milling machines used for sale (2,485)

x-travel: 300 mmy-travel: 200 mmz-travel: 350 mmspindle turning speed range: 80-2200 U/mintable-size: 600 x 200 mmdimensions of the machine ca.: 1400 x 1150 x 1600 mmxmmxmmweight of the machine ca.: 0.6 tmisc. accessories: Digital read-out 3 axeswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 560 mmy-travel: 320 mmz-travel: 400 mmtable-size: 950 x 450 mmtable load: 300 - 350 kgtool adaptor: ISO 40 turning speeds: 25 – 2000 / 2240 U/minquill stroke: 95-100 mmvertical head swivelling: 90 Gradrapid traverse: 1400 mm/mintotal power requirement: 2,8 kWweight of the machine ca.: 1,7 tdimensions of the machine ca.: 1,8 x 1,6 x 1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300-320 mmy-travel: 240-270 mmz-travel: 300-310 mmtable-size: 670 x 320 mmtool adaptor: ISO 40 turning speeds: 45-2240 U/minquill stroke: 60 mmhead swivability: 360 °feed: 12,5 - 630 mm/Urapid traverse: 1200 mm/minweight of the machine ca.: 1 tdimensions of the machine ca.: 1,265 x 1,08 x 1,62 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300-320 mmy-travel: 240-270 mmz-travel: 300-310 mmtable-size: 670 x 320 mmtool adaptor: ISO 40 turning speeds: 45-2240 U/minquill stroke: 60 mmhead swivability: 360 °feed: 12,5 - 630 mm/Utotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 200 mmz-travel: 350 mmfeed power: 160 kpspeed: 20 - 200 mm/minrapid traverse: 1200 mm/mintotal power requirement: 1,4 kWweight of the machine ca.: 0,45 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal milling machine MIKRON WF3DCM/155 Heidenhain TNC 155 Internal machine no. 58 Travels: X-axis: 500 mm Y-axis: 500 mm Z-axis: 350 mm Table surface: 800 x 450 mm Mount: SK 40 DIN ISO Machine weight: approx. 2.3 t

: 420 mm: 220 mm: 380 mm: 840x390 mm: 950x250 mm: 65-2600 U/min: DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 420 mm: 220 mm: 380 mm: 840x390 mm: 950x250 mm: 65-2600 U/min: DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 420 mm: 220 mm: 380 mm: 840x390 mm: 950x250 mm: 65-2600 U/min: DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS   HEIDENHAIN ND 780 WORKING RANGE -CUBIC-  .. among of them simultaneous CNC axes: 2   X-axis travel: 450 mm  Y-axis travel: 260 mmFLOOR PLATE  table surface (left-right): 770 mmTABLE  table surface (left-right): 770 mm  table surface (front-back): 520 mm  workpiece load (max): 200 kgSPINDLE / HEAD  spindle revolutions (min): 50 /min  spindle revolutions (max): 6300 /min  sleeve stroke: 110 mmAXIS DRIVES  traverse velocity X (max): 2000 mm/min  traverse velocity Y (max): 2000 mm/minELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1500 mm  space requirements -front/back-: 1400 mm  total height: 2100 mm  total weight approx.: 850 kgATTACHMENTS  European CE standards: yes

CONTROLS  conventional BASIC DESIGN  basic design: cross bed WORKING RANGE -CUBIC-  number of processing axes (excl parallel axes): 3   X-axis travel: 1120 mm  Y-axis travel: 350 mm  Z-axis travel: 400 mm  distance spindle nose - table surface (max.): 420 mmTABLE  table surface (left-right): 1600 mm  table surface (front-back): 400 mm  workpiece load (max): 1500 kgSPINDLE / HEAD  spindle type: tilting head   - mode of operation: manual   - mode of operation: manual   spindle revolutions (max): 28 /min  number of gears: 1400   tool fixture: ISO SK 40 AXIS DRIVES  feed velocity (min): 16 mm/min  feed velocity (max): 800 mm/minELECTRICAL SPECIFICATIONS  total power consumption: 14.5 kWDIMENSIONS / WEIGHTS  space requirements -left/right-: 2700 mm  space requirements -front/back-: 2350 mm  total height: 2150 mm  total weight approx.: 3700 kgATTAC ...

This 5-axis Mazak V515/40N was manufactured in 2006. It features a maximum workpiece dimension of 1,300 mm x 550 mm x 680 mm and a robust table size of 1,300 mm x 550 mm with a maximum table load of 1,500 kg. The machine offers a rapid traverse rate of 26 m/min in X/Y and 20 m/min in Z. If you are looking to get high-quality milling capabilities, consider the Mazak V515/40N vertical machining centre. Contact us for further details.

