Manufacturer:
(Category: 101)
x-travel: 3000 mmy-travel: 800 mmz-travel: 800 mmtotal power requirement: kWweight of the machine ca.: 16000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1050 mmy-travel: 600 mmz-travel: 600 mmtotal power requirement: kWweight of the machine ca.: 7200 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 550 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: kWweight of the machine ca.: 9000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 505 mmy-travel: 355 mmz-travel: 610 mmcontrol: Heidenhain TNC 430 total power requirement: kWweight of the machine ca.: 4000 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
BAZ Alzmetall GS 1000 BJ 2014
Inv. Num. : 3901 Type: COMBI-U7 Producer: KIHEUNG Created: 2016 Parameters: Control system: HEIDENHAIN TNC 620 Switch-on hours: 2590 h Hours: 2389 h Work table length: 1800 mm Work table width: 700 mm Maximum table load (uniform): 3000 kg Number of axes: 3 pieces Tool magazine: 24 pieces Maximum vertical spindle speed: 4000 1/min X-axis travel: 1600 mm Y-axis travel: 750 mm Z-axis travel: 900 mm Cone: ISO 50 Motor power: 20/30 kW Working feed: 10000 mm/s Number of T-slots in the table: 5 pieces Machine weight: 13 t Equipment: Swivel head (90°) Swivel head cycles through the program 90 degrees horizontally or vertically to the left or right
x-travel: 835 mmy-travel: 510 mmz-travel: 510 mmcontrol: iTNC 530 ERGOLine HeidenhainMain spindle:: turning speed range - main spindle: 20 - 10.000 min/-1power capacity - main spindel: 13 / 9 kWtool taper: SK 40 DIN 69871max. Torque: 83 / 57 Nmwork table:: table surface area: 1.000 x 560 mmmax. table load: 800 kgnumber of T-slots: 5 T-slot - width: 14 mmT-slot - distance: 100 mmTool-Presetter:: number of toolpositions: 20 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 250 mmmax. tool weight: 6,0 kgfeeds:: rapid traverse ( X / Y / Z ): 30 m/minfeed speeds: 1 - 20.000 mm/minfeed power: 5.000 Ntotal power requirement: 28 kVAweight of the machine ca.: 4,0 tdimensions of the machine ca.: 4,5 x 3,5 x 2,8 mDocuments: Chip conveyor: Automatic Tool Changer: 20 pos. Coolantsystem: high pressure coolant: paper band filter: elektr. hand wheel: Rotary ...
x-travel: 835 mmy-travel: 510 mmz-travel: 510 mmcontrol: iTNC 530 ERGOLine HeidenhainMain spindle:: turning speed range - main spindle: 20 - 10.000 min/-1power capacity - main spindel: 13 / 9 kWtool taper: SK 40 DIN 69871max. Torque: 83 / 57 Nmwork table:: table surface area: 1.000 x 560 mmmax. table load: 800 kgnumber of T-slots: 5 T-slot - width: 14 mmT-slot - distance: 100 mmTool-Presetter:: number of toolpositions: 20 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 250 mmmax. tool weight: 6,0 kgfeeds:: rapid traverse ( X / Y / Z ): 30 m/minfeed speeds: 1 - 20.000 mm/minfeed power: 5.000 Ntotal power requirement: 28 kVAweight of the machine ca.: 4,0 tdimensions of the machine ca.: 4,5 x 3,5 x 2,8 mDocuments: Chip conveyor: Automatic Tool Changer: 20 pos. Coolantsystem: high pressure coolant: paper band filter: Rotary screen: test probe: ...
Control Siemens 840D powerline Travel X/Y/Z 630/630/630 mm 2-fold pallet changer Speed 10000 1/min Knoll coolant system with paper belt filter Tool holder: SK40 Tool magazine 80 spaces
Mazatrol Matrix Control Travel X-axis: 630 mm Y-axis: 765 mm Z-axis: 510 mm A-axis: +30°/-120° C-axis: 360° Max. distance from spindle nose to table top edge (table horizontal): 740 mm Min. distance between spindle nose and top of the table (table horizontally): 230 mm Max. distance from spindle nose to table center (vertical): 690 mm Min. distance from spindle nose to table center (vertical): 180 mm Max. table load: 500 kg Max. workpiece diameter: 730 mm Max. workpiece height: 500 mm Pallet Changer – Mazak Palletech System 6-fold pallet changer Pallet size: 500 x 500 mm Milling spindle SK-40 Max. spindle speed: 12,000 rpm Drive power milling spindle: 22Kw Tool magazine Number of tool positions: 120 Other equipment • 5-axis simultaneous machining • Synchronized tapping • Rapid traverse constant angle of inclination when moving 3D coordinate conversio ...
