Manufacturer:
(Category: 101)
The machine is in good technical condition, after prior agreement possible to test. 2 workstation machining center. Workstation 1: 3 axes. Workstation 2: 5 axes. Magazine: 22 tools. Heidenhein control system. Fully functional. type: DBZ X: 2 x 750 (+ 4/5 axis) Y: 500 Z: 600 Worktable 2 × (1000 × 500 mm), 3 T-slots Tool clamping SK 40 DIN 69871 A Renishaw probe adapter on both workstations
The machine is in good technical condition, after prior agreement it is possible to test it. Supported systems MAX4 with WinMax v8 Control language completely in Czech 3D simulation yes Programming type Dialog and NC TABLE Table dimensions 1,500 x 660 mm T-slots 6 x 18 mm Max. table load 1,350 Kg Distance between spindle face and table 150 - 760 mm TRAVELS X axis 1,270 mm Y axis 660 mm Z axis 610 mm A axis 360 SPINDLE Max. spindle speed 12,000 rpm Spindle power 18 kW Torque 237 Nm Spindle taper SK 40 TOOL MAGAZINE Number of tools 40 Max. tool diameter 75 / 125 mm Max. tool weight 7 kg FEED Rapid feed X/Y/Z 30 / 30 / 20 m/min Working feed X/Y/Z 15 m/min OTHER MACHINE DATA Dimensions W x D x H 3,250 x 2,220 x 2,950 mm Weight 9,400 Kg
The machine is in good technical condition, testing is possible by prior arrangement.
The C400 has a robust machine stand, integrated control cabinet and 2200 sliding slides The tables are cast iron and have been finely milled and ground via cnc machining centers Planing width 400 mm Dressing table length 1800 mm Planing shaft 70 mm umd planing shaft 5700 rpm 3 Knife strip planer shaft max. thickness when planing 220 mm min. density 4 mm Carriage 2200 mm Milling machine D 30 mm rpm: 2000-3100-4400-7000 Engine V400/50 3 kw / hp Amplified motor possible 4 kw/ 5.5 hp (not necessary) Weight approx. 800 kg Machine with Hammer Austria
Axles X 160 to infinity Y to max 1300 mm Z up to max 60 mm 6-fold tool changer
Biesse cnc controlled nesting machining center Rover 35 XL Version 2 Electric milling spindle A Electric milling spindle B Drilling unit 28 drilling spindles Working area 6 x 1.55 (1.65) m
Grinding width 1350 mm CE VERSION V400/50 50-Hz Side viewing windows for the grinding units LED Interior Lighting Vacuum table with 4 kW fan fan Infeed and outfeed roller table for long workpieces Tynex structuring unit at the outlet 5.5 kw Structuring brush K46 and pressure roller at the outlet Z-version for RRTC 135 - Pneumatic roller on/off on the calibration unit with steel roller - Pneumatic roller on/off on the fine grinding roller - Pneumatic roller on/off on the TC combination unit - Electronic semented sanding shoe (56mm pitch) - Electronic
The C300 has a robust machine stand, integrated control cabinet and 2200 sliding slides The tables are cast iron and have been finely milled and ground via cnc machining centers The machine can be either 3 or 4 hp / 2.2 kw 3 kw S6 also 3 kw or 4 kw. Planing width 300 mm Dressing table length 1500 mm Planing shaft 70 mm umd planing shaft 5700 rpm 3 Knife strip planer shaft max. thickness when planing 220 mm min. density 4 mm Carriage 2200 mm Milling machine D 30 mm rpm: 2000-3100-4400-7000 Weight approx. 600 kg Machine with Hammer Austria
scm Busellato cnc machining center with console tables Cantilever center with front open beam Drilling unit with 19 tools for vertical and horizontal drilling and in the X direction of the sawing unit Rear and front stops on the consoles Safety system via bumper (without carpets and barriers) Linear tool changer with 11 places on the machine stand Linear tool changer with 14 places on the cantilever (boom) Processing field X Y Z 3115 x 1320 x 180 Throughput in Z 1880 mm JET ELITE P4/13 CE VERSION V 400/50 mobile control element with 7