This 5-axis DECKEL MAHO DMU 80P hi-dyn was manufactured in 2005. It features impressive travels of 800 mm in X, 700 mm in Y, and 600 mm in Z. The machine is equipped with a Heidenhain iTNC 530 control and a maximum spindle speed of 6,300 rpm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 80P hi-dyn universal machining centre we have for sale. Contact us for further details.

This 3-axis Hurco VMX 42 vertical machining centre was manufactured in 2004. It features a table clamping surface of 1270 x 610 mm and travels of 1060 mm in the X-axis and 610 mm in both Y and Z axes. The machine has a maximum table load of 1100 kg and a spindle speed range of 10 - 10,000 RPM. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 42 machine we have for sale. Contact us for further details.

Three old Hermle and Deckel milling machines are available. 1) Horizontal milling machine Hermle FW 801, tool holder: SK40, travel X/Y/Z: 430mm/150mm/420mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2250mm/1700mm/1500mm, weight: approx. 1000kg. 2) Universal milling machine Hermle FW 710, tool holder: SK30, table dimensions X/Y: 710mm/190mm, travel X/Y/Z: 400mm/150mm/350mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 700kg. 3) Deckel FP 2, year of manufacture: 1987, tool holder: SK40, travel X/Y/Z: 300mm/2200mm/400mm, table dimensions X/Y: 620mm/390mm, max. table load: 250kg, speed: 3150rpm, feed: 3600mm/min, rapid traverse: 4000mm/min, machine dimensions X/Y/Z: approx. 2500mm/2100mm/1800mm, weight: approx. 1250kg, control: Heidenhain TNC 355. An on-site inspection is possible. Individual sale possible, however a package sale is preferre ...

Brother Speedio S700X2Year of manuf. : 2022 Control : Sonstige Brother C00 Speed : 10000 rpmMovement X/Y/Z : 700/400/300 mmTool holder : BBT 30 ____________Description:Mainspindle:Technology:DirectdriveSpeed:10.000 rpmPower (max.):26,2 kWTorque (max.):92 NmTaper:BBT 30Workingtable:Clampingsurface:800 x 400 mmTableloading (max.):250 kgIn general:Toolmagazine:21 StationsRapid travers in X/Y/Z:50/50/56 m/minEquipment/Accessory:Chipmanagement:Chip coveyorCoolingmanagement:Minimumlubrication (IKZ), Company Lubrix V54.-Axis:Lehmann EA-510 with CounterbearingWorkpiececlamping:Hydrulic, 80-210 barContactcontrol:PneumaticAutomationinterface I:Automatic Door (electrical)Automationinterface I:RobotinterfaceOilmistseparation:Mechanical extraction, company Sara UC1 SDColumnextention:150 mmSetup operations:Electronic HandwheelFurther Equipment:Trafo

Litz LU 400Year of manuf. : 2016 Control : Heidenhain TNC 640 Speed : 12000 rpmMovement X/Y/Z : 400/350/350 mm____________Description:Spindle:Technology:DirectdriveSpeed:12.000 rpmPower (max.):13 kWTorque (max.):95 NmTaper:SK40NC-Swivelroundtable:B-Axis:-50°/+110°C-Axis:360°Clampin gsurface:ø450 mmTableloading (max.):200 kgIn general:Toolmagazine:48 StationsRapid travers in X/Y/Z:48 m/minEquipment/Accessory:Positionsensor:Direct Scales in X/Y/ZChipmanagement:Chip conveyorCoolingmanagement:Internal cooling unit with filter and High-pressure, 30 barWorkpiecemeasurement:Touch probe, Heidenhain TS740Toolmeasurement:Laser, Renishaw NC4 TXSetup operations:Electronic HandwheelFurther Equipment:SpindlechillerFurther Accessory:Misc. used Toolholder

Urban AP-B 4000 ProfilbearbeitungszentrumYear of manuf. : 2016 Control : Heidenhain TNC620 Movement X/Y/Z : 4100/420/300 mmTool holder : SK40 ____________Description:In general:Model:AP-B 4000 Automatic Profile Machining CenterMachining length:4,000 mmTravel ranges X/Y/Z:4,100 / 420 / 300 mmMachine cover:Pneumatically operated, opens upwardControls:Operator terminal can move along the machineControl:Heidenhain TNC 620 CNC controlAdditional control:Heidenhain HR130 handwheelTable specifications:Size 16 T-slots, mounted longitudinally to the X-axisWorking surface:4,200 x 420 mmSpindle:Motor power:14 kW S1 / 19 kW S6Motor cooling:Water with additiveSpeed range:100 to 14,000 rpmTorque:74 Nm S1 / 100 Nm S6Drilling capacity in St 60/aluminum:25 mm/30 mmThread size in St 60/aluminum:M20/M30Tool magazine:Tool holder:SK 40Tool clamping system:Spring-loaded clamping system with 9 kN clamping ...

