We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
CNC Deep Hole Drilling Machine Milling Machine for Tool and Mold Making Manufacturer CHeto Model HETO 2000 Year of construction 2005 Traactions xyzw 2000/1200/650/1500 mm, table load 12000 kg. Machine immediately available and available. Dismantling and loading onto suitable trucks is cost-effective. Installation and commissioning on request.
used
Universal deep hole drilling machine make DEGEN type UTB 500Machine -No: 061/86 built in 1986Technical specifications:Quill stroke / drilling depth: 500 mmTravel X (cross table): 400 mmTravel Y (vertical spindle head): 450 mmTravel Z (table lengthways): 250 mmDistance from the center of the spindle to the clamping surface: 250 mmmax.workpiece weight: 1000 kgTable surface area: 800 x 400 mmTable height: 1000 mmSpindle mount: MK 2Max.drilling diameter with twist drill / Speedbit drill: 16/25 mmmax.thread diameter: 16 mmQuill feed: 0 - 150 mm / min.Rapid traverse quill: 3.6 m / min8 spindle speeds: 240 - 2400 rpm.Drive power spindle: 0.8 / 1.3 kWCoolant pump: 0.07 kWServo motor: 0.65 kWTotal power requirement: 2 kWWeight approx: 980 kgDimensions L x W x H (with control panel) approx: 2420 x 1200 x 1850 mmWith- Control panel with digital display for drilling depth and drilling cycle- 2-axis ...
used
Height of bed rail until mid-drilling: 315 mm Gr. On drill bit Ã?: 178,3 mm Bed length: 9400 mm Drilling depth approx.: 3150 mm Continuous feed range: 70-1750 mm / min Rapid traverse speed: 4.25 m / min Spindle box, bore: 62 mm Main spindle RPM: 180-1000 rpm Main spindle drive: 380 V, 15 kW Machine weight: 6.6 t
used
Solid drill diameter: 200 mmbore depth: / mmnumber of spindles: / Technical specificationsPower: 129kWControl: Siemens NC controlSpeed range (stepless): 2 - 300 rpmFeed range (in steps): 3 - 4500 mm / minOil system capacity: 20,000 litersMaximum flow rate: 1500 l / minCircumferential diameter in bezel: 1100mmCircumferential diameter over bed: 1250mmDistance between centers: 11000mmClamping diameter faceplate: up to 1100mmMax. Workpiece weight with a stick: 10tClamping range of the two steady rests: 150 - 1100mmClamping range BOZA: 1 = 200 - 400mm 2 = 400 - 800mmdimensionMin. Outside diameter: 406 mmMax. Outside diameter: 850mmWall thickness: 10 150mmMax. Workpiece length: 11000mmMax. Workpiece weight: 10 tMax. Strength: 800 N / mm²Specific cutting resistance (Ks): 2000 2100 N / mm²Machine dataMachine length: 28,800mmCenter height: 560mmCircumferential diameter over ...
used
Specifications Power: 129kW Control: Siemens NC control Speed range (stepless): 2 - 300 rpm Feed range (in steps): 3 - 4500 mm/min Capacity oil plant: 20,000 liters Maximum flow rate: 1500 l/min Swing diameter in bezel: 1100mm Swing diameter over bed: 1250mm Center distance: 11000mm Clamping diameter face plate: up to 1100mm Max. workpiece weight with one setting stick: 10t Clamping range of the two bezels: 150 - 1100mm Clamping range BOZA: 1 = 200 - 400mm 2 = 400 - 800mm Dimension Min. outer diameter: 406 mm Max. outer diameter: 850mm Wall thickness: 10150mm Max. workpiece length: 11000mm Max. workpiece weight: 10 t Max. strength: 800 N/mm² Specific cutting resistance (Ks): 20002100 N/mm² Machine data Machine length: 28.800mm Center height: 560mm Swing diameter over bed: 1120mm Solid drilling diameter: 200mm Core drilling diameter: 350mm Boring d ...