Tool changer chain, chain magazine, tool changing system, tool magazine -Spare part comes from a BJM machining center type ALBZ-145 -Intake: HSK40 -Tool changing system: CTM42 DO 12P3 400 -CUT changer: CUT42-V-90-60-D VX -RIG changer: RIG 06-12-P003 VX VCP IN DA -Drive engines: MGM -Dimensions: 730/700/H450 mm -Weight: 160kg
Spindles, machining unit, automatic drilling machine, drilling machine, pillar drilling machine Multi-spindle drilling machine -System without control -1x Spindle machining units -2x sleds -Max. feed stroke: 110 mm -Speed: 1400 rpm -Built-in collet: 6 mm -Weight: 350 kg
CONTROLS CNC controls SIEMENS 840 D SL WORKING RANGE -CUBIC- X-axis travel: 600 mm Y-axis travel: 770 mm Z-axis travel: 805 mmSPINDLE / HEAD spindle revolutions (max): 16000 /min tool fixture: HSK A63 drive power: 32 kW spindle torque: 206 NmTOOL MAGAZINE number of positions: 90 AUTOMATIC WORKLOAD EQUIPMENT pallet length: 400 mm pallet width: 400 mm number of pallets: 2 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzATTACHMENTS chip conveyor: yes coolant unit: yes band filtration unit: yes through spindle coolant attachment: yes closed cabin: yes European CE standards: yes Switch-on time: approx. 6,000 hoursSpindle running time: approx. 600 h ...
CONTROLS CNC controls OKUMA OSP-P300MA WORKING RANGE -CUBIC- X-axis travel: 560 mm Y-axis travel: 560 mm Z-axis travel: 625 mmSPINDLE / HEAD spindle revolutions (max): 15000 /minX/Z SLIDE number of tool positions (total): 12 number of live positions: 12 - rotation speeds (max): 5000 /min - drive power: 5.5 kWTOOL MAGAZINE number of positions: 146 AUTOMATIC WORKLOAD EQUIPMENT number of store positions: 2 Workpiece diameter max.: 600 mm worpiece length max.: 900 mm pallet length: 400 mm pallet width: 400 mm number of pallets: 2 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzATTACHMENTS chip conveyor: yes coolant unit: yes through s ...
A complete manufacturing cell with four horizontal machining centers Makino and a pallet storage and transport system is available. Makino A55: Travels X/Y/Z: 560mm/560mm/600mm, pallet dimensions X/Y: 400mm/400mm, max. table load: 500kg, max. workpiece diameter: 630mm, max. workpiece height: 1000mm, rapid traverse: 84m/min. Complete system dimensions: approx. 24000mm/8000mm, weight: approx. 8500kg. The images and videos show an identical system. The configuration of the offered and the illustrated cells is essentially identical. Documentation available. On-site inspection is possible.
Inv. Num. : 8871 Type: Emcomill E 1200 Producer: EMCO Created: 2011 Parameters: Control system: Fanuc Switch-on hours: 28317 h Operating hours: 12114 h Work table length: 1340 mm Work table width: 650 mm Maximum table load (uniform): 1500 kg X-axis travel: 1200 mm Y-axis travel: 610 mm Travel Z axis: 500 mm Machine height: 3060 mm Machine length: 3200 mm Machine width: 3350 mm Machine weight: 10000 kg 2025: New Z-axis motor Spindle overhaul
Inv. Num. : 8870 Type: VTC-200B Producer: MAZAK Created: 1999 Parameters: Control system: Mazatrol PC-Fusion CNC 640 M Work table length: 2820 mm Work table width: 655 mm Maximum table load (uniform): 800 kg X-axis travel: 1120 mm Y-axis travel: 510 mm Travel Z-axis: 510 mm Machine weight: 6000 kg Equipment: Tool probe Workpiece Probe IKZ Chip conveyor
Key data: 110 mm
HBM HWCa-110, new in 1965
- Full enclosure with vacuum extraction- Roller shutter door for crane loading- Pick-Up station for 3 angled milling head - Face machining possible to generously sized areas- Distance spil to table 140 - 740 mm- Pendel screen for splitted manufacturing- Coolant tank filtration 350 Liter- HR410 Handwheel HeidenHain- Double LTA Oil Mist - Flexible, high-precision machining of large and complex parts, with reliable German build quality.