Belotti FLU 2617Year of manuf. : 2023 Control : Siemens 840Dsl Speed : 24000 rpmMovement X/Y/Z : 2600/1700/950 mmTool holder : HSK-A63 ____________Description:Spindle:Technology:Swivelhead with MotospindleSpeed:24.000 rpmPower (max.):15 kWTorque (max.):14,3 NmTaper:HSK-A63A-Axis:+/- 120°C-Axis:270°In general:Toolmagazine:18 stationsClampingsurface:2.350 x 1.700 mmRapid travers in X/Y/Z:80/80/60 m/minEquipment/Accessory:Workpiecemeasurement:Touch probe, m&h RWP 20.50Toolmeasurement:Laser, HexagonToolbreakagecontrol:Probe, m&h TS 35.20Setup operations:Electronic Handwheel3D-Extruder:CEAD S25Granulatedryer-/conveyor:VismecFurther Accessory:Spindlechiller

Macmon M100 Universal Milling Machine with Horizontal Head -Milling spindle -Number of spindle speeds: 16 -Spindle speeds: 40, 63, 80, 100, 125, 160, 200, 250, 320, 400, 500, 630, 800, 1000, 1250, 2000 rpm -Spindle Inner Taper: ISO 40 -Collet bore up to: 25 mm Ø -Spindle block -Spindle block displacement by hand: 170 mm -Vertical milling table -Size of the clamping surface: 640 × 195 mm -2 T-slots, width/spacing: 12 / 90 mm -Longitudinal movement automatic/manual: 290 / 310 mm -Vertical movement automatic/manual: 310 / 340 mm -Feed gearbox -Number of feeds: 16 - Feed size (mm/min): 9, 14, 18, 22.4, 28, 35.5, 45, 56, 71, 90, 112, 140, 180, 224, 280, 450 -Motion spindles -Longitudinal movement of the table (1 turn): 5 mm -Vertical movement of the table (1 turn): 2.5 mm -Spindle block movement (1 turn): 2 mm -1 graduation line (longitudinal and vertical): 0.02 mm -1 ...

Macmon M100 Universal Milling Machine with Vertical Head -Milling spindle -Number of spindle speeds: 16 -Spindle speeds: 40, 63, 80, 100, 125, 160, 200, 250, 320, 400, 500, 630, 800, 1000, 1250, 2000 rpm -Spindle Inner Taper: ISO 40 -Collet bore up to: 25 mm Ø -Spindle block -Spindle block displacement by hand: 170 mm -Vertical milling table -Size of the clamping surface: 640 × 195 mm -2 T-slots, width/spacing: 12 / 90 mm -Longitudinal movement automatic/manual: 290 / 310 mm -Vertical movement automatic/manual: 310 / 340 mm -Feed gearbox -Number of feeds: 16 - Feed size (mm/min): 9, 14, 18, 22.4, 28, 35.5, 45, 56, 71, 90, 112, 140, 180, 224, 280, 450 -Motion spindles -Longitudinal movement of the table (1 turn): 5 mm -Vertical movement of the table (1 turn): 2.5 mm -Spindle block movement (1 turn): 2 mm -1 graduation line (longitudinal and vertical): 0.02 mm -1 G ...

Tool milling machine Deckel FP 2 / 3-axis digital display Heidenhain ND 780 -Travel paths X/Y/Z: 450 x 200 x 400 mm -Table clamping surface 700 x 350/tilt-swivel rotary table -Speed range: 40–2000 rpm -Feeds & rapid traverses in all three axes -Tool holder: ISO 40 -Vertical/horizontal milling device with vertical sliding head -Coolant device -3-axis digital display: Heidenhain ND 780 -Documentation -Chip tray -Various tool holders -Collets Dimensions: LxW xH 1.5x1.7x1.8 meters / Weight 1600Kg

HERMLE UWF 802 M universal milling machine with HS 401 route control -HS 401- Track control -Travel X / Y / Z 500x430x400mm -Rigid angle table -Speed range 18-3550 rpm -Feed continuously variable in all three axes 0-1600 mm/min -Rapid traverses 0-1.6 m/min in all three axes -Vertical - Horizontal milling device -Tool holder ISO 40 -Hydraulic tool clamping -Central lubrication -Chip tray -Drive power 6 KW -Work light -Spindle protection -Documentation Dimensions LxWxH 1.9x1.8x1.9 meters / Weight: 1800Kg