FPT SIRIO-M Control: Heidenhain TNC 426 C Serial Number: LM0498020 Machine number: 1710799 CNC milling head automatically swivelling infinitely variable Spindle: ISO 50, 50 kW, up to 3000 rpm Hydrostatic Guides Travel (X/Y/Z): 4000 / 1200 / 2000 mm Table size: 5000 x 2000 mm Tool changer: 30-fold ATC (automatic)
Key data: 650 mm, 500 mm, 500 mm
Specifications: Manufacturer: Spinner Type: MVC610 V3 Year of Make: 2009 Control: Siemens 840D SL ShopMill Travel X/Y/Z: X 650 mm Y 500 mm Z 500 mm Switch-on hours: 15,824 h Working spindle Speed: 10,000 rpm Workbench Dimensions L/W: 800 x 450 mm Tool Tool holder: SK40 Tool changer: 24-fold Dimensions and weight Weight: approx. 4,800 kg Condition Condition: Used Functional: Tested and fully functional
DECKEL MAHO DMU 60 monoBLOCK 5-axis machining center GENERAL Project No.: 905799 Quantity: 1 pcs. Manufacturer: DECKEL MAHO Type: DMU 60 monoBLOCK Control: Heidenhain Millplus iT Year of Make: 2008 Condition: Used machine Approx (hrs): 38596 Spindle in approx. (hrs): 200 Program run approx. (hrs.): 16181 DESCRIPTION MILL 5 axes Travel in X 730 mm Travel in Y 560 mm Travel in Z 560 mm Max. rapid traverse speed in X/Y/Z 30/30/30 m/min Tool holder HSK 63 Max. speed milling spindle 18000 1/min Milling head NC-controlled swivel -120/+30 degrees Chain tool magazine 60 stations Machine table 1000x600 mm Rotary table NC-controlled Diameter of rotary table 600 mm OTHER EQUIPMENT IR Workpiece Probes Splash protection cladding with partially clad work area Rotating viewing window Lighting in the work area Preparation for central oil/emulsion mist ...
Offer 25490 Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 160 mm - Digital speed display - Projection 300 mm - Turning table with vice 440 x 440 mm - Column diameter 145 mm - Feeds-Electromagnetic 0.1 - 0.2 - 0.3 - 0.4 mm/rev - Drilling spindle speeds infinitely adjustable with digital display - 200 - 3200 rpm - Drive 400 V / 1.8 / 2.9 kW -Lighting - E. footswitch - Space requirement approx. W 650 x H 1900 x D 800 mm - Weight approx. 470 kg
WORKING RANGE, Longitudinal (X) 1250 mm, Vertical (Y) 1000 mm, Transversal (Z) thread axis 380 mm, Drilling depth (V) 1000 mm, Drilling head inclination ( C) +/-20 °, Table rotation (B) 360,000x0.001 °, Workpiece approach (W) 500 mm, CNC, Measuring system optical scales, CNC SELCA 4040D, DRILLING UNIT, Min-max diameter from solid 5-40 mm, Spindle power 10 Kw, Rotation speed 4.200 Rpm, Drilling type gundrill, Drilling head inclination ( C) 40 (+/-20) °, FEEDS, X rapid 10 m/min, Y rapid 10 m/min, Z rapid 10 m/min, V rapid 10 m/min, TABLE, Surface 1000x800 mm, Resolution (B axis) 0.001 °, Static capacity 4.000Kg / dynamic 8.000 Kg, COOLANT SYSTEM, Tank capacity 650 l, EXTRA, Total installed power 30 Kw, Machine weight 17.500 Kg, Machine dimensions 5000x2600x3300 mm, Information about technical data are not binding., Machine available subject to prior sale.
Inv. Num. : 8817 Type: M-300L2 Producer: MORI SEIKI Created: 1994 Parameters: Control system: FANUC MF-M4 Maximum vertical spindle speed: 6000 1/min X-axis travel: 3000 mm Y-axis travel: 500 mm Travel Z axis: 470 mm
Mori Seiki NV 5000A/40 machining center is for sale. The machine can be viewed at any time!
