Manufacturer:
(Category: 101)
Key data: 730 mm, 730 mm, 740 mm
Mazak HC Nexus 5000-ll CNC Horizontal Machining Center CNC Control Mazatrol Matrix Pallet table size 500 x 500 mm Number of pallets 2 Table load 700 KG Travel X-Y-Z axes 730x 730x740 mm Table Indexing 0.001° Spindle taper DIN 69871A-40 Spindle speed 18,000 1/min Spindle motor 35-26 kW Mazgazin capacity 80 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.
Key data: 1050 mm, 510 mm, 560 mm
Mazak MTV 515/40N CNC Vertical Machining Center CNC Control: Mazatrol 640M Table size: 1300 x 550 mm Table load: 1500 kg X-axis travel range: 1050 mm Y-axis travel range: 510 mm Z-axis travel range: 560 mm Spindle taper: MAS BT 50 Spindle speed: 25 - 6000 1/min. Magazine capacity: 30 positions Machine weight: 8900 kg If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
The machine is visible in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several motion axles and one automatic tool exchange system and sometimes multiple pallets
Drilling capacity steel/GG: approx. 25 mm Spindle mount: 2 MK Projection: 300 mm Table size: 305 x 380 mm Quill stroke: 115 mm Spindle speeds: 200 - 1200 rpm Drive motor: 380 V, 1/1.5 kW Space requirement: 800 x 400 x 1800 mm Weight: approx. 280 kg
Inv. Num. : 8208 Type: W 200 Producer: ŠKODA Created: 1973 Parameters: Maximum spindle speed: 3000 1/min X-axis travel: 4000 mm Y-axis travel: 3150 mm Travel distances Z-axis: 2000 mm W-axis travel: 1600 mm Spindle diameter: 200 mm
Inv. Num. : 8206 Type: WHN 13.4B Producer: TOS Created: 1986 Parameters: Control system: Mefi CNC 859 Work table length: 1600 mm Work table width: 1600 mm Maximum spindle speed: 800 1/min X-axis travel: 2000 mm Y-axis travel: 2000 mm W-axis travel: 1250 mm Spindle diameter: 130 mm Machine weight: 32000 kg 2024: Complete replacement of lubricating oil dispensers Spindle bearing repair (new bearings) Replacing the engine with an overhauled engine
bore capacity in steel (diameter): 40 mmthroat: mmbore stroke: mmtotal power requirement: 4 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bohrleistung in Stahl (-Ø: 35 mmthroat: 1000 mmworkpiece height max.: 200 - 1400 mmheight adjustment: 745 mmbase plate surface area: 1200 x 930 mmBohrspindel-Ø/ Aufnahme: 90 mm / MK 4 bore spindle stroke: 350 mmturning speed range: 60 - 1850 U/minfeed range: 0,09 - 1 mm/Upower capacity: 3,7 kWweight of the machine ca.: 3,7 tdimensions of the machine ca.: 2,1 x 0,9 x 3,3 mCube table 800 x 800 x 650 mmCoolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 70 mmthroat: 420 mmbore stroke: 260 mmthread capacity: 50 Mspindle taper MT: 5 MKcolumn diameter: 220 mmbore spindle turning speed range: 51-966 U/mintable-size: 600x600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 35 mmthroat: 300 mmbore stroke: 150 mmthread capacity: 27 Mspindle taper MT: 4 MKcolumn diameter: 125 mmbore spindle turning speed range: 100-2000 U/mintable-size: 480x480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 35 mmthroat: 300 mmbore stroke: 150 mmthread capacity: 27 Mspindle taper MT: 4 MKcolumn diameter: 125 mmbore spindle turning speed range: 132-1852 U/mintable-size: 420x400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mmthroat: 300 mmbore stroke: 160 mmthread capacity: 30 Mspindle taper MT: 4 MKcolumn diameter: 125 mmbore spindle turning speed range: 75-2100 U/mintable-size: 480x480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 50 mm: 1275 mm: 1330 -: MK 5 bore depth: 270 mmspindle turning speed range: 44-1206 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 