x-travel: 600 mmy-travel: 400 mmz-travel: 400 mmtable surface area: 720 x 410 mmspindle turning speed range: 40 - 2000 U/min: mm/minfeeds Z-axis: mm/mintool taper: SK 40 total power requirement: 3,0 kWweight of the machine ca.: 1,4 tdimensions: 1,8 x 1,6 x 1,9 mMilling machine with- Toolmakers table- Heidenhain digital readout- Rapid traverse- Coolant system- Central lubrication- Machine feet- incl. drawer unit with contentsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 200 mmz-travel: 350 mmtable surface area: 700 x 270 mmtaper in main spindle: ISO 40 turning speeds: 8: 150 - 1660 U/minturning speed range - horizontal: 8. 110 - 1230 U/minfeeds: 8: 25 - 285 mm/minweight: 900 kgquill stroke: 60 mmtotal power requirement: 3,7 kWrange L-W-H: 1,3 x 1,38 x 1,65 mCondition: ready for operation: Video available on our website.: CE signed: Condition: ready for operation: Video(s) available on our website.: Electric 380 Volt: Cooloing pump: Digital readout 2 axis: x+y / Digidata KNT 7000 Fixed working table: Vertical milling head swivelling +quill adjustment: chip pan: Swiveling table: 600 x 250 mmSlotting head: Hub 80 mmUniversal tool milling machine 3-axis-digital read out and swivelingvertical milling head with quill, fixed + swiveling table, slotting head, automatic feeds and rapid traverse in all three directions. Machin ...

This 3-axis WEMAS VZ 750 CENTURY was manufactured in 2001. It features an X-axis travel of 750 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine includes a Heidenhain TNC 426 control unit, an electronic handwheel, and a tool changer. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 750 CENTURY vertical machining centre we have for sale. Contact us for further details.

This 3-axis MILLTRONICS RH 20 vertical machining centre was manufactured in 2014. It features a substantial table size of 1,372 mm x 508 mm and impressive X-axis travel of 1,016 mm. The machine is equipped with a 24-station automatic tool changer and a spindle speed of 10,000 RPM. If you are looking to get high-quality machining capabilities, consider the MILLTRONICS RH 20 machine we have for sale. Contact us for further details.

DMG MORI DMU 210 P Universal Machining Center in heavy-duty duoBLOCK design for 5-axis positioning and simultaneous machining.The machine features a Heidenhain TNC 640 3D control system and a large working area of X 2,100 mm / Y 2,100 mm / Z 1,250 mm.The machining center is equipped with a continuously positioning universal milling head with a controlled B-axis and an integrated motor spindle. The swivel range extends from the horizontal position to a maximum of 250°. Additionally, the machine is equipped with an NC rotary table Ø 1,700 mm with direct path measurement system and 360° positioning. The permissible table load is approximately 8,000 kg.The SK50 motor spindle reaches speeds from 20 – 12,000 rpm with a power output of 52 kW / 42 kW and a torque of up to 430 Nm.Tool magazine as a wheel magazine with 63 tool positions and double gripper.Equipment includes, among others:IKZ  ...

DMG MORI DMU 160 P Universal Machining Center in heavy-duty portal / duoBLOCK design for 5-axis positioning and simultaneous machining. Equipped with Heidenhain TNC640 control and designed for high-precision heavy-duty machining in tool, mold, and mechanical engineering.Large working area with integrated NC rotary table and controlled B-axis milling head for complex 5-axis machining. The machine concept is designed for maximum rigidity, thermal stability, and high long-term accuracy.The machine features SK50 spindle technology, a wheel magazine with 63 tool positions, and a double gripper system. Through-spindle coolant supply and extensive measurement and process optimization systems are available.Equipment includes, among others:Oil and emulsion mist separator with mechanical filterBlow air through the spindle centerBlum Laser NT Hybrid tool measurementM&H infrared measuring probe3 ...

HEYLIGENSTAEDT HEYMUNILL 3200-P in heavy-duty portal design with fixed crossrail, suitable for machining large and heavy workpieces.Large working area with travels of X 6,000 mm / Y 5,000 mm / Z 1,500 mm, as well as a table size of approx. 5,000 x 3,000 mm and a table load capacity of approx. 50,000 kg.Portal clearance approx. 3,220 mm width / 2,050 mm height.5-axis machining / milling headsA- and B-axis (swivel axes in the milling head)C-axis (360° rotation)Simultaneous 5-axis machining possible (with fork head)Milling heads:Straight milling head FK 120/34090° angle head WFK 100/750MFork head FK 100/2DMilling head magazine:5 positionsAutomatic milling head changeAdditional equipment:Internal cooling (IKZ) approx. 7 barTool changer 32 positions (SK50, Fibro ATC 32/50)Tool holder SK50 (DIN 69871)Tool measuring system (laser)Chip conveyorCoolant systemAdaptive feed controlHeidenhain line ...