used
Specifications: Drilling movement 1000 mm Manual travel : Y = 400 mm X = 700 mm W = 1400 mm Table surface 1200 x 600 mm Table rotatable +/- 180° Adapter SK 40
used
Machine Details Warehouse number 1105-03722 Machine type Deep hole drilling machine Make IXION Type TL 500 SVA Year of construction 1985 Control type CNC Control CNC Bosch Alpha Storage location HAGUENAU Country of origin GERMANY Delivery time immediately Freight base from stock Technical details Core drilling diameter - max. 1.5 - 18 mm Drilling depth 600 mm Clamping table, rigid 700 x 1,350 mm Clamping surface of the rotary table 1,000 x 500 mm Longitudinal movement of the table 600 mm Table displacement in drilling direction 400 mm Table rotatable 180 ° Vertical adjustment of the drill carriage 250 mm Drilling unit swivel +/- 15 ° Spindle cone MK 3 Number of speeds 8 Speed range 240 - 2,400 rpm Control CNC Bosch Alpha Motor power 1.0 / 1.6 kW Total power requirement 10 kVA Machine weight approx. 1.35 t Space requirement approx. 2.0 x 1.5 x 1.8 m Infor ...
used
core drilling diameter max.: 8 - 40 mmbore depth: 1300 mmswing diameter: . mmtable load: 7 / 10 ttable surface area: 1500 x 1000 mmtravel -x axis: 2000 mmtravel -y axis: 800 mmtravel -z axis: 2000 mmtravel -w axis: 1700 mmdrilling capacity diameter max.: 40 mmturning speed range - drilling: 60 - 6000 U/minmilling drive: 7/11 kWspindle taper ISO: 40 Control: Siemens 840D A-Axis: -25 / +15 °B-axis (table): 360 °total power requirement: kWweight of the machine ca.: tThe Auerbach IXION IA3 TLF is for deep drilling of cubicand rotationally symmetrical workpieces.Scope of processing: deep drilling, milling of outer contours, pockets,Grooving, centering, drilling, reaming, tapping, double inclined drilling.equipped with:- Siemens Sinumerik 840 D with electronic handwheel,- chip conveyor- Coolant through Spindle- Tool Control- Steady- The data for this ad was created with ModulMWS - the soft ...
used
Kramatorsk Model KJ1910 serial number 1913 Swing Over Bed: 1600mm Maximum Workpiece Length: 6300mm Maximum Drilling Diameter: 991mm Spindle power: 125.00kW Spindle Speed: 1 - 320 RPM Infinitely Variable power Existing Additional Chuck workholding range: 200 - 1250mm diameter, workpiece weight capacity using two open roll supports: 60,000kg, size range in closed backrest: 200 - 800mm, size range in open backrest: 630 - 1380mm, pressure head speed range: .125 - 500 infinitely variable, pressure head spindle bore diameter: 182 mm, pressure head motor power: 75kW DC, headstock speed ranges: 3, pressure head speed ranges: 2 Machine Length: 22950mm Machine Width: 4375mm Machine height: 2670mm Weight: 101091kg Condition Good
used
Kramatorsk KJ 1910 10-meter boring depth - Heavy duty: 25-ton workpiece >>> NOTE: MACHINE IS IN OUR WAREHOUSE IN ITALY
used
Kramatorsk KJ 1910 10-meter boring depth - Heavy duty: 25-ton workpiece >>> NOTE: MACHINE IS IN OUR WAREHOUSE IN ITALY
used
Deep hole boring machine - heavy duty deep hole boring machine Kramatorsk (Russia) KJ 1910 Year of manufacture 1986 Maximum boring diameter, mm 600 Maximum use of lenght mm 10000 (10 meters) Max 25 ton Machine in our warehouse in Northern Italy Center height over the bed, mm 670 Maximum work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000.. 10000 Work piece diameter range, mm: -in chuck of faceplate 200th.. 1100 -in open rest 400... 900 -in closed rest 200... 630 -in round rest 250... 550 Maximum work piece weight 25000 kg Range, 2 200 rpm spindle speeds Spindle diameter hole mm 700, Main motor power, kW 85 Counter rotation motor is 95kW Machine overall dimensions, mm 25550 x 3000 x 2290 Machine weight, kg 83000 Mimu machine tools (Italy) machine tools
used
