subcategories
(3rd category level)
Manufacturer:
(Category: 103)
ALZMETALL GS 1000/5-T CNC 5-axis machining center stable gantry design equipped with NC rotary tilting table and torque motors for backlash-free and highly dynamic direct drives in A and C axis simultaneous 5-axis machining possible equipped with 3D interpolation look-ahead TCPM and free contour programming water-cooled high-frequency motor spindle with thermal compensation (Therm-Ex) and air blow through spindle high-pressure coolant system extensive coolant equipment with band filter high-pressure pump and chip conveyor oil mist extraction system (LTA) integrated measuring systems with 3D probe (M&H) and laser tool measurement (Blum) collision monitoring (DCM) pick-up tool changer system automatic central lubrication LED working area lighting full enclosure
POS POSmill H 800 U – 5-axis machining centerThe machine is designed as a 5-axis machining center and features a swivel axis with a range of -120° to +120°, as well as a rotary table with a continuously rotating 360° C-axis. A separate A-axis is not available. The working area is realized by a high-quality Kessler rotary table with a diameter of 800 mm. The machine is not equipped with a pallet changer.A key highlight is the 96-position tool changer, making the machine ideal for series production as well as complex machining tasks. In combination with the integrated through-spindle coolant system (IKZ) with 50 bar, the machine is well suited for demanding applications in toolmaking and the automotive industry.Operating data:Control ON: approx. 25,280 hMachine ON: approx. 24,730 hProgram run: approx. 9,150 hSpindle hours: approx. 8,555 h
5-Axis Machining Center GF Machining Solutions MIKRON UCP 800 DuroCNC: Heidenhain iTNC 530Axis TravelsX-axis: 800 mmY-axis: 650 mmZ-axis: 500 mmRotary AxesC-axis 360° continuous swivel rangeSpindle / Adapter TypesNCD 150 PL – NCD 200 PLTool Interface HSK-E63Operating HoursControl ON: 30,064 hMachine ON: 10,322 hProgram Execution: 4,159 hDrives ON: 7,331 hSpindle ON: 4,231 hEquipmentChip conveyorCoolant system with filtration unitDocumentation available
The machine was originally manufactured in collaboration between Waldrich Coburg and Waldrich Siegen as a heavy CNC gantry milling machine for the industrial large-part and heavy-duty machining sector.63 kW milling and drilling unitNC universal milling headB and C axisAutomatic tool changer60-slot tool magazine ISO50 / SK50IKZEnclosed work areaHeavy industrial constructionElectronic handwheelSiemens Sinumerik 840DHeavy CNC gantry milling machine from Waldrich Siegen for machining large and heavy workpieces.The machine comes from an ongoing industrial project / plant closure and is already dismantled or prepared for transport.Particularly interesting for:Heavy-duty machiningLarge-part machiningMechanical and plant engineeringSteel constructionTool and mold makingImportant note:The machine must be picked up from Rüsselsheim by the end/mid-June at the latest due to short-term plant clearan ...
KEKEISEN PFW-T 4000/12 portal milling machine in a heavy, rigid design for machining large and heavy workpieces.Travel paths of 4,000 x 2,700 x 1,200 mm and a large worktable of approximately 4,000 x 1,800 mm with a table load capacity of 10,000 kg enable the machining of large-volume components.The machine is equipped with a universal milling head with 2 swivel axes and 5 - 1 degree steps NC controlled - adjustable positions (manually or optionally NC-controlled). Hirth gearing ensures precise angle settings.Powerful main spindle drive with approximately 30 kW. Speed range 20 – 7,000 rpm, maximum torque of approximately 1050 Nm.Additional equipment includes a 60-tool changer (KWE60), chip conveyor, KNOLL filtration system, Hydac cooling units, and central lubrication.Feed rate up to 4 m/min, rapid traverse up to 18 m/min, and feed forces of approximately 30,000 N per axis underscore t ...
DMG DECKEL MAHO DMF 180 travelling column machining center,equipped with Heidenhain iTNC 530 control.Machine equipped with 40 bar through-spindle coolant (IKZ), 60-position tool magazine (chain type with double gripper), chip conveyor, electronic handwheel, air blast through spindle, M&H infrared probe and full enclosure.Table size approx. 2,100 x 700 mm.Operating hours: control ON approx. 63,700 h, machine ON approx. 22,500 h, cutting time approx. 7,750 h
POS PosMill Type C1050 – Universal Milling MachineUniversal milling machine with travel paths X 1,050 mm / Y 530 mm / Z 630 mm and table size 1,150 x 560 mm.CNC control HEIDENHAIN iTNC 530.Hydraulic system for precise movements.Equipment: Coolant system and chip conveyor.Machine with protective devices and emergency stop system.
