Manufacturer:
(Category: 101)
x-travel: 1.060 mmy-travel: 610 mmz-travel: 610 mmcontrol: Winmax 9 (Upgrade)table-size: 1.270 x 610 mmmax. table load: 1.100 kgnumber of T-slots: 5 T-slot - width: 18 mmT-slot - distance: 100 mmturning speed range - milling: ~ 10.000 U/minpower capacity - milling spindle: 18 / 11 kWtool taper: SK 40 Tool changer: 24 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 120 mmmax. tool length: 300 mmmax. tool weight: 7 kgfeed: ~ 15,4 m/minrapid traverse X-axis: 30 m/minrapid traverse Y-axis: 30 m/minrapid traverse Z-axis: 20 m/minweight of the machine ca.: 7,0 tdimensions of the machine ca.: 3,5 x 3,2 x 3 mChip conveyor: Coolantsystem: high pressure coolant: through spindle coolant: Signal-Light: elektr. hand wheel: Machining Center - VerticalHURCO VMX 42The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bridge type Machining Centre DMG DMC 100 V Hi-Dyn - 18.000 rpm - corse 1000x800x650 mm - CNC HEIDENHAIN i530, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 1250x800 mm, Longitudinal travel x axis: 1000 mm, Cross travel y axis: 800 mm, Vertical travel z axis: 500 mm, Measurement system: HEIDENHAIN optical scales, Working feed x-y-z axes: 0 - 35.000 mm/1, Rapid feed x-y-z axes: 50.000 mm/1, Spindle taper type: 40-Din 69871, Automatic tools change nr.: 30, Spindle speed: 0- 18.000 rpm, Spindle motor power: 15 Kw, Cnc: HEIDENHAIN i530, Approx net weight: 10.000 Kg, Accessories: Chip conveyor
Key data: 1050 mm, 560 mm, 460 mm
incl. Robojob Mill-Assist Manufacturer: Okuma Type: Genos M 560-V-e Travels: X: 1050 mm, Y: 560 mm, Z: 460 mm Table size 1300 x 560 mm Maximum table load: 900 kg Tool Stations 32 Control: Okuma OSP-P 300Ma-e (NC-controlled) Serial number: 0712-101084 Year of manufacture: 2018 Accessories: Chip conveyor High pressure pump 15 bar, Internal cooling pneum. Peeping tom loading door, Automation: Robojob Mill-Assist Essential Robot interface Length probe Renischaw
Key data: 1050 mm, 560 mm, 460 mm
Table size 1300 x 560 mm Tool Stations 32 Control: Okuma OSP-P 20 M Serial Number: 155968 Year of manufacture: 2011, retrofitted 2022 Accessories: Chip conveyor 4th axis, 0-point clamping plate 1 hinged quill
Dimensions (L/W/H): 830x320x1660 mmWeight: 56 kgTotal power requirement: 0,9 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 570x870x1710 mmWeight: 143 kgTotal power requirement: 1,1 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2920x980x1450 mmWeight: 1500 kgTotal power requirement: 12 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 25366 Specifications: - Drilling capacity 25 mm - Drilling spindle holder MK 3 - Drilling spindle speeds 100 / 205 / 345 / 440 rpm - 695 / 885 / 1450 / 2900 rpm - Drilling spindle stroke 130 mm - Drilling spindle projection 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis 415 mm - Y-axis 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space requirement approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vise
Travel X/Y/Z: 700mm/630mm/700mm, max. workpiece dimensions X/Y: 750mm/700mm, pallet clamping surface X/Y: 500mm/500mm, max. pallet load capacity: 500kg, tool holder: SK40, feed rate: 50m/min, rapid traverse: 50m/min, positioning accuracy: +/-0.004mm, repeatability: +/-0.001mm, spindle speed: 12000rpm. Machine dimensions X/Y/Z: approx. 4000mm/3800mm/3000mm, weight: approx. 12500kg, control: Fanuc Series 21i-MB, operating hours: approx. 42400h, spindle hours: approx. 11500h. Includes Renishaw OMP 40-2, central lubrication, and 4 pallets. Documentation available. On-site inspection possible. Expected to be available from January 2026.
