Manufacturer:
(Category: 101)
bore capacity in steel (diameter): 60 mmthroat: 400 mmbore stroke: mmtotal power requirement: 4,4 kWweight of the machine ca.: 1,7 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 16 mmthroat: 180 mmbore stroke: 85 mmspindle taper: MK 2 spindle diameter: 47 mmspindle turning speed range: 320 - 3300 U/min: 230 mm: 100 mmtable surface area: 420 x 155 mmconnected load frequency: 230 V: 900 x 600 x 300 cmtotal power requirement: 0,75 kWweight of the machine ca.: 8o Kgdimensions: 0,7 x 0,7 x 0,8 mDrilling and milling machine- Cross Support- Cabinet- Swivel spindle head left / right 90 °- Feed via hand crankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mmarm length: 1000 mmworkpiece height max.: 1400 mmtotal power requirement: 6 kWweight of the machine ca.: 3.700 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mmthroat: 290 mmbore stroke: 115 mmspindle taper: SK 40 spindle turning speed range: 70 - 3200 U/min: 350 mm: 130 mmtable surface area: 590 x 190 mmconnected load frequency: 400 Vdiameter of hob: max. 80 mmfeed: 0,1 - 0,18 - 0,26 mm/Utotal power requirement: 1,1 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 0,7 x 0,95 x 1,75 mDrilling and milling machine- Cross Support- Cabinet- Swivel spindle head left / right 90 °- Feed via hand crankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread dia.: M3 - M12 metrisch: 400 U/min.0: 6 - 8 barworking area: max. 1100 mmweight: 15 kgdimensions: 700 x 280 x 200 mmPneumatic tapping machineType with an adjustable angle, horizontal tapping possiblePneumatic tapping machines for M3 - M12 threads, angle adjustable.8 pcs. quick-change chuck with slipping clutch.Documentation in English!Optional: clamping table with grooves type: FL-WBThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of spindles: 4 bore capacity in steel (diameter): 23 mmbore stroke: 150 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 750 mmy-travel: 560 mmz-travel: 600 mmControl: HEIDENHAIN iTNC 530 total power requirement: 70 kWweight of the machine ca.: 11.000 kgdimensions of the machine ca.: mD E C K E L M A H O (Germany)Vertical CNC Machining Centre with high speed linear drives in 3 Axis and in double column design for high precision workModel DMC 75 V LINEAR Year 2005_______________________________________________________ Working range: Longitudinal stroke X Axis 750 mm Vertical stroke Z Axis 600 mm Cross stroke Y Axis 560 mmTable clamping size 950 x 650 mmMax. Table load 1.000 kgMax. height of workpiece 60 ...
thread dia.: M3 - M16 mm: max. 187 U/min.working area: 180 - 1000 mmengine output: 0,7 kWweight: 22 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mmy-travel: 560 mmz-travel: 560 mmControl: SIEMENS 840 C total power requirement: 12 kWweight of the machine ca.: 10000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread dia.: M3 - M16 metrisch: 312 U/min.working area: max. 1100 mmengine output: 0,6 kWweight: 30 kgdimensions: 700 x 600 x 200 mmElectric tapping machines for M3 - M16 threads,Angle adjustable.Quick-change chuck with slip clutch.Adjustable via display:variable speed, adjustable depth, material selection, choice ofMain direction of rotation, thread selection.Documentation in English!Options:Clamping table with grooves Type: FL-WBThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 500 mmy-travel: 380 mmz-travel: 300 mmControl: FANUC total power requirement: 12 kWweight of the machine ca.: 2300 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1000 mmy-travel: 800 mmz-travel: 700 mmControl: HEIDENHAIN iTNC 530 total power requirement: 50 kWweight of the machine ca.: 16 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mmthroat: 320 mmbore stroke: 160 mmspindle taper MT: 4 MKtable:: 500 x 420 mmcolumn diameter: 120 mmturning speeds: 85 - 1800 U/minfeeds: 0,1 - 0,2 - 0,3 mm/Utotal power requirement: 0,85 / 1,5 kWweight of the machine ca.: 500 kg.range L-W-H: 965 x 515 x 1920 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 630 mmy-travel: 550 mmz-travel: 500 mmtotal power requirement: 10 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 mmthroat: 290 mmbore stroke: 130 mmspindle taper: SK 40 spindle turning speed range: 75 - 3200 U/min: 500 mm: 230 mmtable surface area: 720 x 210 mmconnected load frequency: 400 Vdiameter of hob: max. 80 mmtotal power requirement: 1,1 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 1,1 x 0,9 x 1,2 mdomestic equipments• Digital display• Digital depth gauge for quill• Adjustable guides with wedges• Large 12-speed range from 75 to 3200 rpm• Smooth running due to hardened and ground gears running in an oil bath •• Right-left rotation• Prismatic guides in all axes• Gear head can be swiveled 90 °• Chip protection with safety circuitMachine base optional.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel: 30 mmthreading cutting capacity:: M20 throat: 260 mmbore stroke: 125 mmspindle taper: MK 3 feed range - spindle: 0 mm/Uspindle turning speed range: 80 - 1440 / 180 -3200 U/mintransmission ratio: 2 Stufencolumn diameter: 110 mmtable surface area: 500 x 365 mmtotal power requirement: 0,8 / 1,4 kWweight of the machine ca.: 0,27 tdimensions of the machine ca.: 0,4 x 1,2 x 1,9 mEquipment:- Gears made of hardened and ground steel- Front speed selector lever- Gear lubrication by automatic oil pump- Integrated coolant device- Machine lamp- Rotatable and tiltable table- Automatic feed with electromagnetic clutch- Handwheel for manual fine feed- automatic tool ejector- Integrated electrical controls in the drill head- Pushbutton for EMERGENCY STOP- Switch for right / left rotation- Height-adjustable chip protection hood with microswitch- CE markThe data for this ad was crea ...
