subcategories
(3rd category level)
Manufacturer:
(Category: 107)
Punching force: 550 kN (e.g. punches 30 m in 16 mm material), with search device via foot switch for punching Cuts 350 x 13 mm or 230 mm on the flat steel shear Projection: 305 mm Two separate footswitches for the punching and shearing side, so punching and shearing can be done independently Support table on the punching side Range of tools is included in the price
GEKA HYDRACROP 55/S hydraulic ironworker machine built in 2008 in Spain, is a highly versatile and multifunctional machine that allows a wide range of workpiece machining. Its rigid, sturdy structure is equipped with 5 work stations, designed for the precise hole and corner punching, as well as shearing flat bars, angle bars and solid bars. Each work station is controlled by two hydraulic cylinders, which provide the possibility to work independently or in parallel on two stations simultaneously. The GEKA HYD 55/S ironworker machine weighs 1390 kg. Technical data of the GEKA HYDRACROP 55/S 2-cylinder ironworker machine General data - punching force: 55 t - cutting force: 110 t - number of workstations: 5 - number of hydraulic cylinders: 2 - engine power: 5 kW - weight of machine: 1390 kg Flat bar shearing station - flat bar dimensions: 300 x 15 mm; 200 x 20 mm - blade leng ...
Max. sheet thickness: 6 mm steel Adjustable angle 30-120 degrees Knife length: 200 mm Knife sharpened Weight: approx. 1,200 kg
Folding machine good condition, ready for immediate use. For details, please refer to the nameplate
plate thickness: 6,0 mm STplate thickness: 4,0 mm VAtable-size: 780 x 1000 mmblade length: 200 x 200 mmstrokes per minute: 60 minengine output: 3 kWweight of the machine ca.: 1100 kgdimensions of the machine ca.: 1400 x 800 x 1300 mmFurnishing:- electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels- front panel- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- 2x staking stops with movable and interchangeable stop bars- lateral clippings ejection- free-moving footswitch- Operation manual Machine link :http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9397092The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 7381 Type:- Producer: Jorns Generated: Parameters: Maximum sheet thickness when cutting: 3 mm Maximum sheet metal plate width: 1250 mm Max. the weight of the scroll: 6000 kg
Key data: 1000 mm
with foldable X-frame Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 1000 mm Sheet thickness steel: 0.8 mm Sheet thickness aluminum: 1.0 mm Sheet thickness front: 0.5 mm Colour: blue Dimensions: 1240 x 692 x 1150 mm Machine weight: 38 kg without roller scissors Opening width: 45 mm Bending Angle: 150 degrees Machine number: TB 3482
3000 x 1500mm 5000w With auto pallet changer & LiftMaster
Plasma cutting model SLIMCUT PLUS Plasma Plus brand Purchased in 2021 complete with CEBORA Sound PC130/T generator.
plate thickness: 1,25 mmthroat: 130 mmroll diameter: mmtotal power requirement: 0,75 kWweight of the machine ca.: 180 kgdimensions of the machine ca.: 1,1 x 0,6 x 1,2 mFlanging machine is equipped with:- Emergency switch- Footswitch- 8 pcs. Roll setsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 4,0 mm STplate thickness: 3,0 mm VAtable-size: 800 x 800 mmblade length: 250 x 250 mmstrokes per minute: ca. 55 minengine output: 4 kWweight of the machine ca.: 800 kgdimensions of the machine ca.: 1300 x 1300 x 1300 mmFurnishing:- electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels- front panel- Plexiglas protection for better transparency- hardened knives also for cutting stainless steel- planed table surface to avoid tilting or slipping of the metal sheet- 2x staking stops with movable and interchangeable stop bars- lateral clippings ejection- free-moving footswitch- Operation manual Machine link :http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9397092The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 3000 mm, 12 mm, 1000 mm
Max. cutting length: 3000 mm Max. sheet thickness: 12 mm steel Controlled backgauge up to 1000 mm Cutting length limitation Cut edge lighting Light barriers for the rear area Spare blade Weight approx. 9000 kg
BEYELER PR6 ROBOT 60 X 2550 MM CNC press brake was built in 2001 in Germany. This extremely powerful and reliable machine is used for precision bending of workpieces with a maximum length of 2550 mm. The sturdy construction in combination with a press force of 60 tonnes and a perfectly optimised CNC control makes the machine ideal for a wide variety of applications in unit and series production. The BEYELER PR6 Robot press brake weighs 7200 kg. Technical specifications of the BEYELER PR6 ROBOT 60 X 2550 MM press brake - CNC control - press force: 60 t (600 kN) - maximum bending length: 2550 mm - bending speed: 1-10 mm/s - return speed: 200 mm/s - slider stroke: 265 mm - maximum response time: 110 ms - minimum safety distance: 350 mm - motor power: 5.5 kW - maximum air pressure: 8 bar - power supply: 3x 400 V; 50 Hz - dimensions (L x W x H): 3000 x 2100 x 2700 mm - weight ...