- NC Rotary table 1250 mm with 50 Rpm- Full C-Axis 360.000 with HIGH TORQ Drive- HSK-100 with 90 kW and 15.000 Rpm- 5 Axis simulteneous package- Last service in 2023
- Work piece up to 1530 x 1295 x 3500 Kg- Tool size up to 650 mm length and 30 Kg- Tool size up to 400 x 250 mm and 30 Kg- Extende feed rate up to 15 kN-100% ED- Coolant Filtration - BLUM Laser NT- 3D Quick ser- MPC protection- 3D Measuring probe- DXF Import - Tool package 180 Tool HSK-100A- 2 x Cast iron angle plates 1500 mm - 15000 Working hours- 1e owner machine
x-travel: 450 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mFanuc Oi-MD CNC controlelectronical handwheel24-fold tool changercoolant devicechip conveyorTechnische Daten / technical details:X-Weg / X-travel 450 mmY-Weg / Y-travel 400 mmZ-Weg / Z-travel 400 mmSpindelaufnahme / spindle taper SK40 Drehzahl / spindle speed 15000 UpM /rpmEilgang / rapid feed 36 m/minTischaufspannfläche / table clamping area 770x410 mmWerkzeugwechselmagazinplätze / number of tool places in changer 24 Antriebsleistung Spindel / drive capacity spindle 16 kWGewicht ca. / weight ca. 3500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.The data for this ad was created with ...
x-travel: 2100 mmy-travel: 1020 mmz-travel: 762 mmControl: Fanuc MXP-200FP spindle speed: 6000 U/minspindle capacity: ca. 22 kWmax. torque on the spindle: ca. 550 Nmtool taper: SK 50 table surface area: 2300 x 1020 mmmax. table load: 3000 kgT-slots: 6 x 22 mm T-slot - distance: 150 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m3-Axis CNC Machining CenterEquipment/Accessories:- Automatic tool changer with chain magazine, 40 stations - max. tool-Ø: 120/240 mm - max. tool length: 350 mm- coolant system with internal coolant supply and filter- emulsion mist extraction- electronic handwheel- 2 pcs. magnetic clamping plates 800 x 400 mm- various tool tapers SK50- chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 650 mm, 600 mm, 500 mm
For sale is a Hermle 5-axis machining centre type C30 U (5 simultaneous axes). Equipped with the Heidenhain i TNC 530 controller. The travels of the X, Y and Z axes are 650 x 600 x 500 mm. The table diameter is 280 mm. The machine includes various clamping pallets that can be attached to the table. The maximum speed range is between 20 and 18,000 rpm. The spindle holder is HSK-63. In addition to the standard 32-cavity tool magazine, the machine has an expansion to 157 tool positions, bringing the total number of tool positions to 197. Furthermore, the machine is equipped with a Knoll high-pressure system with a maximum pressure of 40 bar including a fine filter system. A chip conveyor with rear discharge is also available. At the front of the machine is a robotic loading system with a significant number of pallet spaces (depending on the pallet size). This system is connected to the mach ...