POS PosMill Typ 1100 3-axis CNC milling machineVertical CNC machining center with a machine table size of approx. 1,050 x 600 mm.Equipped with a HEIDENHAIN TNC 430 CNC control.Automatic tool changer.Equipment: cooling system with through-spindle coolant (IKZ), hydraulic system, and chip conveyor.
Hermle C 600 V vertical CNC machining centre, manufactured in 2002, with a Heidenhain TNC 430 control system. The machine has travel ranges of approx. 600 x 450 x 450 mm and is equipped with an SK40 spindle and a tool changer. A chip conveyor and a complete coolant system are included, meaning the machine is ready for immediate use. The machine is in used but fully functional condition and can be demonstrated whilst powered up.
Heavy CNC bed milling machine by Droop & Rein in solid cast design for machining large and heavy workpieces. The machine is equipped with a Heidenhain TNC 430 control and was overhauled in 2002.Equipped with a powerful 30 kW milling spindle, SK50 holder, and a swiveling milling head (±45°) for flexible machining operations. The robust construction ensures high stability and precision even in demanding machining tasks.The machine is powered on and can be inspected at any time.
AUERBACH AX 5 B CNC bed milling machine was built in 2009 in Germany by Auerbach Maschinenfabrik GmbH. It is an extremely efficient machine designed for even the most demanding production challenges. The AUERBACH AX5 B enables the machining of large, heavy workpieces that are used, e.g. in the aerospace and automotive industry. The machining process is performed fully automatically on the rotary table by means of a 5-axis swivel workhead. This solution enables comprehensive machining of workpieces in a single work cycle, without the need for repositioning them. The workhead is equipped with an electro-spindle rotating at a maximum speed of 12000 rpm. It provides the excellent dynamics required for both roughing and finishing operations. The cutting tools, on the other hand, are continuously cooled to increase their overall service life. The AUERBACH AX 5B CNC machining center is offered ...
MAZAK MTV 414 CNC vertical machining center was built in 1992 in the United Kingdom by YAMAZAKI MACHINERY UK LTD. The offered machine is an excellent choice for machining workpieces with a maximum weight of 500 kg. Thanks to its reliable components and extremely rigid design, the MAZAK MTV 414 guarantees the best machining results throughout its service life. The machining process is performed inside a large work area with a work table with a length of 900 mm and a width of 410 mm, a spindle and a capacious tool magazine. The spindle, driven by a powerful motor, rotates at a maximum speed of 7000 rpm and operates in three X,Y,Z axes with feeds of 560 mm, 410 mm and 460 mm respectively. All cutting tools are stored in a 24-position tool magazine with an automatic tool changing system (ATC). All this is complemented by the intelligent MAZATROL M32B CNC controller with its intuitive interfa ...
Main spindle with drive motor, universal milling head, milling chuck, milling extension, angle milling head, top slide, top slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper tool slide from Mikron VC500D CNC milling machine -Motor: INNDRAMAT 165V 5.5 kW see photo type plate 100C-B050B1-AS03 -Speed: 1500/8000 rpm -Spindle head: SK40 mount -Dimensions: 910/1120/H510 mm -Weight: 365 kg
Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Manufacturer: MIKRON, milling machine table T-slot table from CNC machining center type VC500D -Table surface: 400 x 900 mm -T slots: Slot width 18 mm, slot spacing 125 mm -Transport dimensions: 400/900/H175 mm -Weight: 288 kg
Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Manufacturer: Deckel MAHO, milling machine table T-slot table from CNC machining center -Table surface: Ø 800 mm -T slots: Slot width 14 mm, slot spacing 63 mm -Transport dimensions: 800/800/H300 mm -Weight: 355 kg
A CNC 3-axis milling machine Emco is available. Travel X/Y/Z: 900mm/500mm/500mm, table dimensions X/Y: 1000mm/520mm, max. table load: 800kg, speed: 10000rpm, spindle power: 11kW, tool holder: SK40, rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 2600mm/2450mm/2950mm, weight: approx. 4800kg, control: Siemens Sinumerik 828D. Documentation available. An on-site inspection is possible.
