Manufacturer:
(Category: 101)
Max. drilling diameter ... 63mm Spindle holder ... Morse code 6. Machine weight ... 7100kg Max. vertical arm adjustment ... 950mm Spindle speed ... 11-2000 rpm Main engine power ... 5.5kW Total power requirement ... 8.5kVA The machine is in good condition, possible to test under power.
Key data: 1000 mm, 510 mm, 450 mm
CNC control SEICOS (Sigma) 18M, speed range 120-12000 rpm, 22 / 18.5 KW Tool holder SK 40, tool magazine with 30 places, IKZ mt 15 bar, HSC machine package for precise milling at high feed speed Dimensions: Width x depth x height 2900 x 2400 x 2786 mm, weight approx. 8200 kg Please note: The machine is not usable, tool clamping of the SK 40 mount is defective. Tool changer can therefore not change.
Key data: 800 mm, 800 mm, 800 mm
3D path control Heidenhain iTNC 530, main drive 19 KW (100% ED), 28 KW (40% ED), Tool holder SK 40, chain magazine with 60 places, chip conveyor, rotating viewing disc, Coolant tank with 600 liters, IKZ with 40 bar, switchable to blowing air, universal milling head B-axis, NC rotary table 900mm x 700 mm, infrared touch probe Heidenhain TS 641, electronic handwheel, Operating mode 4, documentation with repair work available. Spindle hours Total 13,700 of which 680 hours on new spindle replaced 27.02.2024
x-travel: 650 mmy-travel: 500 mmz-travel: 500 mmcontrol: Siemens 840 D table surface area: 800 x 500 mmrapid traverse: 60 m/mintable load: 1,5 tturning speed range: 0 - 18.000 U/minmax. torque on the spindle: 130 Nmpower capacity - milling spindle: 15 kWno. of tools in the magazine: 30 Stücktool taper: HSK 63 A |internal coolant system feed: 40 barweight of the machine ca.: 10,5 tdimensions: 4,10 x 3,90 x 2,90 mHSC- vertical machining with 4th axisEquipment: - coolant system - 3,5 floppy disk - 4th axis - new spindle in 2019The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 650 mmy-travel: 500 mmz-travel: 500 mmcontrol: Siemens 840 D table surface area: 800 x 500 mmrapid traverse: 60 m/mintable load: 1,5 tturning speed range: 0 - 18.000 U/minmax. torque on the spindle: 130 Nmpower capacity - milling spindle: 15 kWno. of tools in the magazine: 30 Stücktool taper: HSK 63 A |weight of the machine ca.: 11 tdimensions: 4,10 x 3,90 x 2,90 mHSC- vertical machining with 4th axisEquipment: - coolant system - Lasersystem for tool measure - 3,5 floppy disk - 4th axis - new spindle in 2016The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Drilling capacity (steel): 50mm, spindle speed: 1700rpm, reach: 45mm-1500mm, workpiece height range: 470mm-1500mm, sleeve stroke: 680mm, quill stroke: 350mm, spindle taper: MK5, max. tool weight: approx. 30kg. Machine dimensions X/Y/Z: approx. 2600mm/1100mm/3500mm, weight: approx. 4000kg. An on-site inspection is possible.
Travel X/Y/Z: 450mm/580mm/400mm, swivel range A/B: -110°/+10°, rotation range C: 360°, table dimensions X/Y: 400mm/400mm, tool positions: 30, tool holder: HSK-E50, spindle speed: 42000rpm, max. workpiece weight: 200kg, feed: 80m/min, max. tool length/diameter: 250mm/80mm. Machine dimensions X/Y/Z: approx. 3250mm/2950mm/2900mm, weight: approx. 9500kg, control: Heidenhain iTNC530. Documentation available. An on-site inspection is possible. The machine is located in China.
Travel X/Y/Z: 3000mm/2300mm/1600mm, travel W: 700mm, max. table-to-spindle distance: 2300mm, table dimensions X/Y: 1800mm/2200mm, max. table load: 10000kg, spindle diameter: 130mm, spindle speed: 2500rpm, rapid traverse X/Y/Z: 10m/min, rapid traverse W/B: 5000mm/min/500mm/min, feed X/Y/Z: 4m/min, tool holder: BT50, tool positions: 38, positioning accuracy X/Y/Z: +/-0.008mm, positioning accuracy W: +/-0.012mm, repeatability X/Y/Z: +/-0.004mm, repeatability W: +/-0.008mm. Machine dimensions X/Y/Z: approx. 7050mm/7200mm/4800mm, weight: approx. 37000kg, control: TOSNUC-888. Documentation available. An on-site inspection is possible. The machine is located in China.
A Mazak CNC vertical machining center is available. Travel X/Y/Z: 1660mm/760mm/660mm, spindle power: 11kW, spindle speed: 7000rpm, table dimensions X/Y: 2000mm/760mm, max. workpiece weight: 800kg, rapid traverse X/Y/Z: 24m/min/24m/min/20m/min, feed: 5m/min, tool positions: 24. Machine dimensions X/Y/Z: approx. 4350mm/3400mm/2850mm, weight: approx. 8700kg. Documentation available. An on-site inspection is possible.
