Manufacturer:
(Category: 101)
Vertical Machining Cenre DUGARD EAGLE 1500
CONTROLS CNC controls HEIDENHAIN ITNC 530 WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 5 X-axis travel: 200 mm Y-axis travel: 200 mm Z-axis travel: 280 mm rotating range A-axis from: -10 ° rotating range A-axis up to: 130 ° rotating range C-axis from: 0 ° rotating range C-axis up to: 360 °SPINDLE / HEAD spindle revolutions (min): 3000 /min spindle revolutions (max): 42000 /min tool fixture: HSK E32 TOOL MAGAZINE number of positions: 60 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 2200 mm space requirements -front/back-: 3700 mm total height: 2400 mmEquipment:- Renishaw ...
bore capacity in steel (diameter): 50 mmthroat: 350 mmbore stroke: 180 mmthread capacity: 35 Mspindle taper MT: 4 MKcolumn diameter: 150 mmbore spindle turning speed range: 132-1852 U/mintable-size: 480x480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 800 mmy-travel: 750 mmz-travel: 770 mmControl: FANUC Prof 3/A rapid travel x/y/z: 30000 mm/minpalets changer: 630 x 630 table weight: 1200 Kgspindle speed:: 14000 U/minspindle taper: HSK A 63 spindle motor: 30/25 kWtool change unit: 40 posdistance spindle center to table: 100-850 mmInternal cooling system: weight of the machine ca.: 17 tdimensions of the machine ca.: 7,9 x 4,2 x 3,3 mEquipped with:- Fanuc Professional 3/A CNC control- Coolant through spindle- Pallet changer- Tool changer (HSK-A63)- Knoll coolant system (renewed)- Chip conveyor- Mütek briquette press (2015)The machine has been used reliably in single-shift operation in recent years, operating hours: Spindle hours:The scope of delivery includes numerous HSK-63 tool holders – both thosecurrently in the machine and a complete Euro pallet withadditional tool holders.- Two clamping towers (without pallets)The ...
Travel X/Y/Z: 1600mm/1000mm/1100mm, workpiece carrier (pallets) X/Y: 800mm/800mm-1000mm, change time: 38s, table rotation range: 360°, max. table load capacity: 2000kg, feed rate: 10m/min, rapid traverse: 15m/min, spindle power: 32kW, tool positions: 50, spindle taper: ISO50, speed: 4500rpm. Machine dimensions X/Y: 5800mm/5200mm, weight: approx. 25000kg. Documentation available. An on-site inspection is possible.
bore capacity in steel (diameter): 32 mmthroat: 300 mmbore stroke: 150 mm: MK 4 : 480 x 480 mm: 0,1 - 0,2 mm/U: M 22 (St 60) : 35 mm: 80-1170 U/min: 2,3 kW: 350 kg: 800 x 1000 x 2000 mmAccessories:- Automatic feed- Coolant device in the foot- Automatic thread cutting reversal- stepless speed adjustment- adjustable drilling depth stop- spindle protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 20137 Technical data: - 3 stationary tapping machines can be positioned - Tapping capacity up to approx. M 12 - Tapping depth approx. 75 mm - Drill feed infinitely adjustable - Spindle speeds up to 490 rpm - Pneumatic connection 6 bar - Drive 400 V - Space requirement approx. W 2000 x H 1600 x D 900 mm - Weight approx. 150 kg
: 95 mmShort spindle: MK 2 spindle turning speed range: 100 - 4200 UpMthroat: 200 mmfeed: von Hand weight of the machine ca.: 81 kgOverall size: 650x300x850 mmStandard equipment:- Number of speed ranges 10 steps- Movable LED machine light- Swivel work table +/- 45 degrees- Mains cable and plug ready for immediate use- Drilling table adjustable via gear rack- Depth stop with scale- Emergency stop- In accordance with current CE conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 15 mmthroat: 220 mmbore stroke: 80 mm: 2 speeds: 320 - 1600 U/mintable-size: 350 x 285 mmweight: 125 kgdimensions: 700 x 600 x 1500 mmFeatures:- Microdosing- Thread cutting M2-10The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 105 mm, 2500 mm, 1850 mm
CNC Heidenhein TNC 124 table 1750 mm x 2000 mm spindle dia. 105 mm x - 2500 mm, y - 1850 mm, z- 1400 mm, w - 700 mm
Technical data: - Drilling capacity 25 mm - Drilling spindle holder MK 3 - Drilling spindle speeds 100 / 205 / 345 / 440 rpm - 695 / 885 / 1450 / 2900 rpm - Drilling spindle stroke 130 mm - Drilling spindle projection 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis 415 mm - Y-axis 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space requirement approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vise
Offer 25498 Technical data: - Drilling capacity 50 mm - Tapping device up to M 40 mm - Tool holder MK 5 - Spindle stroke 280 mm - Spindle speeds 38 - 2000 rpm - 6 feed speeds 0.08 - 0.83 mm/rev - Drive 400 V / 5.5 kW - Radius min. / max. 350 / 1400 mm - Removal of spindle - machined base plates - min / max 350 / 1250 mm - Machined base plate with T-slots W 1650 x D 930 mm - electr. Central clamping - Coolant device + lighting - Dice table - Space requirement approx. W 2300 x H 2400 x D 1050 mm - Weight approx. 3500 kg