Deep hole drilling machine / deep hole drilling machine make LOCH type TB 2-11 / 300/2Fabr. -No: 182-300-1970, year of construction 1991Technical specifications:Max drilling depth with submersible spindle: 300 mmWorkpiece diameter / full drilling range in steel: 4 - 18 mmNumber of spindles: 2Drilling system: ELBDrilling method: rotating tool: counter-rotating workpieceWorking stroke, full + boring max .: 1000 mmCenter height: 249.9 mmMain spindle speed: 96 - 2500 rpm.Speed levels: 4Infinitely variable feed: 0 - 1000 mm / minRapid traverse forwards + backwards: 6 m / sec.Tapping feed rate: 60%Spindle mount: DIN 55022 Gr. 5Working pressure: 200 barMain drive motor power: 15/19 kWMotor power counter-rotating tailstock: 5.5 kWTotal weight approx .: 8.0 tfor further data see AWF cardwith- Control SIEMENS SPS-S5-115 U- 2 drilling spindles- chip conveyor- cooling deviceused, in good conditionP ...
used
core drilling diameter max.: 16 mmbore depth: 485 mmswing diameter: x mmtable-size: 590x350 mmspindle turning speed range: 230-2300 U/minweight of the machine ca.: 0.4 tTable with digital read outMisc accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Mollart Sprint 500, deep hole drilling machine, Fanuc Power Mate control, Max L = 500mm, Dia 20 mm, Spindles: 2, Spindle rotation: 10000 RPM, 100 RPM counter spindle rotation, Max pressure 100 BAR, The machine can be inspected under power in our warehouse in Gussago BS., Mimu machine tools, Deep hole drilling is the machining of holes with a relatively large depth to diameter ratio, whereas normal drilling techniques produce holes where the depth is rarely more than five times the diameter (5 xD). In deep hole drilling the ratio may reach 150:1, and any hole deeper than ten times the diameter (10 xD) should certainly be considered a deep hole, requiring a specialized drilling technique., Deep hole drilling can employ various machine set-ups: rotating workpiece, rotating tool, or both tool and workpiece rotating. The most common, however, is for the workpiece to rotate, ...
used
: 0 bore depth: 10000 mmnumber of spindles: 0 Control: Siemens Simatic Touch SPS swing over bed: 1050 mmswing diameter over bed slide: 1600 mmboring diameter: 50 - 310 mmcentre height: 800 mmspeeds:: 2,5 - 400 total power requirement: 74 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
The deep hole drilling machine have 6 spindles and is in very good condition, LIKE NEW! This can be like to inspect under pressure. On request we can send you more pictures. Number drill spindle 6 ELB and BTA drilling Min. drilling diameter 3 mm Max. drilling diameter 20 mm Max. drilling depth 1000 mm We see ourselves as a competent partner for downhole drilling, turning, milling and welding in paid labor. We will gladly make you an offer!
used
core drilling diameter max.: 25 mmbore depth: 1200 mmswing diameter: 160 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
TBT M1-4-320 4-Spindle deep hole boring machine, gundrilling interesting price Mimu Machine Tools (Italy) - Note: in our warehouse Mimu Machine Tools (Italy)
new
Sell a TBT quill block, Condition new. Pinol block has never been installed. Original price is 30.800,00 Euro net. .VB
used
Deep hole drilling machine make TBT type T10-500Machine -No: 410 311 053 built in 1980Technical specifications:Max drilling depth: 500 mmDrilling range in steel: 3 -12 mmBoring max. 15 mmMin.spindle speed: 2520 1 / minMaximum speed of the work spindle: 8000 1 / minInfinitely variable feed: 8 - 160/35 - 320 mm / minRated speed continuously variable transmission: 5.9 - 53 / 11.8 - 106 1 / minControl range: 9Rapid traverse speed: 3 m / minCenter height above ground: 1150 mmCenter height over bed: 230 mmCenter height over table / slide: 180 mmTable dimensions: 420 x 1030 mmTable grooves design and size: DIN 650/4Coolant tank min / max: 590/670 ltrTotal connected load: 9.0 kWExternal dimensions: 3400 x 1700 x 1800 mmWeight approx: 2500 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are ...
