used Sheet Metal Deburring Machines for sale

Description: Brush deburring machine Brush dimensions 200 x 45 x 50.8mm 2 speed levels Brush diameter 200 mm Workpiece length 90 mm Workpiece width 90 mm Supply voltage 400 V Speeds 1450/2850 rpm Total power requirement 1,0 kWdimensions (l x w x h) approx.: 390 x 310 x 390 mm, weight approx.: 25 kg

frequency: 50 Hzvoltage: 400 VWorkpiece thickness max.: 1-70 mmweight of the machine ca.: 6 tdimensions of the machine ca.: 3,20x2,90x1,90 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sheet metal deburring machine Manufacturer: ERNST Type: EM5/N900 Year of construction: 1999 Control type: conventional Working width: 880 mm Workpiece height: 1-70 mm Grinding drum diameter: 420 mm Machine weight approx.: 2,800 kg Dimensions approx.: 2,500 x 1,715 x1,675 mm automatic sheet metal deburring machine working in wet grinding process automatic magnetic filter system Wet sanding device Washing and drying facilities Maglev width: 200 mm Minimum length of small parts: 80 mm

plate thickness: 10,0 mmturning speed range: 1400 U/mindiameter of brush: 250 mmwidth of brush: 50,0 mmvoltage: 380 Volttotal power requirement: 0,55 kWweight of the machine ca.: 70,0 kgdimensions of the machine ca.: 460 x 500 x 1400 mmDescription :HM ZA 250 was specially designed for fast and reliabledeveloped for deburring straight sheet metal.Furnishing:- efficient deburring of straight sheets- for steel, stainless steel, non-ferrous metals- Machine base, mobile- Suction with dust bagThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: DIM.-MM = 250 x 50, Nr. 1999-595249dimensions (l x w x h) approx.: 800 x 600 x 700 mm, weight approx.: 70 kg

working width: 1000 mmworkpiece width - max.: 0,5 - 50 mmsandingbelt width: -- mmweight of the machine ca.: 2,5 tWith the SBM-L 1000 G1S2, which works in the dry process, in alternating operationSteel, stainless steel and aluminum can be machined. She deburrs and roundsthe edges on the outer and inner contours of punched, laser, fine plasma orwater jet cut workpieces with a thickness of up to 50 mmon both sides in just one operation. Two sanding units, 1 each on the top and bottom, remove spatterand slight burrs on outside and inside edges of sheet metal. A total of four sanding belts, 2 each on the top and bottomUnderside, process the sheets on both sides at the same time. hereAll edges are softened or rounded, depending on the tool settings. Machining on both sides saves time-consuming turning of the workpieces andedit twice. All pairs of aggregates can be switched on/off separately de ...

working width: 950 mmworkpiece width - max.: 1,0 - 50 mmsandingbelt width: 970 mmsandingbelt length: 1900 mmweight of the machine ca.: 1,8 tThe SMD 123 RE is a universal entry-level machine for all-round deburringUniform edge rounding and surface grinding of sheet metaldry process. Suitable for processing steel, stainless steel and aluminium. The non-slip conveyor belt enables safe transport and theMachining even of small workpieces. The two rotor heads ensure an all-round uniformEdge rounding and a directionless finish. The intuitive operation via touch panel allows every employeeget to grips with the machine quickly. The SMD 1 models are installed and ready for operation in a short time. The compact design saves valuable production space. Low acquisition and operating costs lead to shortamortization periods and guarantee economical processing of yourworkpieces.consisting of:- Grinding  ...

Description: - Operating voltage: 230 V - Frequency: 50/60 Hz - Speed: 30000 rpm - Table dimensions: 250 x 250 mmdimensions (l x w x h) approx.: 300 x 250 x 300 mm, weight approx.: 30 kg

Description: deburring machine Speed 1500/3000rpm Roller diameter max. 250mm Motor 2.0 / 3.0KW see picturesdimensions (l x w x h) approx.: 800 x 600 x 1,200 mm, weight approx.: 170 kg

diameter: -- mmworkpiece length: -- mmwork piece width: 0 - 20 mmspeeds: 2850 U/minrange of angles: 0 - 60 (stufenlos) °weight of the machine ca.: 19,5 kgMaximum chamfer width 20 mm + face machiningDesigned for chamfering and deburring straight edges, for theso-called FACING - removing an unwanted layer of material on theFront side of the workpiece, which is created, for example, by flame cutting a sheet metal.Specially developed for the production of visible chamfers andweld preparations. Powerful electric drive for extremeCharges. High performance motor stepless adjustment of the working angle in the range of 0° - 60° FACING - Edge processing at an angle of 0° to remove unwanted onesLayers of material after flame cutting The unique mechanical scale to adjust the bevel width for higherprecision A very compact and ergonomic design for high work productivity Circumferential protective ...

diameter: -- mmworkpiece length: -- mmwork piece width: 12 mmrange of angles: 30/45/22,5/37,5/50 °weight of the machine ca.: 30 kgChamfering system UZ12 ULTRALIGHT - KIT 30° + 45°Maximum bevel width 12 mm with automatic feedThe UZ12 ULTRALIGHT is one of the lightest automatic beveling machinesadvance in the market. Thanks to its compact size and light weightit is not only suitable for workshops, but also for assemblies. TheMachine is equipped with the automatic feed and therefore does thisWorking with the UZ12 ULTRALIGHT very comfortably. For conventional steel (up to 600 MPA/87022 PSI strength),Brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm Application range of sheet thickness 3 - 35 mm Beveling of pipes from an inner diameter of 95 mm Variable setting of the desired bevel using an exchangeable holder kitfor any given angl ...