x-travel: 450 mmy-travel: 350 mmz-travel: 400 mmmilling-head swivable +/-: 90° spindle taper: SK40 spindle turning speed - stepless: 10-5000 U/minweight of the machine ca.: 2 tdimensions of the machine ca.: 2.5 x 2.1 x 2.1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
travel -x axis: 3.000 mmtravel -y axis: 1.500 mmtravel -z axis: 2.000 mmcontrol: HEIDENHAIN - iTNC 530 turning speed range: 0 - 6.000 U/minwith NC rotary table: 1.600 x 1.400 mmworkpiece weight: 12.000 kgnumbers of positions in the tool changer: 40 tool taper: SK50 CNC Bed Type Milling Machine - Universal | MTE - RT-3000 equipped with integrated NC-rotary table , ITC (20 bar), radio measuring probe and 40-way tool changer.The machine is in good condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.A machine video from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: RT30 | RT 30The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 4-axis TAJMAC-ZPS H63 Standard was manufactured in 2005. It features a robust Siemens control system, X-axis travel of 1010 mm, Y-axis of 800 mm, and Z-axis of 1010 mm. The work table measures 800 mm in length and 630 mm in width. Ideal for precision machining, buy this TAJMAC-ZPS H63 Standard horizontal machining centre. Reach out for more information.
travel -x axis: 8.000 mmtravel -y axis: 2.600 mmtravel -z axis: 1.500 mmcontrol: HEIDENHAIN - iTNC 530 turning speed range: 20 - 5.000 U/minnumbers of positions in the tool changer: 60 tool taper: SK50 clamping plate: 10.000 x 2.500 mmCNC Milling machine | SORALUCE - FP-8000 equipped with radio measuring probe, 60-way tool changer and clamping plates.The machine is in good condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine videos from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: FP8000 | FP 8000The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
travel -x axis: 2.500 mmtravel -y axis: 1.000 mmtravel -z axis: 1.250 mmcontrol: HEIDENHAIN - TNC 530 turning speed range: 20 - 4.000 U/minwith NC rotary table: 1.000 x 1.000 table surface area: 2.700 x 850 mmnumbers of positions in the tool changer: 40 tool taper: SK50 CNC Bed Type Milling Machine | SORALUCE - TA-25-A equipped with NC-rotary table, radio measuring probe and 40-way tool changer.The machine is in good condition and can be inspected under power.For additional equipment information please refer to the original order confirmation which is included in the offer of this machine.The machine videos from the production plant will be shared on request.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: A25A | TA-25 A | TA 25 A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 560 mm: 320 mm: 400 mm: 950x450 mm: 1050x320 mm: 25-3600 U/min: SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 560 mm: 320 mm: 400 mm: 950x450 mm: 1050x320 mm: 25-3600 U/min: DIN 69871 SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 5-axis DMG Ultrasonic 10 was manufactured in 2010. It features a maximum spindle speed of 40,000 rpm and a travel of 220 x 20 x 280 mm. The machine is equipped with a Siemens 840D solutionline control and has a maximum table load of 10 kg. If you are looking to get high-quality machining capabilities, consider the DMG Ultrasonic 10 vertical machining centre we have for sale. Contact us for further details.
This 4-axis HELLER MCH 250 was manufactured in 2006. It features a maximum spindle speed of 6000 rpm and a robust tool capacity of 100 tools in the automatic tool changer. The machine is equipped with twin pallets, enhancing productivity and efficiency. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details.
This 4-axis HELLER MC 16 was manufactured in 1999. It features a maximum spindle speed of 8000 rpm and is equipped with a tool magazine that holds 40 tools. The machine also includes a twin pallet system for enhanced productivity. If you are looking to get high-quality machining capabilities, consider the HELLER MC 16 horizontal machining centre we have for sale. Contact us for further details.
This 3-axis HERMLE U 630 T was manufactured in 2001. It features an X-axis travel of 630 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine includes a table size of 900 x 528 mm and a maximum table load of 400 kg. If you are looking to get high-quality machining capabilities, consider the HERMLE U 630 T vertical machining centre we have for sale. Contact us for further details.
This 3-axis HAAS VF-1 was manufactured in 2020. It features a working area with X-axis travel of 508 mm, Y-axis travel of 406 mm, and Z-axis travel of 508 mm. The machine includes a maximum spindle speed of 8,100 RPM and comes equipped with a Renishaw OTS tool setter and a tool magazine. If you are looking to get high-quality machining capabilities, consider the HAAS VF-1HE-D vertical machining centre we have for sale. Contact us for further details.
This 3-axis MAHO 1600S universal machining centre was manufactured in 1989. It has approximately 38,800 machine hours and was operational until 2025 without notable issues. The machine features a functional coolant system and comes with available manuals and documentation. If you are looking to get high-quality machining capabilities, consider the MAHO 1600S machine we have for sale. Contact us for further details.
This 3-axis Mazak NEXUS 410A vertical machining centre was manufactured in 2006. It features an X-axis travel of 560 mm, Y-axis travel of 410 mm, and Z-axis travel of 510 mm. The machine has a maximum spindle speed of 12,000 rpm and a tool capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the Mazak NEXUS 410A machine we have for sale. Contact us for further details.