bore capacity in steel (diameter): 10 mmthroat: 0 mmbore stroke: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
honing diameter: 110 mmstroke: 150 mmthroat: mmtotal power requirement: 2,5 kWweight of the machine ca.: 500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
core drilling diameter max.: 25 mmbore depth: 1000 mmswing diameter: mmtotal power requirement: 25 kWweight of the machine ca.: 12,5 tdimensions of the machine ca.: mT B T (Germany)CNC-Controlled Horizontal Deep Hole Drilling Centre Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 ______________________________________________________________________ _____________Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mmTable clamping area 1,200 x 2,000 mmDrilling capacity in solid material, approx. 4 - 25 mmTool holder taper HSK 50Spindle speeds 1.260 - 15,000 rpmFeed rates / quickfe ...
x-travel: 500 mmy-travel: 300 mmz-travel: 350 mmtotal power requirement: 12 kWweight of the machine ca.: 3800 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 800 mmy-travel: 500 mmz-travel: 510 mmtotal power requirement: 60 kWweight of the machine ca.: 10 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Year of manufacture: 1992 / G: 2025 Spindle diameter ... 100mm Axis X ... 1500mm Axis Y ... 1250mm Spindle speed ... 7-1120 rpm Axis W Axis Z ... 1800mm ISO 50 Turntable diameter ... 1200x1200mm The machine is in good condition, possible to test under power.
Control Heidenhain ... TNC 530 Clamping table surface ... 600x1000mm Axis X ... 630mm Axis Y ... 560mm Axis Z ... 560mm Spindle speed ... 0-12000 rpm controlled axes ... 5 cooling HSK 63 Table diameter ... 600mm Magazine spaces ... 24 Main engine power ... 15/10kW Max. workpiece weight ... 500kg The machine is in good condition, possible to test under power.
Offer 25094 Specifications: - Drilling capacity in steel ST 60 50 mm - Drilling capacity in steel ST 60 60 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 225 mm - Drilling spindle speeds infinitely adjustable 35 – 950 rpm - Right - Counterclockwise rotation - 3 feeds 0.1; 0,16; 0.25 mm/rev - Projection 360 mm - Max. distance from drill spindle to table / base plate 740 / 1220 mm - Table with 2 T-slots 700 x 590 mm Height adjustable via rack with hand crank - Drive 400 V / 2.2 / 4.0 kW - Space requirement approx. W 700 x H 2150 x D 1150 mm - Weight approx. 850 kg - with: - Emergency stop button -Lighting - Coolant device
spindle diameter: 125 mmx-travel: 1.500 mmy-travel: 1.250 mmz-travel: 1.000 mmw-travel: 550 mmtable surface area: 1.000 x 1.250 mmworkpiece weight: 6.000 kgquill stroke: 550 mmtool taper: ISO 50 number of spindle speeds: 5-3.700 U/min.max. torque: 2012 Nmfeed speeds: 1-6000 (x-Achse) mm/minfeed speeds: 1-6000 (y-Achse) mm/minfeed speeds: 1-6000 (z-Achse) mm/minrapid traverse x/y/z: 15/ 15/ 15 m/mindimensions of the machine ca.: 7,51 x 5,07 x 3,33 m: 63 kVAEquipment/ Accessories:- CNC control Siemens 840 D - 60 ATC- Coolant system with high-pressure pump 30 l/min.- 20 bar- documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Radial drill, Csepel RFM 51, used machine Manufacturer: Csepel Model: RFM 51 X-axis length: 4000 mm Arm travel: 3100 mm Radius: 2460 mm Distance from base to spindle: 1660 mm Drilling capacity in steel: 100 mm Drilling capacity in cast iron: 120 mm
Specifications: Manufacturer: 3M ESPE Type: Lava CNC 500 Control: Beckhoff Year of Make: 2008 Compressed air: 6.5 bar Rated power: 1 kW Rated mains frequency: 50/60 Hz Weight Weight: 620 kg Condition Condition: Used Functional: Tested and fully functional
Inv. Num. : 8330 Type: HR 8A Producer: MITSUI-SEIKI Generated: Parameters: Control system: FANUC Work table length: 1295 mm Work table width: 1295 mm Maximum table load (uniform): 3992 kg X-axis travel: 1800 mm Y-axis travel: 1500 mm Travel distances Z-axis: 1200 mm Machine height: 5500 mm Machine length: 12000 mm Machine width: 9200 mm Machine weight: 45000 kg
CNC controller: HEIDENHAIN TNC 430 Axes X-axis travel mm: 600 Y-axis travel mm: 450 Z-axis travel mm: 500 Distance spindle nose - table surface mm: 573 Rapid traverse m/min: 10 Worktable Number of pallets: 1 Table dimensions mm: 800 x 465 Maximum workpiece size (D x H) mm: 900 x 528 Max. workpiece weight kg: 450 (500 in large workpieces) T-Slot version: 14 H7 Spindle Spindle speed rpm: 6.300 Spindle drive power kW: 8,6 Bearing Inner Diameter mm.: 70 Tool system Tool holder: SK 40 Tool magazine slots: 34 Max. Tool Diameter: 90 With free neighboring places mm: 125 Tool Magazine: UTC 34 Max. Tool Length mm: 250 Max tool weight kg: 8 Equipment Electronic Handwheel Rinsing gun Tool breakage probe Workarea light CE conformity Cooling Tank capacity: 170 L High-pressure bar: 40L / min Machine running times Rated power kVA: 16 ...