bore capacity in steel (diameter): 23 mmthroat: 220 mmbore stroke: 120 mmNumber of revolutions: 25 - 3.200 U/mindistance Spindlenose and center of table: 275 mmtable surface area: 300 x 355 mmT-slots: 3x T - slots distance: 120 mmcolumn diameter: 110 mmtotal power requirement: - kWweight of the machine ca.: ca. 120 kgdimensions of the machine ca.: 0,8 x 1,0 x 1,9 mTable Drilling MachineIXION - BT 23 ST- incl. base cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 25 mmthroat: 220 mmbore stroke: 110 mmtaper MK: 3 MKtable-size: 350 rund mmfeeds: mm/Uturning speeds: 100 - 2080 U/minconnected load frequency: 400 Vtotal power requirement: 0,9 KWweight of the machine ca.: 0,2 tdimensions: 0,8 x 0,6 x 1,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mmarm length: 950 mmturning speed range: 51 - 1000 U/minturning speeds steps: 12 bore spindles - Morse Taper: MK 4 quill stroke: 160 mmfeed range: 0,075 x 0,3 mm/mintable surface area: 1200 x 510 mmtotal power requirement: 2 kWweight of the machine ca.: 1,9 tdimensions of the machine ca.: 1,8 x 1,2 x 2,25 mHigh-speed radial end mill with- Thread cutting attachment- Vertical table 750 x 620 mm- Horizontal table 1200 x 510 mm- Emergency stop device- DocumentationMachine-No. 445The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 40 / 23 mmthroat: 320 mmbore stroke: 180 mm: 4 speeds: 30 - 765 U/mintable-size: 720 x 550 mmweight: 480 kgdimensions: 750 x 900 x 1900 mmEquipment:- Multi-spindle head, drill Ø 23 mm- automatic feed- coolant device- infinitely variable speed- adjustable drilling depth stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 62400 €: 1179.36 €: 4100 mm: 6 mm: 4 mm: 50 mm: 12 1/min: 1.5 °: 20 : 17 to: 1000 mm: 200 mm/s: 15 kW: 200 l: 3 Stk.: 865 mm: 580 mm: 4510 mm: 5230 mm: 2300 mm: 3600 mm: 2150 mm: 11460 kgSwing cut constructionNC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB portMotorized back gauge 1000 mm on ball screws, folding upwardsClear control panel mounted on moveablearmHydraulic hold down pistons are arrangedclose to the cutting edgeFoot switchCentral, manual blade gap adjustmentCutting line illuminationBroad table with ballsPiece counterSingle and continous stokeFold up finger guard 1.000 mm1 squaring arm 1. 500 mm with scale,T-slot and tilting cam2 supporting arms 1.000 mm with T-slotSimple replacement and grinding of thebladesVariable adjustable cuttinglength for economic processingLower blade f ...
x-travel: 1270 mmy-travel: 508 mmz-travel: 635 mmcontrol: Haas total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
2 x BAZ DMG DMU 60T BJ 2000/2002
General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmMax machining diameter320 mmSwing diameter over X linear guideways370 mmClamping chuck Ø210 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (100% DC)13 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)6,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable dat ...
Plate boring mill X/Y/Z 13200/3200/1400, built approx. 2010, rebuilt 2016 Siemens Sinumeric 840D with Siemens drives + Heidenhain linear measuring systems. Linear motors in X with cooling unit Delta Therm, Y/Z ball screw Control cabinet air-conditioned with Pfannenberg cooling unit Hydr. Weight compensation, manually adjustable swivel head SK50 Panel field approx. 12000x3500 With UNION rotary table 2000x1800, adjustment range 1250mm + various clamping angle accessories.
Key data: 1100 mm, 600 mm, 600 mm
Vertical CNC Machining Center Manufacturer: Kaast Type V11L Year of construction 2022 Control Siemens 828 Shop Mill Travel X/Y/Z 1100/600/600mm 24 Way Tool Changer Tool holder SK40 max. speed 10,000 rpm Measuring System Linear Glass Scales Chip conveyor Tool Breakage Control Air and coolant cooling Machine is in a used good condition. For more information, I am always available at 0177 8957069. Machine will be available from March 2026.
Key data: 635 mm, 510 mm, 460 mm
Vertical CNC Machining Center Manufacturer Deckel Maho Type DMC 635V Year of manufacture 2005 Control Siemens 840D ShopMill + memory card Travel X/Y/Z 635/510/460mm Spindle speed max. 8,000 rpm Tool holder SK40 20 Compartment Tool Changer Chip conveyor Clamping area 790 x 560mm 4. Axle manufacturer Lehmann The machine is in top condition, geometry very good. Machine will be available from July 2026. For more information, I am also available at 01778957069 at any time. Whatsapp is also possible.
Key data: 600 , 855 , 750
GROB G350 CNC Machining Center TECHNICAL FEATURES: Year: 2018 NC Type: SIEMENS 840D sl Number of continuous axes: 5 X-axis travel: 600 [mm] Y-axis travel: 855 [mm] Z-axis travel: 750 [mm] X-axis fast feed speed: 70000 [mm/min] Y-axis fast feed speed: 45000 [mm/min] Z-axis fast feed speed: 90000 [mm/min] Maximum weight Tabletop Allowable: 400 [Kg] A-axis angular travel: table angular displacement: -185 / +45 [°] B-axis angular travel: 360 [°] Table surface Ø: 570 [mm] Pin Attachment: HSK-A63 Maximum speed Spindle: 21000 [rpm] Spindle power: 39 [kW] Number of tool magazine stations: 60 Maximum length Tool Size: 365 [mm] Maximum weight per tool: 8 [Kg] Maximum diameter Tool Size: 170 [mm] Rated Current: 61 [A] Installed power: 42 [kVA] Supply voltage: 400 [V] Machine dimensions: 5680 x 3170 [mm] Weight: 15300 [kg] EQUIPMENT INCLUDED: x1 Renishaw OMP60 ...
VIB GmbH & Co.KG