Omv 5-Axis Milling Machine Famu ACTIVE Technical specifications Heidenhain CNC Model CNC Version Itnc 530 Tool holder HSK 63 Spindle power 30 Kw Spindle speed 22000 HSC (High Speed) Yes Number of tools 30 X-axis stroke 3000 mm Y-axis stroke 1800 mm Z-axis travel 850 mm Table dimensions 3100 X 1100 mm Roller guides Head type Automatic fourth and fifth axis head Additional technical notes for the B-axis head 360° / +-105° Head with Torque motors Gantry type Gantry with fixed upright moving table Belt chip conveyor Presetting yes Passage between posts 1320 mm Basic Information Brand Famu ACTIVE model Year of construction 2008 Part Number E9BACB Level Machine Standard Size and Weight Length 9700 mm Width 4500 mm Height 4800 mm Weight 27000 Kg
Awea BM-850 vertical machining center Technical specifications Selca CNC Model CNC version S4040DH Tool holder iso 40 Spindle power 11 Kw Spindle Speed 12000 Number of tools 24 X-axis travel 850 mm Y-axis stroke 600 mm Z-axis travel 600 mm Fast feed rates linear axes X Y Z 24 m/min Table dimensions 1050x600 mm Table capacity 850 Kg High refrigerant pressure yes Pressure value 18 bar Screw chip conveyor Basic Information Code 33883A Level Machine Standard Brand Name: Awea Model BM-850 Year of construction 2010 Size and Weight Length 2,500 mm Width 2,200 mm Height 2,600 mm Weight 6500 Kg
travel -x axis: 1.000 mmtravel -y axis: 510 mmtravel -z axis: 480 mmtravel of - x axis (rotary-tilting table): 420 mmtravel - x axis (fixed machine table): 450 mmcontrol: HEIDENHAIN iTNC 530 turning speed range: 50 - 12.000 U/minnumbers of positions in the tool changer: 20 tool taper: SK40 table surface area: 650 x 510 mmworkpiece weight: 300 kgClamping surface of rotary-tilting table: 420 mmworkpiece weight: 200 kgspeeds of rotary table: 30 U/min5-axis machining center | HEDELIUS - RS505 K IC 40/530/450/420/12, equipped with tool changer, ITC, zero-point clamping system and chip conveyor. In addition, the machine features a full enclosure and an extraction system with filter unit.With only 9,787 spindle hours, the unit shows low operating time.The machine is in a well-maintained condition and can be inspected at any time under power.A machine video can be provided on request.Please refe ...
CONTROLS CNC controls MAZAK PC FUSION 640 M WORKING RANGE -CUBIC- X-axis travel: 1700 mm Y-axis travel: 1400 mm Z-axis travel: 1400 mmTABLE - positioning/indexing: 360000 °SPINDLE / HEAD spindle revolutions (max): 10000 /min drive power: 37 kWTOOL MAGAZINE number of positions: 120 AUTOMATIC WORKLOAD EQUIPMENT store type: pallet changer number of store positions: 6 pallet length: 1000 mm pallet width: 1000 mm number of pallets: 6 A high-quality Mazak FH 10800 is available for sale, equipped with a 6-fold pallet storage system, ideal for automated machining processes and high production output. The machine is in very good condition and is available immediately. With a large travel range, powerful spindle and extensive equipment, this horiz ...
Light horizontal machining center model H5000 with control Fanuc 310i more information on request. Machine available immediately.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 59600 €: 1126.44 €: 3100 mm: 10 mm: 6 mm: 50 mm: 13 1/min: 1.5 °: 16 : 22 to: 1000 mm: 200 mm/s: 22 kW: 200 l: 2 Stk.: 865 mm: 580 mm: 3515 mm: 4200 mm: 2250 mm: 3600 mm: 2100 mm: 9300 kgSwing cut constructionNC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB portMotorized back gauge 1000 mm on ball screws, folding upwardsClear control panel mounted on moveablearmHydraulic hold down pistons are arrangedclose to the cutting edgeFoot switchCentral, manual blade gap adjustmentCutting line illuminationBroad table with ballsPiece counterSingle and continous stokeFold up finger guard 1.000 mm1 squaring arm 1. 500 mm with scale,T-slot and tilting cam2 supporting arms 1.000 mm with T-slotSimple replacement and grinding of thebladesVariable adjustable cuttinglength for economic processingLower blade f ...
MISCHI KURT