used
Several deep hole drilling machines to be delivered at once, approx. 10 pieces Ideal for drilling rifle barrels! These are the types: T 20-2-750 T 20-S-750 TE10-2-500 T30-1000 T10-2-250 T10-2-500 T20-500
used
Deep hole drilling machine make TBT Tiefbohrtechnik type T 10-250Machine no. 418.311.215, year of construction 1989 with control SIMATIC S5Technical specifications:Max. Drilling depth: 250 mmTable size 420 x 780 mmDrilling area steel ST 60 full drilling: max 16 mm Boring: max 20 mm:Drilling process: ELB (single-lip drilling)Number of drilling spindles: 1Main spindle drive: 2.6 / 3.2 kWSpeeds: 1020 - 4400 rpm: 1960 - 2950 rpm: 2950 - 4400 rpm: 4400 - 8950 rpmFilters: plate filter 60 l / minCooling lubrication system: 670 l deep drilling oilelectrical connection: 380 V, 15 kWExternal dimensions of the system including SS L x W x H: 3850 x 1800 x 2000 mmWeight approx .: 2200 kgWith- SIMATIC S5 115 U ELGO 85 P controller- separate control cabinet- internal cooling- various single-lip drills (see photos)- workpiece counter- coolant system- filter- Central lubrication unit- Instruction manual ...
used
Ref. -No.: 10142Manufacturer: TIBOYear of construction: 2002Type of control: CNCControl: Siemens Sinumerik 802DStorage location: HalberstadtCountry of origin: DeutschlandDrilling diameter: 1-13 mmBore Depth: 250 mmDrilling spindle speed: 11.000 RPMX-Travel: 300 mmY-Travel: 210 mmZ-Travel: 250 mmMachine weight: 2,5 tFurther information:- With equipment
used
3-spindle deep hole drill -without electrics- Year of construction 1998 / rebuilding 2014
used
core boring: 70-560 mmbore depth: 20000 mmdrilling diameter: 70-500 mmcore boring capacity in St 60 - reboring: special: 560-1000 mmworkpiece diameter: 3200 mmworkpiece weight: 200 tfaceplate diameter: 2900 mmspeed of boring spindle:: 100 - 500 U/minfeed range: 3 - 2000 mm/minboring spindle drive: 55 kWspindle head drive: 150 kWworkpiece turning speeds: 230 U/mincontrol: Fanuc total power requirement: - kWweight of the machine ca.: - t2010 Retrofittedequipped with:- Fanuc Control- 4-Jaw Chuck- Oil Pressure Head- Boring Head- Drill Head- 2-Point Rollers Steady Rest (4)- 3 Point Steady Rest (2)- Bar Rest (2)- Coolant & Coolant Piping- Chip Conveyor- Honing Oil Tank & Honing Tool BarsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Horizontal hand lever deep hole drilling machine make UNKNOWNTechnical specifications:Table size: 230 x 340 mmDrill chuck size: 20 mmDrive power: 2.95 hpDimensions approx: 1000 x 850 x 1400 mmWeight approx: 150 kgWith- height adjustable table- Drill chucks up to 16 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Flange drilling machine make WÖLFEL type TH 11Mash. -No: 35230Drilling capacity: 30 mmSpindle mount: MK 4Projection: 375 mmQuill stroke: 180 mmTable diameter: 800mm12 spindle speeds: 50 - 2120 rpm.4 automatic feeds: 0.1 - 0.25 mm / revDrive power: 1.5 / 2.2 kWDimensions: 900 x 1800 x 2000 mmWeight approx: 1500 kgWith- Table scale adjustment (rotary table)- Thread cutting device- deep hole drilling- Cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools