Manufacturer:
(Category: 101)
x-travel: 800 mmy-travel: 700 mmz-travel: 550 mmControl: Heidenhain TNC 530 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 800 mm, 600 mm, 500 mm
For sale is a Hermle 5-axis machining centre type C 800U (5 simultaneous axes) with Heidenhain i TNC 530i control. The machine is in good condition and available from stock; Subject to prior sale. The table diameter is 630 mm. The travels in the X, Y and Z directions are 800 x 600 x 500 mm. The machine has a maximum spindle speed of 16,000 rpm and cooling through the spindle with a maximum pressure of 40 bar. The scope of supply also includes a Heidenhain probe, a strong zero-point clamping system and a chip conveyor. The machine is available from stock; Subject to prior sale.
Control Heidenhain TNC 620 Travel X/Y/Z: 350 x 250 x 300 mm Spindle speed 12,000 min-1 Round and swivel table Tool magazine for 20 Wkz. ISO 30 Chip conveyor LANG Automation EcoCompact 10 Approx. 100 tool holders ISO 30
Works well Machine is in Spain Standard configuration with cutting range 2500 × 1550 No. 1 Automatic CNC saw with milling unit and multi-spindle drill head, model MASTERCUT 2500 × 1550, with the following characteristics: Angle of rotation of the saw: ±90° Servo motors: Digital servo motors from YASKAWA Flywheels: Ø 800 mm made of cast iron Cleaning systems for the flywheels Saw Position Sensor Suction nozzle: Ø 150 mm Compressed air requirement: 6–7 bar Self-braking motor for the flywheels: 7.5 kW Automatic lubrication of all components Pneumatic Tensioning of Flywheels Maximum cutting length: 2500 mm Maximum cutting width: 1550 mm Maximum cutting height: 0–150 mm Minimum cutting radius (depending on the saw blade): 65 mm with 13 mm saw blade Dimensions of the saw blade: 5,450 × 13 × 0.6 mm or 5,450 × 16 × 0.8 mm ...
x-travel: 635 mmy-travel: 510 mmz-travel: 460 mmtable surface area: 790 x 560 mmspindle taper: SK 40 spindle turning speed - stepless: 20 - 12.000 U/minspindle drive: 13 kWmax. torque on the spindle: 83 Nmfeeds x/y/z -stepless: bis 20.000 mm/minrapid traverse: 30 m/minATC: 20 Pos.tool diameter if 2 vacant positions: 130 mmtool diametre at full load: 80 mmtool length - max.: 300 mmweight of tools max.: 6 kginternal coolant system feed: 12 barcontrol: HEIDENHAIN, TNC 620 total power requirement: 17 kVAweight of the machine ca.: 3,9 tdimensions of machine L x W x H: 3,0 x 1,92 x 2,35 mAccessories: probe HEIDENHAIN, TS 460, electron. hand panel, chip conveyor, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1100 mmy-travel: 600 mmz-travel: 510 mmtotal power requirement: 30 kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: 4400 x 2250 x 2920 mmWorking area:X-axis travel: 1100 mmY-axis travel: 600 mmZ-axis travel: 510 mmRapid traverse: 32 m/minWorktable: 1300 x 600 mmT-slots: 6, size 18, 100 mm spacingMax. table load: 1000 kgDistance from column to spindle center: 600 mmSpindle: 60 - 12000 rpmDrive power: 10/17 kWSpindle taper: ISO 40 / DIN 69871AMagazine: 32 positionsMax. tool weight 8 kgMax. tool length 300 mmMax. tool diameter 76/127 mmTool change time 2.5 secSpace requirements:Length x Width x Height 4400 x 2250 x 2920 mmWeight 8500 kgEquipment and accessories:Heidehain iTNC 530 CNC controlInternal coolant system (IKZ): 20 barCoolant tank: 480 lChip conveyorHeidenhain glass scales in X/Y/ZThe data for this ad was created with ModulMWS - the software solution of Lo ...