23 mmthroat: 310 mmbore stroke: 150 mmturning speeds: 90 - 2000 U/min: 420 x 360 mmtotal power requirement: kW / Voltweight of the machine ca.: 650 Kgdimensions: 1,2 x 0,8 x 2,4 mmBench drill- Left/right rotation- Advance- Base frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 50 mmthroat: 385 mmbore stroke: 240 mmtable surface area: ø 500 mmspindle taper MT: 5 spindle turning speed range: 40 - 800 U/minfeeds: 0,1/0,14/0,2/0,28/0,4 mm/Ucolumn diameter: 220 mmdistance between table/spindle: max. 670 mmdistance spindle/base plate: 1180 mmtotal power requirement: 4 kWweight of the machine ca.: 1,4 tdimensions of machine L x W x H: 1,5 x 0,75 x 2,4 mAccessories: drill chuck, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1100 mmy-travel: 600 mmz-travel: 500 mmtable surface area: 1300 x 600 mmspindle taper: SK 40 spindle turning speed - stepless: 10.000 U/minATC: 40 Poscontrol: HEIDENHAIN, TNC 530 total power requirement: kWweight of the machine ca.: 8,8 tdimensions of machine L x W x H: 2,58 x 3,04 x 2,35 mAccessories: 2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm, various tool holders, chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1500 mmy-travel: 800 mmz-travel: 700 mmtable surface area: 1760 x 700 mmspindle taper: SK 40 spindle turning speed - stepless: 8000 U/minspindle drive: 15 kWfeeds: 1 - 8000 mm/minrapid traverse X/Y/Z axis: 15 / 15 / 12 m/mintable load: max. 2500 kgspindle throat: 760 mmATC: 40 Poscontrol: HEIDENHAIN, TNC 530 total power requirement: kWweight of the machine ca.: 12,5 tdimensions of machine L x W x H: 4,23 x 2,98 x 2,74 m- with coolant through spindleAccessories: NC-dividing unit (=4th Axis) with tailstock, center height 250 mm, 2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm, various tool holders, chip conveyor, coolant- geometrical overhauled in 2022 -- new ball bearing spindle installed on Y-axis in NOV. 2022 -- the magnetic plates shown on the photo are not included -The data for this ad was created with ModulMWS - the software solution o ...
x-travel: 710 mmy-travel: 630 mmz-travel: 500 mmtable surface area: 1100 x 585 mmrotary table dia.: 500 mmspindle taper: SK 40 spindle turning speed range: 5 - 6300 U/minspindle power: 11 kWno. of tools in magazin: 2 x 22 control: HEIDENHAIN, TNC 426 total power requirement: 20 kWweight of the machine ca.: 5,8 tAccessories: various tool holders, probe RENISHAW OMP 60, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 50 mmarm length: 1100 mmworkpiece height max.: ca. 1000 mmbore capacity in cast iron: 60 mmspindle taper: MK 5 spindle turning speed range: 28 - 2500 U/minfeeds: 0,05 - 2 mm/Uquill stroke: 300 mmdistance basic plate - spindle nose: 630 - 1380 mmcrossrail adjustment vertical: 750 mmtotal power requirement: 6 kWweight of the machine ca.: 4 tdimensions of machine L x W x H: 2,74 x 1,14 x 2,59 mm- with thread cutting attachment -Accessories: box table 550 x 550 x 550 mm, vice, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 2.600 mmy-travel: 700 mmz-travel: 700 mmControl: SIEMENS SINUMERIC 840D table-size: 2.900x700 mmtable weight: 2.150 Kgtool adaptor: SK 40 DIN 69872 workpiece length - max.: 300 mmworkpiece weight: 6 kgworkpiece dia.: 80/130 mm: 30 fachmain drive: 18,4/14 kWspeed: 14.000 mm/minrapid traverse: 40 m/minfeed: 40 m/minMachine on: 18.859 hSpindle hours: 5.666 hinternal coolant system feed: 40 Bar/600 l Chip coveyor: inkl. total power requirement: 55 kWweight of the machine ca.: 14.520 kgdimensions of the machine ca.: 10.280 x 7.230 x 3.042 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The Röders RFM 1000/2 is a high-precision vertical machining center designed for intricate milling tasks. Below are its key technical specifications: Travel Distances: X-Axis: 1,000 mm Y-Axis: 800 mm Z-Axis: 600 mm Table Specifications: Dimensions: 1,200 mm x 1,000 mm Maximum Load Capacity: 2,000 kg Spindle Details: Speed Range: 100 to 36,000 rpm Power: 17 kW Sortware update :2019 Find more here - .ucymachines/ Contact us at - sales@ucymachines
