Machine Light Note No technical documentation available. information researched to the best of my knowledge and belief. No guarantee is given for completeness and correctness. The article comes from a company liquidation and was actively used in the training workshop un ...

Offer 25434 Specifications: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Quill stroke 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories

Control: HEIDENHAIN TNC 155Tool holder: SK 40Table dimensions: 760 x 390 mmwith 6 groovesAttention: the vices on the clamping surface are not included in the scope of delivery!Travel X-axis: 500 mmTravel Y-axis: 400 mmTravel Z-axis: 400 mmincl. post SK 40 Tool holdersReference: Option - Lot 43 Auction-ID: A7-49056-87

Offer 25434 Specifications: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Quill stroke 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories

Milling machine with - Toolmaker's table - Heidenhain digital display - Rapid traverse - Coolant system - Central lubrication - Machine feet - Incl. drawer cabinet with contents x-travel 600 mm y-travel 400 mm z-travel 400 mm Table clamping area 720 x 410 mm Spindle speeds 40 - 2000 rpm Tool holder SK 40 Total power requirement 3.0 kW Machine weight approx. 1.4 t Dimensions L x W x H 1.8 x 1.6 x 1.9 m Auction-ID: A7-49782-411

DECKEL FP 2 Tool Milling Machine Machine Details: Manufacturer: Lid Type: FP 2 Year of construction: approx. 1978 Condition: very good, technically tested and partially overhauled Availability: available on order The Deckel FP 2 is considered the reference among universal milling machines – robust, precise and reliable. Specifications: Travel: X-axis: approx. 400 mm Y-axis: approx. 200 mm Z-axis: approx. 400 mm Spindle: Speed range: approx. 40–2000 rpm Tool holder: ISO 40 Drive power: approx. 2.2 kW Tool clamping: manual Feeds: 8–400 mm/min Rapid traverses: approx. 1.5 m/min Digital display: 3-axis SINO Dimensions (LxWxH): approx. 2000 x 1500 x 1800 mm Weight: approx. 800 kg Equipment & Accessories: Vertical & horizontal milling equipment Drill quill 3-axis digital display SINO Coolant Setup Work light C ...

Mitutoyo LH-600 digital height measuring instrument with QM-Data 100 control/display unit. Measuring range 600 mm, powered on and display visible in the photos. Suitable for quality control and workshop inspection. Auction-ID: A1-49190-58

Universal tool milling machine DECKEL FP 1 With 3 axes active digital display Heidenhain TNC 123 Year of Make: 1994 Travel: X 300 Y 160 Z 340 Speed range: 40 – 2000 rpm With the following accessories: Rigid angle table 600 mm x 250 mm clamping surface Sliding vertical milling head Extendable drill quill Stepless feed via potentiometer 1 pc. machine vise 1 pc. counter holder with counter bearing 1 pc. milling mandrel long 0 22 mm , 0 16 mm , 0 27 mm Various tool holders S 22 x 2 Bellows Z axis 1 chip protection Machine Light Automatic central lubrication pump Coolant Setup Operating instructions THE MACHINE IS IN TOP CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!

DECKEL FP1 Universal Tool Milling Machine - Overhauled in 1999 by HARICH Equipped with work table, machine vice and separate control cabinet Tool cabinet with various tools, milling cutters, clamping devices, tool holders, drills and other machine accessories Instruction manual and technical documentation are also available Auction-ID: A1-49712-12

Specifications Manufacturer: Saeilo Type: FP3-A Control: Contur M Year of Make: 2021 Travels: X 400 mm Y 300 mm Z 375 mm Clamping area: 400 x 800 mm Speed: 50 – 2,000 rpm Tool holder: SK40 Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included Coolant Setup Table cabin Electronic handwheel Hydraulic tool clamping Machine Light

converted high-speed aluminum milling machine Auction-ID: A1-48552-80

X / Y / Z = 320 x 180 x 300 mm Feed in 3 axes Stepless feed Digital display 3 axes

General Description Universal toolroom milling machine manufactured by AVIA, model FOP. Designed for precision milling, drilling, boring and toolroom machining. The machine is equipped with both vertical and horizontal spindle configurations, providing high versatility for a wide range of machining operations. Technical Details Manufacturer: AVIA Model: FOP Machine type: Universal toolroom milling machine Vertical spindle with quill Horizontal spindle with arbor support Swivelling universal milling head Mechanical feed gearbox Separate electrical control pendant Condition Used industrial condition. The machine appears complete with vertical spindle, horizontal spindle support, universal milling head, mechanical feed gearbox and separate electrical control pendant. Operational status, spindle condition and machining accuracy have not been tested. Auction-ID: A7-49124-27

X / Y / Z = 400 x 300 x 350 mm Feeds in the 3 axes Rapid traverse in 2 axes ISO 40

Technical data Manufacturer: Fabryka Obrabiarek Precyzyjnych AVIA Type: FNF-40P Serial Number: 50691 Year of Make: 1998 Weight: 1,650 kg Spindle speed: 63–3,150 min⁻¹ Display: HEIDENHAIN 3-axis digital display Configuration Universal tool milling machine with vertical milling head, T-slot clamping table, manual handwheels and separate control panel. CE marking available. Remarks The article comes from a company liquidation and was actively used in production until the plant closed. Auction-ID: A7-49302-148