The machine is in good technical condition, testing is possible by prior arrangement. X=750, Y=650, Z=550, rotary table r=650 Rpm 20k, iTNC 640 system, only 26,500 hours on the spindle, 60 slots
The machine is in good technical condition, testing is possible by prior arrangement.
Stanko 2K52 Admission in drilling-spindle (morse): Mk3 Base dimensions (1) Table dim (2) : 1.120 × 550 mm Longitudinal travel drilling-head (X-axis): 500 mm DEPTH OF THROAT: 800 mm Speeds: 63 tot ~ 1.600 rpm Height: 1900 mm Weight: 900 mm ACCESSORIES: 2000 mm Cooling system: 1620 kg Clamping system: yes
Offer 25319 Specifications: - Drilling capacity in steel ST 60 35 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 160 mm - Drilling spindle speeds 65 - 3250 rpm - 3 feeds 0.1 / 0.2 / 0.3 mm/rev - Projection 320 mm - Max. distance table - drilling spindle 560 mm - Table with 2 T-slots 500 x 420 mm - Height adjustable via rack with hand crank - Table left + right tiltable - Drive 400 V / 1.5 kW - Space requirement approx. W 550 x H 2200 x D 900 mm - Weight approx. 550 kg - with: - Right – Counterclockwise - Coolant device -Lighting
bore capacity in steel (diameter): 32 mmthroat: 265 mmbore stroke: 150 mmtaper MK: 3 MKtable-size: 390 x 390 mmfeeds: mm/Uturning speeds: 100 - 3300 U/mintotal power requirement: 1,5 KWweight of the machine ca.: 0,35 tdimensions: 0,8 x 0,6 x 1,95 mUnused display machine with:- Thread cutting attachment- Variable spindle speed- Coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 2000 mm, 500 mm, 550 mm
Specifications: Manufacturer: Chiron Type: Mill 2000 high speed Control: Heidenhain TNC 530 Year of Make: 2013 Travels: X 2,000, Y 500, Z 550 mm Working spindle Speed: 12,000 rpm Start table Dimensions L/W: 2,600 x 550 mm Table load: 1,000 kg Tool/movement Tool holder: SK40 Tool changer: 40-fold Measuring system: direct X/Y/Z Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Conveyor Preparation FK7 Loading automatically "opening and closing" Tub flushing
Manufacturer: Burkhardt + Weber BW Model: MC 120 Year of Make: 1999 Condition: Used Control: Siemens Sinumerik 840C Pallet sizes: 4 pieces 1000 x 1000 mm, 2 pieces 1250 x 1000 mm, 13 pieces 1600 x 1000 mm Pallet system length: 47000 mm Clamping area: 630 x 800 mm Table load: 1500 kg Spindle taper: DIN 50 Spindle speed: 6000 rpm Engine power: 37 kW B-axis travel: 360° Tool magazine: 144 positions Fuel tank capacity: 230 l Spindle bearing and spindle housing overhauled 09/2024.
Inv. Num. : 8763 Type: WH 10 NC Producer: TOS Created: 1987 Parameters: Work table length: 1120 mm Work table width: 1000 mm X-axis travel: 1150 mm Y-axis travel: 1000 mm Z-axis travel: 600 mm Spindle diameter: 100 mm
Offer 25380 Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Threading in steel ST 60 to M 42 - Drilling spindle holder MK 4 - Drilling spindle stroke 200 mm - Drilling spindle speeds infinitely adjustable 40 – 1100 rpm - Right - Counterclockwise rotation - 3 feeds 0.1; 0,16; 0.25 mm/rev - Projection 350 mm - Max distance drilling spindle – table / base plate 790 / 1210 mm - Table with 2 T-slots 630 x 540 mm Height adjustable via rack with hand crank - Drive 400 V / 1.6 / 2.9 kW - Space requirement approx. W 600 x H 2050 x D 980 mm - Weight approx. 650 kg - with: - Tapping device - Keyless chuck 1-13 mm - Emergency stop button -Lighting - Coolant device
Travel path X/Y/Z: 1035mm/560mm/510mm, table dimensions X/Y: 1200mm/560mm, max. table load: 1000kg, tool holder: SK40, tool stations: 20, spindle speed: 8000rpm, power: 13kW/9kW, torque: 83Nm/57Nm, feed rate: 20m/min, rapid traverse: 25m/min. Machine dimensions X/Y/Z: approx. 4000mm/4000mm/2600mm, weight: approx. 4500kg, control: Siemens Sinumerik 810D powerline, operating hours: 27241h. Including conveyor. Documentation available. An on-site inspection is possible.