x-travel: 2800 mmy-travel: 2200 mmz-travel: 800 mmControl: Heidenhain iTNC 530 table surface area: 3000 x 1200 mmtool taper: HSK-A-63 spindle turning speed range: 12000 U/minpower capacity: 18 kWfeed range: 35000 mm/mintotal power requirement: 68,7 kWweight of the machine ca.: tdimensions of the machine ca.: 12,4 x 3,5 x 4,6 mThe FPT DINO is a 5-axis portal milling machine designed for the precise machining of large components.With a cross travel of 2200 mm and a high-speed spindle with 12,000 rpm, this machine combines high machining volume with outstanding dynamics in finishing.Heidenhain iTNC 530 CNC path controlNumber of controlled axes (simultaneously): X/Y/Z/C/BTravels:X-axis (longitudinal travel) 2800 mmY-axis (cross travel) 2200 mmZ-axis (vertical travel) 800 mmMachine length: 12,434 mmMachine width: 3,597 mmMachine height: 4,622 mmCoolant equipment (no coolant through spindle)C ...
The machine is in good technical condition, testing possible after prior agreement. 3 AXES, Heidenhain ITNC 530 control system.
Cross table, cross-sliding table, clamping table, clamping plate with T-slots, clamping angle -Cross table for lid type: KF12 -Table surface: 400 x 400 mm -Travel path: x 50 mm/y 65 mm -Weight: 60 kg
Key data: 762 , 508 , 508
HAAS UMC-750SS Machining Center TECHNICAL FEATURES: Year: 2019 Number of continuous axes: 5 X-axis stroke: 762 [mm] Y-axis travel: 508 [mm] Z-axis travel: 508 [mm] C-axis angular travel: 360 [°] Table dimensions: Ø630 x 500 [mm] Maximum weight Tabletop Allowance: 300 [Kg] B-axis angular travel: +110 [°] / 350 [°] Pin Attachment: CT 40 Maximum speed Spindle: 15000 [rpm] Spindle power: 22.4 [kW] Number of tool magazine stations: 40 Capacity of the garden tray: 284 [l] Number of hours in operation: 5277 [h] EQUIPMENT INCLUDED: x1 Center-Spindle Watering x1 High Pressure Coolant Pump 21 [bar] x1 RENISHAW Wireless Coin Probe x1 Calibration Sphere x1 RENISHAW Tool Probe x1 HAAS Oil Mist Vacuum x1 HAAS offset crank x1 HENNIG Chip Conveyor Type 101435 Machine visible under tension for testing at our premises, by appointment. Price excl. VAT on request, ...
Indexing dividing setting:1e stage full rotation setting 5 Gr. 2e stage full rotation (fine) 30 Turning rotation setting:1e stage 1 - 48 Rpm2e stage 0,27 - 11 Rpm V-Axis movement setting:1e stage 10 mm2e stage (fine) 0,02 mm Scraped guide way 1 size: 300 x 85 mm Scraped guide way 2 size: 225 x 85 mmScraped guideway 3 size: 250 x 85 mm
spindle diameter: 160 mmx-travel: 10500 mmy-travel: 4000 mmspindle taper: ISO 50 z-travel: 950 mmturning speeds: 3,15-1000 U/mintransmission ratio: 4 spindle power: 58 kWSupport sleeve: 340x400 mmw-travel: 900 mmFeed: x 0,12-9600 mm/UFeed: y/z/w 0,1-5600 mm/UPlate area: 39,5 m²Plate: 5400x3500 mmPlate: 5900x3500 mmT-slot - distance: 365 mmT-slots: 35/75 mmThickness of the plate: 360 Control: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, p ...
A defective vertical CNC machining center DMG Mori is available. Travel X/Y/Z: 835mm/510mm/510mm, tool stations: 20, tool holder: SK40, speed: 10000rpm, table dimensions X/Y: 1000mm/560mm, T-slot spacing: 100mm, max. table load: 800kg, table height: 720mm. Control: Heidenhain TNC 530, operating hours: approx. 29836h. Either the pneumatic release cylinder or the spindle is defective. Documentation available. On-site inspection is possible.
A universal machining center is offered with control: Heidenhain TNC 426. Operating hours: approx. 45380h, spindle hours: approx. 14384h. Viewing possible by appointment.
x-travel: 1270 mmy-travel: 670 mmz-travel: 625 mmCNC-control: SIEMENS 828 D table-size: 1300 x 670 mmmax. table load: 1000 kgspindle taper ISO: SK 40 spindle turning speed range: 12000 U/minfeed stepless: 8000 mm/minrapid traverse: 36 / 36 / 30 m/mindrive capacity - spindle motor: 18,5 kWtool change unit: 30 Pos.total power requirement: 40 kVAweight of the machine ca.: 8,5 tdimensions of the machine ca.: 3,20 x 2,45 x 2,40 mchip conveyor: 4,10 x 0,65 x 1,50 coolant: 3,60 x 2,20 x 0,80 m- Siemens 828D CNC control- Direct drive spindle: 12,000 rpm- Two-contact clamping system in the BIG-PLUS spindle (SK40 spindle taper)- Oil cooling of the spindle head- Thermal compensation system (software)- Tool magazine: 30 tools- RENISHAW tool and workpiece probe- Internal cooling via the spindle centre: 12 bar- External cooling with air and cooling lubricant- Internal thread spindles + chip conveyor b ...
Key data: 600 mm, 750 mm, 805 mm
Full working, perfect condition machine for sale! 5-axis simultaneous HEIDENHAIN iTNC 530 controller spindle HSK-A 63, 16,000 min-1, 159/206 Nm, 25/32 kW - Spindle -> 4200 working hours (almost new!) - Axes -> 16800 working hours tool magazine HSK-A 63 with 34 tools stations additional side tool magazine TM99 with 99 tools stations remote controller HEIDENHAIN KinematicOpt DCM Collision (HEIDENHAIN) job InfraRed touchprobe with HEIDENHAIN software high pressure through the spindle cooling system (38 bar) Ibjbexpf Hfspw Rc Exjf pressure blow through the spindle chamber mist extractor Tool cleaning system Chip (Swarf) Convoyeur oil skimmer for coolant tank coolant gun coolant washdown for chamber remote machine diagnostic (via network) Voltage 400 V, 50 Hz, TN-S Machine is located in production facility in Mielec 39-300, Poland, connected and a ...
CHIRON FZ08 KS Magnum High Speed Plus (HSP) High-Speed Machining Center (HSP) TECHNICAL FEATURES: Year: 2006 NC Type: FANUC 18i-MB5 Number of axes: 7 X-axis travel: 450 [mm] Y-axis travel: 270 [mm] Z-axis travel: 310 [mm] X, Y and Z fast travel speed: 75000 [mm/min] Maximum diameter in bar turning spindle: 32 [mm] Maximum speed Turning spindle: 8000 [rpm] Maximum power turning spindle: 12 [kW] A-axis angular travel: 360 [°] A-axis indexing accuracy: 0.001 [°] B-axis angular travel: -20° / +115 [°] B-axis indexing accuracy: 0.001 [°] Pin Attachment: HSK40 Maximum speed Spindle: 30000 [rpm] Number of tool magazine stations: 40 Turning part by robot (6th side machining): Yes RS232 Port: Yes Installed power: 17 [kVA] Supply voltage: 400 [V] Operating hours: 9911 [h] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW p ...
arm length: 1600 mmtool adaptor: ja fabric-no.: 9787 weight: 4,6 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A CNC vertical long-bed machining center Mazak is available. Travel X/Y/Z: 3000mm/800mm/720mm, B-axis: 110°, C-axis: 360°, table diameter: 600mm, long-bed table dimensions X/Y: 3500mm/820mm, max. table load: 2500kg, spindle interface: BT40, speed: 18000rpm, rapid traverse: 50m/min, tool stations: 48, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5250mm/3650mm/3200mm, weight: approx. 16100kg, control: Mazatrol Matrix 2, spindle hours: 18502h. Including rotary table Nikken CNC 601MA, high-pressure coolant, center partition wall, Renishaw probe, touch probe RMP 60Q, CAD/CAM software Topsolid 7.18 and postprocessor. Documentation available. An on-site inspection is possible.
spindle diameter: 150 mmx-travel: 9000 mmy-travel: 5000 mmControl: FANUC 31i-B spindle taper ISO: 50 dimension of the ram: 400 x 400 mmz-travel: 1200 mmw-axis: 1000 mmnumber of spindle speeds: 1 - 3000 U/minmain drive motor: 71 kWrotary table:: table surface area: 2500 x 3000 mmtable load: 30 tV-axis: 2500 mmb-axis: 0,0001 / 360 °feeds x/y/z -stepless: 0,5 -20000 / 15000 mm/mintotal power requirement: - kVAweight of the machine ca.: - tEquipped with:- FANUC 31i-B CNC control- 2-axis milling head 0-360° / +/- 95°- 60-position tool changer (ISO 50)- Skoda TDV 30 NC boring mill table (2500 x 3000 mm, 30 t)- Coolant system with paper belt filter- Hydrostatic guides on all axes- Tool management- Renishaw RMP 60 workpiece measurement- AAC station for 4+1 heads-- IFW 12 C-E angle milling head, 1° head rotation, external cooling, 25kW, 3000rpm-- IFVW 101 C-E angle milling head, 1° head rot ...
spindle diameter: 150 mmx-travel: 14000 mmy-travel: 5000 mmControl: FANUC 31i-B spindle taper ISO: 50 dimension of the ram: 400 x 400 mmz-travel: 1200 mmw-axis: 1000 mmnumber of spindle speeds: 1 - 3000 U/minmain drive motor: 71 kWrotary table:: 2 Stcktable surface area: 4000 x 4000 mmtable load: 70 tV-axis: 2500 mmb-axis: 0,0001 / 360 °feeds x/y/z -stepless: 0,5 -20000 / 15000 mm/mintotal power requirement: - kVAweight of the machine ca.: - tEquipped with:- FANUC 31i-B CNC control- 2-axis milling head 0-360° / +/- 95°- 60-position tool changer (ISO 50)- 2x pcs Skoda TDV 70L NC boring mill table (4000 x 4000 mm, 70t)- Coolant system with paper belt filter- Hydrostatic guides on all axes- Tool management- Renishaw RMP 60 workpiece measurement- AAC station for 4+1 heads-- IFW 12 C-E angle milling head, 1° head rotation, external cooling, 25kW,3000rpm-- IFVW 101 C-E angle milling head, ...
x-travel: 3.400 mmy-travel: 3.400 mmz-travel: 1.600 mmControl: CELOS 840D sl Op SiemensMain spindle:: max. spindle speed: 20 - 15.000 min/-1power capacity - main spindel: 52 / 42 kWtool taper: HSK-A100 max. Torque: 404 / 280 Nmswivellable: B: -30° / +180 °NC-Rotary table:: table diameter: 2.500 x 2.000 mmmax. table load: 10.000 kgtable speed: 5 min/-1distance spindle center to table: hor.: 130 - 1.730 mmdistance spindle center to table: vert.: 230 - 1.830 mmdistance spindle nose and table: hor.: -1.500 - 1.900 mmdistance spindle nose and table: vert.: -1.600 - 1.800 mmTool-Presetter:: type: 5x Rad- / Wheel number of toolpositions: 303 pos.max. tool diameter: 110 mmmax. tool-dia with free toolbox: 280 mmmax. tool length: 900 mmmax. tool weight: 45 kgtool changing time: 7,5 sectool taper: HSK-A100 feeds:: rapid traverse: 60 / 30 / 40 m/mintotal power requirement: 140 kVAweight of the ...
The Mazak VTC 800 series is a line of powerful, large-format 5-axis turning centers for large workpieces, known for their high precision and rigidity, ideal for aerospace, energy and heavy machinery, with functions such as integrated spindles, fast tool change, and for efficient complete processing. Accessories/Options:, Tool magazine for 30 tools, Tool length measurement, tool breakage detection, Factory-installed preparation for chip conveyor (left), Magazine (HSK) for 155 tools, Air blower at the workpiece, Signal light (end of machining: yellow), Additional: Work area lighting, Coolant gun, Air blower through the spindle, 70 bar preparation, including interface for high-pressure system, Automatic opening/closing of the operator door, Mazak Monitoring System B RMP 60 (only/H/V), Collision monitoring by Brankamp, 2 Renishaw TS27R tool presetting devices, NC rotary table, Holding device ...