MÜGA high-speed drilling-milling centre TYPE: S 3030 with 2-fold pallet changer incl. chip conveyor (similar to FANUC or BROTHER) Control: MITSUBISHI M70 Travel: X/Y/Z: 300 x 250 x 250 mm Spindle speed: 60 – 10,000 rpm. Motor power: 100//30% ED 2.2/3.7 kW Star turret: 12-speed Tool change time: 1.6 sec. Chip-to-chip time: 2.5 sec. Tool holder: BT 30 - 45° 2-fold pallet table: LxW: 400 x 250 mm Chip conveyor ejecting backwards Rapid traverse: X/Y/Z: 48/48/60 m/min. Installation area: L x W x H: 2690 x 1570 x 2370 mm Weight: 3300 kg Total connected load: 11.5 kW Description: The machine is suitable due to the 2-fold pallet system, as well as the high rapid traverses and fast chip-to-chip time for series part production. From 2011 to 2020, it was used in single-shift operation exclusively for ALU machining. There is no hour meter. The machine is still un ...
Witzig & Frank high-speed radial drilling machine LEO 32 AS Defects: (clamping no longer works, running noises present)
Radial drilling machine BR 56 x 1600 Year of construction: approx. 1965 (estimate) equipped with coolant device and drilling table as optional accessories
Machining center TOS Kurim MCFHD 80 CNC, control system Mefi
Specifications - Clamping surface (left-right): 390 mm - Clamping surface (front-rear): 420 mm - Control: electronic control - Quill stroke: 120 mm - Speed range up to: 7500 rpm - Tool holder: MK 3 - Connected voltage: 400 V - Mains frequency: 50 Hz - Total height approx.: 1.90 m -Documentation - Weight approx.: 400 kg
Specifications - Clamping surface (left-right): 370 mm - Clamping surface (front-rear): 614 mm - Control: electronic control - Quill stroke: 180 mm - Speed range up to: 55 - 5000 rpm - Projection: 320 mm - Tool holder: MK 4 - Connected voltage: 400 V - Total height approx.: 2.06 m -Documentation - Weight approx.: 600 kg
A high-precision CNC drilling/reference hole machine Mach3 Lab with X-ray vision system is available. Travel X/Y: 700mm/800mm, max. panel dimensions X/Y: 700mm/700mm, min. panel dimensions X/Y: 300mm/200mm, panel thickness range: 0.3mm-6mm, Z-axis stroke: 40mm, spindle speed: 30000rpm, positioning accuracy: +/-0.003mm, transducer resolution: +/-0.001mm, X-ray range X/Y: 700mm/580mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible.
Manufacturer: LINEMATIC Model: LM34/705 Year of Manufacture: 2004 Power: 14 kW Voltage: 400 V, 20 A, 50 Hz Phase: 3-phase + Neutral + Protective Earth CE certified Find more here - .ucymachines/ Contact us at - sales@ucymachines
Bohrleistung in Stahl (-Ø: 45 mmthroat: 1250 mmworkpiece height max.: 1100 mmswival range +/-: 360 °height adjustment: 745 mmbase plate surface area: 1450 x 920 mmBohrspindel-Ø/ Aufnahme: 90 mm / MK 5 bore spindle stroke: 355 mmmax. torque on the spindle: 250 Nmfeed power: 14000 Nturning speed range: 20 - 1200 U/minfeed range: 0,063 - 0,63 mm/Udrilling capacity steel/cast iron: mmpower capacity: 3,7 kWweight of the machine ca.: 3,0 tdimensions of the machine ca.: 2,1 x 0,9 x 3,3 m• cube table 650 x 650 x 500 mm,• coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
AGEMA high-speed drilling machine AS 210 The machine is assembled and functional in the showroom. • Well-maintained machine. • Built in 2007 • Tank has been cleaned • Electrode diameter: 0.15 up to 3 mm • Maximum drilling depth: 100mm • Max workpiece weight: 20kg • X, Y, Z travels: 200 x 100 x 140 mm
CNC machining center brand AWEA 1460 BM Year of Make: 2014 Power-on hours: 16656 Spindle Hours: 7073 Single-shift operation/KD-maintained X=1460mm Y= 600mm Z=620mm 40x Random Changer 30 KW spindle power Control: Heidenhain 530 Handwheel: Heidenhain Heidenhain Measuring Rulers Sealing air on measuring rulers IKZ= 30 bar Exterior cooling Cabin flushing Spindle: 10,000U/pm Large coolant tank and filter Large side doors Machine can be viewed on site by arrangement under Chip!