Travel X/Y/Z: 2000mm/610mm/630mm, tool holder: SK40, spindle speed: 9000rpm, tool stations: 40, rapid traverse: 60m/min, table dimensions X/Y: 2100mm/720mm, max. table load: 1000kg. Control: Siemens Sinumerik 840D, operating hours: 18272h. Including conveyor and coolant system. Documentation available. An on-site inspection is possible.
x-travel: 980 mmy-travel: 630 mmz-travel: 630 mmControl: iTNC 530 total power requirement: 10 / 15 kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: 442,5 mEquipment:Electronic handwheelOperating mode 4Manual swivel milling headMotor spindle 12,000 rpmSK 40 / Clamping DIN 6987232-position tool magazineRigid table 1250 x 700 mmChip conveyorCoolant deviceSpecial price for collection ex works / EXW foundation EXW D-63110 RodgauList price ex warehouseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Travel X/Y/Z: 670mm/430mm/460mm, table dimensions X/Y: 900mm/410mm, max. workpiece weight: 350kg, tool holder: SK40, spindle speed: 8000rpm, spindle inner diameter: 60mm, max. spindle-to-column distance: 460mm, rapid traverse: 24m/min, feed rate: 10m/min. Machine dimensions X/Y/Z: approx. 2200mm/2050mm/2500mm, weight: approx. 3700kg, control: Heidenhain TNC 620, operating hours: approx. 21550h, spindle hours: approx. 3500h. Documentation available. An on-site inspection is possible.
bore capacity in steel (diameter): 80 mmarm length: 2000 mmworkpiece height max.: ca. 1300 mmborehole diameter: in Stahl 80 mmborehole diameter: in Guss 100 mmthreading in St 60: M 68 mmspindle turning speed range: 16 - 1250 U/minSpindle Speed: 32 Stückspindle bore diameter / taper: 110 mm / MK 5 spindle stroke: 550 mmnumber of feeds: 18 feed: 0,06 - 3,0 mm/Udistance spindle/base plate: 480 bis 1800 mmcolumn diameter: 500 mmspindle drive: 11 kWstroke drive: 4 kWtotal power requirement: 15 kWweight of the machine ca.: 8500 kgbase area: 3190 x 1250 x 3600 mmwith work table 1200 x 1200 x 720 mm, weight approx. 800 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Switch-on hours 51800 h Program running hours 15100 h Specifications: Speed, max.: 12,000 rpm Power: 77 kVA Weight, approx.: 18,100 kg
Travel X/Y/Z: 1800mm/900mm/900mm, table dimensions X/Y: 1950mm/900mm, max. table load: 3000kg, tool holder: SK40, max. spindle speed: 12000rpm, feed rate: 12m/min, repeatability: +/-0.003mm, positioning accuracy: +/-0.005mm, weight: approx. 17000kg, control: Heidenhain. Documentation available. An on-site inspection is possible.
A CNC profile drilling machine Voortman with a movable drilling cabin is available. Working height range: 30mm-1050mm, positioning speed: 40m/min, table width: 300mm, max. working width: 1800mm, support depth: 1500mm, tool stations: 5, max. travel speed: 40m/min, tool holder: SK40, drilling diameter range: 5mm-40mm, thread cutting range: M6-M30, working length: 16200mm. Documentation available. On-site inspection possible.
52.000 € 