Stanko 2M55 Mk5Admission in drilling-spindle (morse): Mk5 Max drilling capacity: 50 mm Base dimensions (1) Table dim (2) : 1650 x 830 mm Longitudinal travel drilling-head (X-axis): 1375 mm Height-travel arm (Y-axis): 1200 mm Max dist.round column -- drillingspindle: 1600 mm Speeds: 20 -> 2000 rpm Power on the spindle: 4.5 kW Cooling system: 4,7 ton
2000 Toshiba BTD-200QF CNC Horizontal Boring Mill Spindle Diameter: 4.33" Extended Quill Diameter: 7.87" Taper In Spindle: #50 Vertical Head Travel, Y-Axis: 39.37" Table Cross Travel, X-Axis: 39.37" Spindle Travel, Z-Axis: 15.74" Saddle Travel, W-Axis: 27.55" Table Size, (2) Pallets: 39.37" x 39.37" Table Capacity: 6,000 lbs Table Indexing: 0.001 Degree Rapid Traverse (X,Y,Z Axes): 472.4 IPM Feed Rates: .04-236.2 IPM Table Load Capacity: 6,600 LBS Spindle Speeds (2 Ranges): 20-3000 RPM Floor Space, L x W x H: 173" x 174" X 126" Machine Weight: 39,600 lbs. -EQUIPPED WITH- Tosnuc 888 CNC Controls 40-Station Automatic Tool Changer (2) 39.37" x 39.37" Pallets with Pallet Shuttle System Thru Spindle Coolant Marposs Probing System Chip Conveyor 30 HP Spindle Motor
Control: OSP-P 300S X-axis: 695 mm Y-axis with stroke: +150/ -150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° C-axis: 360°, positioning in 0.001° Turning diameter: 650 mm Turning length: 1,500 mm Mount: Capto C6 Total tool positions: 80 Accessories: NC Tailstock Movable hydraulic steady rest AX 5 on NC axis Coolant system with belt flow filter hydraulic 3-jaw chuck Kitagawa BB 212-11 automatic touchsetter High-pressure cooling IKZ High Cut Pro software option (High Accuracy Package with Super Nurbs) CAS Collision Prevention System Spindle orientation main spindle, electric Multi-tool including rotation function for Y-axis Helix function Automatic main power shutdown DNC-DT interface Machining Navi M-i (milling), speed control to minimize vibrations. One-Touch IGF Chip conveyor
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve, 2 pieces -Type: MK3/4 adapter -Price/Fee: complete -Transport dimensions: 245/100/H50 mm -Total weight: 3 kg
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Morse taper sleeve: taper reducing sleeve -Type: CM5/4 STAS2293-65 -Dimensions: Ø 45 x 135 mm -Weight: 0.9 kg
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Morse taper sleeve: taper reducing sleeve -Type: STAS2293-65M-80/5 -Outer diameter: 80 mm -Inside: MK5 Ø mount, see photos -Overall dimensions: Ø 80 x 205 mm -Weight: 5 kg
x-travel: 4500 mmy-travel: 800 mmz-travel: 600 mmcontrol: HEIDENHAIN iTNC 530rapid traverse: 30/40/40 m/mintable surface area: 5300 x 750 mmtable load: 4,5 ttool taper: DIN 69871-A40 turning speeds: 30 - 6000 U/minspindle motor: 29 kWspindle distance: 325 - 925 mmtool piece magazine with: 30 Plätzentotal power requirement: kWweight of the machine ca.: ca. 20 tdimensions of the machine ca.: mequipped with:- CNC-Control Heidenhain iTNC 530- IKZ 20 bar- NC Swivable Table- Chip Conveyor- Coolant- Tool Changer 30-fold (SK 40)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
desba Trading