BAZ DMC 70V for sale
spindle diameter: SK 30 mmx-travel: 420 mmy-travel: 240 mmControl: Heidenhain TNC 355 total power requirement: 10 kWweight of the machine ca.: 1,4 tdimensions of the machine ca.: 2 x 2 x 2 mNo. 5356Vertical drilling and milling machineFEHLMANN Picomax 51 CNC 3Working area: 420 x 240 x 120 / 450Drive: 4 kWControl: Heidenhain TNC 355Table 720 x 280 mm / 120 kg loadSpindle holderSpeed range 55 - 9,000 min-1Space requirement approx. 3 x 2 x 2.4 mWeight approx. 1,500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : 2024 : 3983 : prompt, Zwischenverkauf v : Spanien : 7260 €: 140.12 €: 1 : 1 : 32 mm: MK 3 : 250 mm: 65 - 125 - 185 - 365 - 54 U/min: 1,8 / 2,6 kW: M24 : 600 mm: 640 mm: 2020 mm: 260 kg: 100 mm: 85 - 635 mm: 1.170 mm: 300 x 270 mm: 600 x 380 mm: 120 mmERLO (MADE IN SPAIN)FOR DEMANDING WORKSHOP USEgeardrive machinemanual feedleft-right drillingtable with t-slotsdepth adustable endtool ejectordrill guardCE normsuser manual in GERMAN(sample photo)OPTIONS:lighting equipment€ 260,--coolant equipment and machine base with T-slots€ 910,--reverse for tapping€ 810,--DELIVERY TIME WITH OPTIONS APPROX. 6 WEEKS.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mmarm length: 950 mmturning speed range: 102 - 2000 U/minturning speeds steps: 12 bore spindles - Morse Taper: MK 4 quill stroke: 160 mmfeed range: 0,075 x 0,3 mm/mintable surface area: 1200 x 510 mmtotal power requirement: 2 kWweight of the machine ca.: 1,9 tdimensions of the machine ca.: 1,8 x 1,2 x 2,25 mCompact style with hydraulic fast-clamping, motorised height adjustment, feeder device and thread-cutting device. Integrated coolant container in machine frame. Main switch.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 762 mmy-travel: 508 mmz-travel: 508 mmControl: HAAS Number of working hours: 10.000 / 5.000 hswivable table:: Ø 630 x 500 swivelable +/-: +120/ -35 x 360 °Interference circuit diameter: 680 mmtotal power requirement: 22,4 kWweight of the machine ca.: 7 tdimensions of the machine ca.: 5 3 3 mWIPS tool - measuring probeChip conveyorSpecial price EXW / from foundation 02791 ODERWITZList price ex warehouse FCAThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : 1530 mm: 16 mm: 12 mm: 7 1/min: 3 °: 8 : 500 mm: 22.5 kW: 250 l: 950 mm: 2350 mm: 1400 mm: 2000 mm: 5200 kghydr. drive unit, completely integrated in the machine bodyoverload safety, hydraulic and electricaladjusting of the cutting angleadjusting of the cutting gapblank holder pressure, adjustablesupport arm with angle stop and scale up to 600 mm4 rotating knives for VA steelmovable pedal switch with solenoid valvesMotorised backgaugeCentral lubricationexchangeable machine table supportsection area lightingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 560 mm, 410 mm, 450 mm
YCM Supermax YCM-56 T X-560 mm Y-410 mmZ-450 mm 4 and 5 axis Control: Fanuc MXP 200i Table 700X420 mm Works flawlessly Location: CH
Precision three spindle boring machine, max. dia. 80 mm
: gebraucht : 2021 : 3965 : prompt, Zwischenverkauf v : Taiwan : 15600 €: 1 : 12480 €: 42 mm: MK 4 : 280 - 1.100 mm: 44 - 1.500 (12) U/min: Stahl: M 25, Guss: M 38 : 1880 mm: 870 mm: 2210 mm: 1800 kg: 470 - 1.270 mm: 0,05 - 0,15 (3) mm/min: 2.2 kW: 260 mm: 280 mm: 1.725 x 715 x 180 mm: 0,75 kW: 635 x 520 x 415 mm: 2530 mmDEMO MACHINEleft/right rotationautomatic feeddrilling depth limitmanual headstock adjustment with mechanical clampingelectric height adjustment of extension arm and mechanical clampingmechanical clamping of swivel movement of extension armcentral operation panel on the front sidepower load readout for drilling spindlehand wheel for spindle fine feedcoolant equipmentmachine lampbox tablemachine and equipment according to the CE-regulationsoperating manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 610 mmy-travel: 510 mmz-travel: 610 mmtable-size: 760 x 510 mmworkpiece weight: 1350 kgspindle taper:: SK 40 spindle turning speed range: 15000 U/minspindle motor: 9 kWdistance spindle /table: 150-760 mmrapid traverse: 38/38/32 m/minControl: WinMax 5 total power requirement: 19 kVATotal weight, approx.: 5000 kgdimensions of the machine ca.: 2,3 x 2,95 x 2,55 m3-axis machining centre with electric spindle (D series) equipped with:- WINMax 5 CNC control with 3D simulation graphics & handwheel- 30-fold Toolchanger (SK 40)- Chip conveyor- Renishaw probe- Dynamic diret tdrives on all axes- High-pressure cooling system- Spindle coolerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 730 mmy-travel: 730 mmz-travel: 880 mmControl: FANUC 31i-B spindle turning speed - stepless: 15000 U/minspindle taper: BT 40 Big Plus spindle motor: 18,5 / 30 kWpallet table size: 500 x 500 mmworkpiece weight: 500 kgdistance spindle center to table: 80 - 810 mmRapid Travel X / Y / Z-Achse: 60 m/mindimension of workpiece: 800 x 1000 mmtotal power requirement: 80 kVAweight of the machine ca.: 11,5 tdimensions of the machine ca.: 5,45 x 2,68 x 2,88 mHorizontal CNC machining centre- CNC control FANUC 31i-B- Tool changer 60-fold (BT 40 Big Plus)- 2 pallet changer(pallet 24-M16)- Table / Pallet indexing Full B axis.- Pullstud Nikken PS-806. Maximum torque 229.9/ 206.9/ 147.2/ 119.4N.m.- Coolant/Filtering Unit- Chip Conveyor- ExhausterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
AMARON s.r.o.
