подкатегории
(уровень третий категории)
Производитель:
(Категория: 103)
CNC Milling Machine - Heidenhain TNC 310 with handwheel - hydr. Tool Clamps - Central lubrication - Coolant system - Machine light - Machine feet - Enclosure x-travel 600 mm y-travel 400 mm z-travel 400 mm Table size 800 x 400 mm Spindle holder ISO Sk 40 Spindle speeds: 10 - 3150 rpm Quill stroke mm Total power requirement 12.0 kVA Machine weight approx. 2.2 t Dimensions L x W x H 2.0 x 1.85 x 1.95 m
X-axis: 600mm, Y-axis: 400mm, Z-axis: 400mm; Clamping table: 500x 320mm; Speed range:63-3150 rpm, Number of steps:16, Tool holder: SK40, equipped with digital display, Make: Heidenhain
Technical data Manufacturer: MAHLO Type: FU 1300 Machine number: 2257 Voltage: 220–380 V / 50 Hz Clamping surface: 1300 x 300 mm T-slots: 5 (spacing 60 mm) Travel (X/Y/Z): 950 / 275 / 500 mm Spindle holder: ISO 40 Speed range: 30–1200 rpm Weight: approx. 1750 kg Configuration Accessories: 1 HILMA machine vice, 1 RÖHM four-jaw chuck, diameter approx. 200 mm Application: General milling work in tool and mechanical engineering
Universal Milling Machine - Digital display - Chip protection - Coolant system - Machine light - Chip tray x-travel 560 mm y-travel 300 mm z-travel 420 mm Table size 1055 x 240 mm Spindle holder ISO Sk 40 Spindle speeds 40 - 1550 rpm Total power requirement 5.5 kW Machine weight approx. 1.3 t Dimensions L x W x H 1.6 x 1.5 x 1.85 m
MTCut V110 4 Axis Machining Center (2012) Manufacturer: MTCut Type: V110 Year of Make: 2012 Condition: used, very good, in production. Switch-on hours: 14150h Spindle hours: 3710h Control: Itnc 530 Travel range. X x Y x Z = 1100 x 640 x 610mm – 30-fold tool changer ISO 40 – 4th axle Lehmann, 200mm lining with hydr. Workpiece clamping and 350mm face plate. – Internal coolant supply 50bar – Spindle cooling – Measuring Buttons – Dimensions approx. L x W x H 3.2 x 3.2 x 3.1m (Transport height 2.5m). Incl. tools in the tool turret
Serial number: 36434Operating voltage: 380 - 415 VConnection: 1.5 kWSpeed: up to 1400 rpmRated current: 5.7 ASpeed: from 70 to 2590 rpmDrilling depth: up to 170 mmTable dimensions: 650 x 270 mmwith three groovesincl. three-axis digital display from the manufacturer HEIDENHAINalso an attached vice, jaw width: 85 mm and a matching dividing head
Table power supply X-Y axis: 8-400 mm/min. Table power supply Z axis : 4-200 mm/min. Eilgang X-Y shaft: 2400 mm/min. Electrical flux Z axis:1200 mm/min. Heidenhain readout with probe
Manufacturer: CMEYear: 1991Type: CNC universal milling machineNumerical control: Heidenhain TNC 124Axes: 3 axes (X, Y, Z)Strokes: X 1100 mm / Y 700 mm / Z 500 mmTable: 1400 x 450 mmSpindle: ISO / SK 40 – 40 to 1800 rpm – motor power 10.6 kWDimensions: 2400 x 2150 x 2100 mmWeight: approx. 3800 kgNotes: Robust Spanish-made universal CNC milling machine.
x-travel:600 mmy-travel:500 mmz-travel:450 mmturning speeds:5 - 5000 U/minquill stroke:90 mmtotal power requirement:9 kWfeed range:0-10.000 mm/minweight of the machine ca.:3260 kgdimensions of the machine ca.:2200x2800x2000 mmspindle:6 kWvertical milling head:SK 40 CNC universal milling machine without toolchanger,Equipped with CNC-Heidenhain TNC 407el.handwheelcoolant device
x-travel:850 mmy-travel:500 mmz-travel:610 mmrotary table::400 mmspindle turning speed range:12.000 1/mindrive capacity - spindle motor:17/10 kWcontrol:HEIDENHAIN iTNC 530 Tool changer:40- fach spindle taper ISO:SK 40 weight of the machine ca.:7,7 ttotal power requirement:28,5 kWdimensions of the machine ca.:3 x 2.70 x 3,2 m5-axis simultaneously universal-machining center,NC-rotary-swivelling table dia. 400mm,3D infrared touchprobe,el. handwheel,chipconveyor,airblast through spindle,internal coolant supply 40bar,flushgun,direct measuring system,approx. 38.000h "machine on", approx. 14.500h "spindle on"
AVIA FNE 40P – Universal milling machine built in 2014 Highlights • Year of construction 2014 • Model AVIA FNE 40P • 3-axis digital display ARBAH-M • Tool holder SK 40 • Rotatable milling head • Without vertical milling unit • Closed work area • Coolant system • Machine weight approx. 2000 kg Technical data • Travel distances: 3 axes (X, Y, Z) • Table dimensions: approx. 800 x 400 mm • Max. tool diameter: 125 mm • Max. tool weight: 6 kg • Machine dimensions: approx. 2300 x 2100 x 2100 mm • Machine weight: approx. 2000 kg Equipment • Protective cover with viewing window • Control panel • Machine lighting • Emergency stop switch
x-travel:600 mmy-travel:400 mmz-travel:400 mmnumber of spindle speeds:63 - 3.150 1/minfeed stepless:12-3000 / 6-1500 (Z) mm/minquill stroke:100 mmmilling-head swivable +/-:90° spindle taper ISO:SK 40 surface area:630 x 400 mmtotal power requirement:8 kWweight of the machine ca.:2,2 tdimensions of the machine ca.:2 x 1,9 x 1,95 muniversal milling machine with point to point control,mechanical handwheels,swivel - rotary table (mech.) +-45°,hydr. tool clamping,half cabin,coolant device,manuals (German language)
Equipment: - Digital display - Coolant system - Huron milling head - Emergency stop facility - Documentation x-travel 710 mm y-travel 250 mm z-travel 400 mm Table size 1200 x 300 mm Conventional control Mounting SK40 Speed range 50 - 2500 rpm Total power requirement 2.2 kW Machine weight approx. 1.7 t Dimensions L x W x H 2.1 x 2.0 x 1.6 m
Working width; 700mm; Lombardini Motor
Spindle rotates; Displacement works, but does not always transmit the power supply electronically.
GeneralUniversal Machining Centre with rotating viewing panel and Electronic handwheel; Control: 3D-Control Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical60000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical60/40/40 m/minWorking area 1Longitudinal2100 mmCross2100 mmVertical1250 mmMiscellaneousClamping SystemDIN 69872 Tool changerApplicationUniversal Type of magazineChain Type of gripperDouble gripper Universal milling head with controlled B-axisUniversal milling head with controlled B-axis SK 50 Continuously positioning universal milling head (B-axis) with integrated motor spindle for 5 axes positioning and simultaneous machining. - swivel angle: from horizontal position to max. 250° (70NC rotary tableType of Measuring system Direct measuring systemNumber of Slots 13Slot width 18 mmMaximum load (table centre) 8000 KgCentre bore 50H6 m ...
Milling machine with - Heidenhain TNC 135 - Rapid traverse - Milling head with hydr. Tool sparing - Coolant system - Central lubrication x-travel 1000 mm y-travel 450 mm z-travel 450 mm Table clamping area 1370 x 400 mm Number of T-slots 5 pcs. Spindle speeds: 32 - 1500 rpm Tool holder SK 50 Total power requirement 7.0 kW Machine weight approx. 3.1 t Dimensions L x W x H 2.1 x 1.7 x 1.9 m
The conception of the basic machine is characterized by the following features: - horizontal position of the workpiece spindle; vertical position of the milling cutter spindle or of the milling head - The workpiece is picked up between the workpiece headstock (left) and the tailstock (right) - The radial slide is mounted on the base (X-axis) - The axial slide moves on the radial slide (Z-axis) - The shift milling head is equipped with automatic angle adjustment (A-axis); the shift slide (Y-axis) moves tagential to the Workpiece diameter - CNC controlled - IBH control - Charging device - a lot of accessories Technical data: - Largest millable module with hobs according to DIN 8002: 4.5 mm - Largest millable module for high-performance milling: 3.0 mm - Number of teeth: 2 - 999 - Max. workpiece nozzle for manual loading: 200 mm - Max. workpiece nozzle for autom ...
x-travel:14000 mmy-travel:3100 mmz-travel:1.200 mm (220 - 1.420) mmdistance between columns:4.417 mmtable-size:14.000 x 2.500 mmworkpiece weight:15.000 kg/mdrive capacity - spindle motor:25 kWspindle cone:63 HSKspindle turning speed range:18000 rpmmilling feeds:30000 mm/mindimensions of the machine ca.:15.000 x 8.418 x 6.033 mmweight of the machine ca.:135 tCNC controller: SIEMENS 840 D universal milling head:5 Achsen mit ?C5C? Elektrospindel automatic tool changer:24 fach
x-travel:2000 mmy-travel:800 mmz-travel:800 mmtable-size:2.000 x 700 mmworkpiece weight:3500 kgdrive capacity - spindle motor:17 kWspindle cone:50 ISOspindle turning speed range:3000 U/mindimensions of the machine ca.:5265 x 3250 x 2730 mweight of the machine ca.:9 tCNC controller:HEIDENHAIN TNC-426 :manuell used universal bed type milling machine with chip conveyor, automatic 2 position (vertical/horizontal) head 3000Rpm The retrofitting jobs done in this machine, are the same than those done to all of our machines.- Completely repair of the head, replacing bearings, shafts and engaging gears.- Completely replacement of all the bearings of the machine.- Replacing the joining screws of the bodies.- Completely repair of spindles.- Adjustment and repair of axis.- Grinding and adjusting all guides, because of deterioration.- Grinding and adjusting of the guide ways of the ram.- Repairing o ...
Horizontal milling machine - Incl. partial table x-travel 780 mm y-travel 220 mm z-travel 410 mm Table length 1100 mm Table width 270 mm Spindle speeds 40 - 960 rpm Spindle holder SK 40 Total power requirement kW Machine weight approx. 1.7 t Space requirements approx. 1.8 x 1.6 x 1.8 m Condition: unchecked (6)
Equipment: - Heidenhain digital display - Feed and spindle infinitely variable - Coolant system - Chip protection - hydr. Vise - Good condition - SK40 Tool Holders and Accessories see pictures x-travel 850 mm y-travel 300 mm z-travel 450 mm Table size 1100 x 250 mm Conventional control Mounting SK40 Speed range 35.5 - 1800 rpm Quill stroke mm Total power requirement 5.0 kW Machine weight approx. 1.25 t Dimensions L x W x H 1.8 x 1.7 x 1.8m
x-travel:1000 mmy-travel:1150 mmz-travel:700 mmtable-size:900 mmtable load:1500 kgspindle speeds:10.000 1/minspindle drive:Motorspindel von Cytec CS34-180-A 34&42KW/160&200 Nmspindle taper:A100 HSKT-slots:18mm/7/100 mmmilling feed range:20.000 mm/minrapid traverse feeds:X/Y/Z: 24 m/mindiameter of tools max.:150 mmworkpiece length:300 mmweight of tools max.:20 kgweight of the machine ca.:15 tdimensions of the machine ca.:s. Katalog mCNC controller:Heidenhain iTNC-640 HSCI-Steuerung cnc rotary table:von Cytec; mit Ø900mm; 800 1/min Drehmomenttisch (AS3347) + HSK-T63/100 Spindel & ATC + TNC-640 Fräsdrehzahlregelung B-axis:Fräskopf, 0-180° c-axis:0,001° automatic tool changer:HSK-A/T100; 60 fachScales:in X/Y/Z von Heidenhain mit Druckluft inner coolant:20
Milling machine Mikron WF 21C Year of Make: 1996 Technical data X-axis: 400 mm Y-axis: 400 mm Z-axis: 400 mm Clamping table Vertical clamping surface: 300 x 450 mm Number of threaded holes: 2 x 6
Machine number: 370648Operating voltage: 400 VFrequency: 50 HzNominal current: 25 AConnection: 13 kVAControl: HEIDENHAINClamping surface: 800 x 425 mmClamping grooves: 6Groove width: 14 H7Groove spacing: 63 mmMax. table load: 250 kgTravel X-axis: 600 mm Travel Y-axis: 400 mmTravel Z-axis: 400 mmMax. distance from top of the table to horizontal Spindle center: 130 to 550 mmTop of the table to vertical head Bottom edge: max. 480 mmTool holder SK 40Speed 1: up to 1125 rpmSpeed 2: 1126 - 4500 rpmQuill stroke vertical: 60 mmVertical head swivel on both sides: 90° Feed longitudinal and transverse: 0 - 2000 mm/minRapid traverse longitudinal and transverse: 5000 mm/minFeed vertical: 0 - 2000 mm/minRapid traverse: 4000 mm/minReference: Hercegfi - Lot 7
Mori Seiki DuraVertikal 5080 3Axis Machining Center (11/2006) Manufacturer: Mori Seiki Type: auto_awesome Source language: English 587 Table length 1350 mm Table width 600 mm Number of T-profiles 6 T-profile width 18 mm Max. table load 1000 kg Longitudinal travel (x-axis) 1050 mm Transverse travel (y-axis) 530 mm Travel (z-axis) 510 mm Max. tool diameter 125 mm tool weight 8 kg Spindle nose bt 40 Distance spindle nose table 150 - 660 mm By 0 rpm Until 10,000 rpm Voltage 50 Hz 3x 400 volts Spindle performance 22 kW Total power requirement 58 kVA Machine weight approx. 8,030 kg Length 2,500 mm Width 2,350 mm Height 2,700 mm Give feedback Translation results available Year of manufacture: 11/2006 Condition: used, good, in production I
GeneralUniversal Machining Centre; Control: 3D-Control Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal1600 mmCross1600 mmVertical1100 mmTool changerApplicationHorizontal Type of magazineWheel Type of gripperDouble gripper Number of tools60 MiscellaneousClamping SystemDIN 69872 NC rotary tableType of Measuring system Direct measuring system4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 15 rpmDistance between T-Slots 125 mmNumber of Slots 9Slot width 18 mmMaximum load (table centre) 4500 KgCentre bore 50H6 mmTable surface Ø 1600 x 1250 mmChip removal2 worm conveyors in the machine bed convey into a chip conveyor (scraper type conveyor), with interval control, placed at right angles. discharge height: 950 mm / 37.4 in width: ...
1.200 € 