diameter: -- mmworkpiece length: -- mmwork piece width: 15 mmrange of angles: 15-50 °plate thickness: 6-40 mmtotal power requirement: 1,5 kWFeed speed: 3,5 m/min.dimensions: 530 x 395 x 860 mmweight of the machine ca.: 94 kgChamfering system UZ12 ULTRALIGHT - KIT 30° + 45°Maximum bevel width 12 mm with automatic feedThe UZ12 ULTRALIGHT is one of the lightest automatic beveling machinesadvance in the market. Thanks to its compact size and light weightit is not only suitable for workshops, but also for assemblies. TheMachine is equipped with the automatic feed and therefore does thisWorking with the UZ12 ULTRALIGHT very comfortably. For conventional steel (up to 600 MPA/87022 PSI strength),Brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm Application range of sheet thickness 3 - 35 mm Beveling of pipes from an inner diameter of  ...

diameter: -- mmworkpiece length: -- mmwork piece width: 18 mmrange of angles: 15° - 50° °weight of the machine ca.: 110 kgChamfering system UZ18 HARDWORKERMaximum bevel width 18 mm with automatic feedThe UZ18 Hardworker machine is one of the most powerful automatic feed beveling machines on the market. It is not only suitable for workshops, but also for on-site assembly. The machine has a stepless working angle adjustment system. Thanks to the special design of the drive system, the UZ18 Hardworker is also suitable for harder materials. The machine is equipped with the automatic feed. Working with UZ18 Hardworker is therefore very convenient.For conventional steel (up to 600 MPA/87022 PSI strength), brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm Application range of sheet thickness 6 - 40 mm The bevel angle can be easily a ...

diameter: -- mmworkpiece length: -- mmwork piece width: 0 - 3 mmspeeds: 3600 U/minrange of angles: 30 - 60 (stufenlos) °weight of the machine ca.: 31 kgdimensions of the machine ca.: 530 x 420 x 410 mmMaximum bevel width of 3 mm - Mechanically adjustable bevel angleDesigned for deburring and chamfering steel parts and workpieces.Processing of different materials. Solid and stablemachine construction. Scale for setting the processing depth Security cover Adjustable processing angle For steel, stainless steel, aluminum and other materials Precise, massive and overlong mechanical guide- Number of indexable inserts: 5 pieces (four-sided)- Feed: manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

accumulator pressure: 780 bar0: 38 mlCapacity: 55 kWcontrol: Siemens KP400 weight: 3.300 kgPower connection: 80 kVAvoltage: Hz 50 / 3 x 400 Vrange L-W-H: 3.240x1.200x2.800 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m-Max. flow rate: 38 l/min-Power HP pump: 55kW-Max. water temperature: 40 degrees-Operating voltage: 3x400V/50Hz-Connected load: 80kVA-Total current consumption: 115A-Curb weight: 2300kg-Control: Siemens Comfort Panel KP400The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40_2013/92 weight: 200 kgvolt: 380 VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: pipe deburring machine Tube max. 120 x 120mm Speed 1000/1500rpm Motor 380 volts, 1.5 / 2.1 kWdimensions (l x w x h) approx.: 800 x 500 x 1,300 mm, weight approx.: 150 kg

plate thickness: 5,0 mmturning speed range: 1500 / 3000 U/mindiameter of brush: 250 mmwidth of brush: 80 mmvoltage: 380 Volttotal power requirement: 2,4 / 3,0 kWweight of the machine ca.: 175 kgdimensions of the machine ca.: 700 x 460 x 1200 mmDescription :RASAMAX DUO was specially developed for the fast and reliabledeveloped for deburring straight sheet metal. The deburring machinehas two counter-rotating deburring brushes thattwo offset levels. With this principle, upper andLower edge of sheet metal deburred simultaneously in one operation.This means up to 50% time savings compared to other methods!RASAMAX DUO is suitable for deburring individual pieces and small seriesand designed with its robust construction for continuous use.Furnishing:- efficient deburring of straight sheets- for steel, stainless steel, non-ferrous metalsThe data for this ad was created with ModulMWS - the softwar ...

Description: Brush deburring machine for deburring sheet metal or flat steel, power supply: 380 V 50 Hz, 1.0/1.4 kW, 2 speeds: 1500 and 3000 rpm, brass, aluminium, steel 1500 rpm, stainless steel 3000 rpm , brush diameter: max. 250 mm, additional brushes and toolsdimensions (l x w x h) approx.: 550 x 450 x 1,250 mm, weight approx.: 125 kg

diameter: 250 mmworkpiece length: 0 mmwork piece width: 0 mmtotal power requirement: 1,0 / 1,4 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year: 1999 type: STL weight of the machine ca.: tweight: 130 kgdiameter: mmworkpiece length: mmwork piece width: mmtotal power requirement: kWdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: deburring machine Speed 1500/3000rpm Roller diameter max. 250mm Motor 2.0 / 3.0KW incl. 7 pcs. brushesdimensions (l x w x h) approx.: 1,000 x 600 x 1,200 mm, weight approx.: 150 kg

Year 2014 - twin orbital grinding/polishing pads. with extraction & filtration

Serie 22- 1100 - Orbi

Description: - diameter of cup: approx. 300 mm - supporting surface: approx. 310 x 88 mm - working height: approx. 1050 mmdimensions (l x w x h) approx.: 580 x 360 x 1,200 mm, weight approx.: 200 kg