Offer 24206 Specifications: - Max. working width 2030 mm - Max. material thickness at 40 kg/mm² strength 1.25 mm - Backgauge - Space requirement approx. W 2250 x H 1050 x D 750 mm - Weight approx. 700 kg
Offer 24194 Specifications: - Max. working width 2040 mm - Max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - Bending angle lockable with end stop - Upper beam is operated with side hand crank - Max. stroke upper beam 85 mm - Max. adjustment bending beam 80 mm - Bending process is supported by eccentric weight - Space requirement approx. W 3250 x H 1250 x D 450 mm - Weight approx. 1620 kg
for sheet thickness up to: 8 mm Flat Plate: 80 x 12 mm Square bar: 20 mm Round bar: 18 mm Weight approx.: 88 kg Dimensions: 620 x 250 x 380/880 mm high (with/without base)
used
Gr. working width: 1520 mm for sheet metal up to: 1.5 mm Opening width upper beam: 220 mm Adjustability bending beam: 60 mm Weight: approx. 450 kg Space requirement: 2150 x 430 x 1500 mm
used
Key data: 200 mm, 1 mm, 200 mm
Sell here an electric Schechtll bending bench with 6-way control and a matching 2m hand-held guillotine shears. Price net, you will receive an invoice with VAT.
used
Key data: 2000 mm, 1 mm, 2000 mm
Electric bending machine Schechtl 2000x1.25mm with 6-way control, in good condition. The machine can be loaded with a forklift. You will receive a proper invoice with VAT, price net 6900.-. Shipping possible throughout Europe. Please call us or send us a wading app.
sheet width - max.: 0350 mmcoil weight: 2,00 tcoil internal dia.: 470 - 530 mmcoil outside - diam. ca.: 1500 mmtotal power requirement: 1,0 kWweight of the machine ca.: 1,50 tdimensions of the machine ca.: 1,30 x 1,6 x 1,90 mmotor-driven, with manual central spreadingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width - max.: 0360 mmcoil weight: 3,00 tcoil internal dia.: 380 - 520 mmcoil outside - diam. ca.: 1500 mmtotal power requirement: kWweight of the machine ca.: 1,40 tdimensions of the machine ca.: 1,80 x 1,80 x 1,70 mwith infinitely variable drive, hydraulic centralized expansion, coil loop control via contact plateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The SUPERA-3015 A laser cutting machine is a general purpose type with fiber laser. It offers high dynamics in high-speed cutting of thin sheet metal, and they have the technology and know-how on board to produce stable and consistent parts even for thicker material, where the maximum thickness is limited only by the output power of the laser. Standard equipment A SUPERA 3015 comes with the following standard equipment: An automatic changing table for an almost continuous cutting process Two cutting tables with grid support Boxes for scrap and dust removal under the working area of the machine KEBA – LTI control with practically unlimited program memory Integrated laser pulse generator 21.5" touch screen operator panel with graphical user interface Mouse and keyboard Cutting head for fiber laser source Automatic selection of gas valve to ...
Key data: 250 mm, 1 t, 1200 mm
Sheet thickness max. 2 mm Largest belt width 250 mm Coil Outer Diameter 1200 mm Coil inner diameter 430 -550 mm Max. coil weight 2 x 1600 kg
Compact hydraulic guillotine shears, ideal for metal and container construction. The generous support arms and the table with integrated rollers make the alignment and machining of large workpieces precise and easy. It is operated via a foot pedal, which frees up the hands to align the workpiece. Specifications: Cutting length: 1320 mm Sheet thickness: 3.5 mm Strokes / min: 35 - 47 Number of hold-down devices: 9 Pressure hold-down: 2.5 t Front support arms: 1000 mm Back gauge: 600 mm Cutting angle: 1/2 - 2° Motor power: 5.5 kW Equipment: - High-quality, high-alloy scissor blades with a high chromium content - 2-fluted upper blade, 4-fluted lower blade - Hydraulic cutting angle adjustment - Manual cutting gap adjustment (from 4.5 mm) - Generous support arms with adjustable stop - Side stop with double scale - Feeder work table with ball rollers - Full-length front ...
Key data: 3000 mm, 3 mm
with automatic hold-down device POS 100 E Control for Motorized Backgauge Single-angle stop 2 front support arms adjustable on linear rail Manual cutting gap adjustment 0.5 - 3 mm a sheet metal transport and stacking device is attached under the fence for transporting and depositing the cuttings Compressed air connection required Security fencing and light barrier available Adjustable back gauge 8 - 1000 mm Colour: grey/blue Total power requirement: 32 A with cutting gap adjustment without cutting angle adjustment Power: 3000x3.0 mm, 4.0 mm aluminum, 1.5 mm stainless steel Dimensions: 4000 x 1600 mm Weight: 4000 kg Machine number: 200034 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.
Key data: 4040 mm, 2 mm
Motorized guillotine shears, with front-adjustable handle, sheet metal depositing to the front Sheet width: 4040 mm Sheet thickness steel: 2.5 mm Sheet thickness aluminum: 4.0 mm Sheet thickness stainless steel 1.5 mm Colour :grey/blue: Total power requirement :32 A Machine weight :3350 kg Dimensions: 4585 x 2592 x 14300 Cutting gap adjustment: manual Automatic hold-down Angle stop :1000 mm Cutting angle: > 1.11 degrees Adjustable back gauge: 0 - 750 mm
plate length: 1550 mmplate thickness: 3,5 mmnumber of rolls: 3 roll diameter: 120 mmtotal power requirement: 2,2 kWweight of the machine ca.: 750 Kgdimensions of the machine ca.: 2,2 x 1,5 x 1,6 mElectrically operated round roller via foot lever,Sturdy, welded construction stand,Rear roller adjustable for conical bending,Rollers are hardened,Top roller can be swivelled to remove the workpiece.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1000 mm, 1 t
for one-sided loading and unloading, with large stop plate and brake Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 1000 mm Coil weight: 1000 kg Machine Number: 308 Colour: blue/yellow Machine weight approx.: 350 kg Dimensions: 800 x 1800 x 1400 mm Coil width: 1000 mm Clamping range: up to 510 mm Load capacity in kg :1000 kg
new ultra-light construction site roll forming machine for double standing seam, with dismountable sides, 2 modules can be used for underfunding, as well as another Tool set for the production of double-sided overlays, so ferves can be used can be manufactured in a single pass (additional tool sets are an option), Sheet width: 720 mm Sheet thickness steel: 0.65 mm Sheet thickness aluminum: 0.8 mm Machine weight: 157 kg Dimensions: 1200 x 1400 x 560 mm Total power requirement: 220 V Colour: turquoise/white Profile height: 25 mm it Width adjustment Roll forming speed: 9 m/min
new standing seam roll forming machine, without length measuring device, without cross shear, emergency stop switch, 7 stations, Sheet width: 250 - 700 mm Sheet thickness steel: 0.7 mm Sheet thickness aluminium 0.8: mm Sheet thickness stainless steel 0.5 mm Machine weight :190 kg Dimensions: 1200 x 900 x 580 mm Total power requirement: 220 V Colour: grey Profile height: 25 mm with width adjustment Infeed width: 250 - 700 mm Roll forming speed: 9 m/min