Horizontal machining center, 6 pallets, Priced to sell - dismantled and loaded into truck, OKUMA MA40 HA 6P OSP U100M CNC 6 pallets 400mm x 400mm max 400 kgs max workpiece dimensions 600710 Spindle BT40 / coolant through the spindle, 4th axis 1° Tool changer: 100 pos., 200 TOOLHOLDERS ARE AVAILABLE, X = 560mm, Y = 610mm, Z = 560mm 40 m/min under power Mimu Machine Tools (Italy), X: 560, pallet: 6, Pallet size: 400400
spindle turning speed - stepless: 26 - 1650 U/minvoltage: 380 V0: 50 Hzrated current: 15 Aconnected load: 6,5 kWtool taper: MK 4 weight of the machine ca.: 2,3 tdimensions of the machine ca.: 1500 x 1200 x 2500 mmOperating voltage: 380 VFrequency: 50 HzControl voltage: 220 VRated current: 15 AConnection: 6.5 kWAutomatic feed: 0.05 - 0.45 mm/revColumn lifting speed: 40 mm/sColumn stroke: 450 mmDrilling spindle stroke: 200 mmDrilling zone: 430 - 1150 mmHeight adjustment of the drilling spindle: 330 - 780 mmTool holder: MK 4Table dimensions: 1525 x 560 mmTable height: 800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
HAAS VF-0 Vertical Machining Center YOM 1998 Table 660x356 mm X/Y/Z 508/406/508 mm Spindle speed 0-7500rpm Spindle motor 14.9kW Rapid feed rate 18m/min Tool Capacity 20 Max. part weight 340.3 kg Spindle taper BT40 Machine Weight 3175Kg Remark: The machine had worked small parts in the production of hunting and sporting rifles. Mechanically OK, Defective a cirquit board
Control Heidenhain ... TNC 530 Clamping table surface... 600mm Axis X ... 800mm Axis Y ... 700mm Axis Z ... 610mm Spindle speed ... 20-15000 rpm controlled axes ... 5 cooling ... 20bar ISO 40 Max. workpiece weight ... 300kg Main engine power ... 25kW Rapid traverse ... 32,32,16m/min Number of positions in the tool changer... 30 Machine weight ... 8750kg L x W x H ... 3710x2530x3230mm
heavy 40s Gillardon with cross table
Drilling capacity steel/GG: 15 mm Spindle holder: 1 MK Projection: 300 mm Table size: 210 x 300 mm Quill stroke: 110 mm Spindle speeds: 200 - 3000 rpm Drive motor: 380 V, 1.1 kW Space requirement: 850 x 420 x 1860 mm Weight: 220 kg
Vertical machining center, CHIRON FZ08KW, 2 pallet, 15000 RPM, Tools: 24, HSK-A40, CNC Fanuc 21iM, The machine is visible in our warehouse in Gussago BS. M i m u Machine Tools Gussago BS Italy The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several motion axles and one automatic tool exchange system and sometimes multiple pallets
STAMA MC325 / S 2-palllet Double fourth axes Spindle 9000 rpm / 36 tools priced to sell low price - good deal The machine is visible in our warehouse in Gussago BS., Mimu Machine Tools, Gussago BS Italy, The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations, with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several motion axles and one, automatic tool exchange system and sometimes multiple pallets, CNC type: Siemens, Fourth axis: 2 + 2, Number of pallets: 2, Spindle speed RPM: 9000
Key data: 50 mm, 800 1/min
Speeds infinitely variable from 40 - 800 rpm 4 drill feeds . Clearly good original condition