Demonstration machines as good as new: Standard - Ball-bearing wear-free parallel arm, radius: 1270 mm or 1800 mm - Connection 230 V / 1Ph - Speed infinitely adjustable - Digital speed display and digital depth control, duty cycle of your choice • Manual: Direction of rotation right/left by means of press studs • Automatic: at the set depth, the direction of rotation is automatically reversed • Memory for 5 depth programs/edits, incl. piece counter (see page 2) - Lubrication system for tapping (only with 2 articulated arms(1800)) - Quick-change mount for Bilz thread holders, among others - M models are designed with a multi-position head All D+ models are equipped with digital depth control - Digital speed display - Manual work cycle: Direction of rotation right/left by means of push buttons - Automatic work cycle: • Digital input of slope and depth, at the s ...
Demonstration machine as good as new! hydraulic tapping machine with parallel arm Model: RHR24 (M3-M24) Standard - Ball bearing wear-free parallel arm, radius: 1800mm - Hydraulic system 400 V / 3Ph (mounted in the lower box) - Digital speed display and digital depth control, duty cycle of your choice - Manual: Direction of rotation right/left by means of press studs - Automatic: digital input of depth, at the set depth the direction of rotation is automatically reversed - Wide speed range, working and return speed Separately electronically adjustable (by means of frequency converter) - Clamping table 800 x 600 mm with T-slots - Micro spray system for tool lubrication (integrated in the machine head) - Lower box - Quick-change mount for Bilz thread holders, among others
drilling diameter: 18 mindrilling capacity diameter max.: 15 mmbore depth: 90 mmthroat: 215 mmspindle: bis 360 mmspindle: 560 mmtable plate: 350 x 290 mmcolumn diameter: 75 mmTotal height: max. 1050 mmweight: ca. 100 kgspindle turning speed - stepless: 100 - 1800 U/minmotor speeds:: 700 / 1400 U/minPole-changing motorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
throat: 180 mmquill stroke: 80 mmcontinious capacity: 20 spindle taper: MK 2 table-size: 280 x 245 mmheight of the machine: ca. 1000 mcolumn diameter: 73 mmdistance spindle /table: max. 425 mmdimensions: ca. 615 x 330 x 1015 mmweight: ca. 60 kgincl. vice HM Müller HT100PThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 2000 (775 + 600) mmy-travel: 620 mmz-travel: 520 mmControl: Heidenhain iTNC 530 turning speed range - main spindle: 12.000 min/-1power capacity - main spindel: 18 kWtable surface area: 1.200 x 600 mmrotary table diameter: Ø 500 mmswivellable: +15/-95 °rotatable: 0- 360 °max. table load: 1000/350 kgtool taper: SK 40 number of toolpositions: 30 pos.internal coolant system feed: 20 barrapid traverse ( X / Y / Z ): 30 m/mindimensions: 5,0x 2,5 x 3,3 mweight of the machine ca.: 11 tCNC-Machiningcenter Universal, 5-Axis and fixed tableMachine overhold for 60.000 €- NC-Swivel-Rotary-Table integrated right working area- Fixed-Table left working area- 4th axis on fixed table 165 centre hight- Chip conveyor- internal coolant- filter- 3D probe- Oil dust collector- 2022/2023 overhold for 60.000 € new slideways aspindles in all axis- electric roof- new spindle in 2016 at 20.800 Spin ...
CNC Table Type Horizontal Boring Mill Doosan DBC 130II. S/No. MB0003-000435 New in 2013 Control Fanuc 31i-MA Spindle Dia. : 130mm Travel : XYZ – 3000/2000/1600 mm W – 700 mm Rotary Table (1/1000 ͦ) Size : 1600 x 1600 mm 2 Pallets Spindle Speed : 2500 rpm Tool type : BT50 ATC : 80 tools
bore capacity in steel (diameter): 40.0 mmthreading: M 24 throat: 293 mmbore stroke: 120 mmmorse taper: 3 Kurzspindel MKtable:: 515 x 360 mmturning speeds: 80 - 1125 U/minfeed: 0.10 + 0.20 mm/Ucolumn diameter: 115 mmdistance spindle /table: 117 / 701 mmtotal power requirement: 1.0 / 1.6 kWweight: 270 kgheight of the machine: 1840 mmFurnishing:- Lockable main switch with motor protection switch- Mushroom pushbutton (latching) for EMERGENCY STOP- Infinitely variable speed adjustment- Digital speed display- Feed overload protection- Protection class IP 54- Spindle protection with electrical fuse- Operating instructions in Germanincluding special equipment:- Thread cutting device pos. 20.0 (Thread cutting with stop)- Coolant device B pos. 25.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 18.0 mmthroat: 190 mmbore stroke: 80 mmmorse taper: 2 Kurzspindel MKturning speeds: 225 - 4.300 U/minvoltage: 400 / 50 Hz Volttable:: 300 x 240 mmcolumn diameter: 65 mmengine output: 0.37 / 0.55 kWweight: 110 kgFurnishing:- Large spindle speed range- stepless speed adjustment- machined base plate- Electrically secured spindle protection- Main switch lockable with motor protection switch- Reversing switch for clockwise and counterclockwise rotation- Operating instructions in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
