sheet metal working used for sale (3,315)

Inv. Num. : 9062 Type: OHP 6 Producer: ZAKO Created: GO 2023 Parameters: Control system: FENIX Maximum sheet metal plate width: 6000 mm

Gr. working width: 4040 mm for sheet metal with a strength of 40 kg up to: 3 mm Upper bolster adjustment: 400 mm Underbeam adjustment approx.: 80 mm Max. bending angle adjustment electrically up to approx.: 180° Upper bolster variable speed drive: 4 kW Bending beam drive: 2 x 3 kW Back gauge, working range: 10 - 750 mm electr. Connection: 400 V Weight: 9 t Space requirement: 5570 x 2250 x 2000 mm high

Table shear cutting blade, replacement blades for table shears, replacement cutting edges, cutting blades, shear blades -Cutting blade: Replacement blade for guillotine shears -Cutting length: 870 mm -Hole spacing: 250 mm / Ø23 mm see photos -Quantity: 12x replacement blades available -Price: per piece -Dimensions: 870/23/H90 mm -Weight: 13.5 kg/pc.

Table shear cutting blade, replacement blades for table shears, replacement cutting edges, cutting blades, shear blades -Cutting blade: Replacement blade for guillotine shears -Cutting length: 1290 mm -Hole spacing: 240 mm / Ø13 mm see photos -Quantity: 8x replacement blades available -Price: per piece -Dimensions: 1290/15/H70 mm -Weight: 10.3 kg/pc.

Manual length adjustment via handwheel with digital display For mounting on any Elumatec single-head saw (left) Max. feed length: 3,000 mm Pneumatic Locking Brake

Tool trolley, workshop trolley, transport trolley, table trolley, sliding trolley, material trolley -Material trolley: 2 pieces with swivel casters, used for EHT guillotine shear -Car1: 1100/1010/H530 mm weight 67 kg -Car 2: 1400/1050/H390 mm Weight 107 kg -Swivel casters: 4 each -Submission/Price: complete -Transport dimensions: 1400/1105/H700 mm -Weight: 174 kg

sheet width: 1250 mmplate thickness: 1,5 mmdistance between columns: 1300 mmdaylight opening: 80 mm: 155 °total power requirement: Handbetrieben weight of the machine ca.: 0,18 tdimensions of the machine ca.: 1,4 x 0,8 x 1,3 mSegment-bending machineSegment widths:2x50mm,1x70mm,2x75mm, 2x100mm,4x150mm, 1x170m.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26050 Univ. notching sawing machine Technical data: - Saw blade dimensions - vertical 400 x 3.5 x 40 mm - - horizontal 400 x 3.5 x 40 mm - Notching area / notch depth vertical 135 mm - Notching area / notch depth horizontal 105 mm - Notching width at 90° to 280 mm - Notching width at 30° to 100 mm - Vertical saw blade manual 90° - 30° swivel via handwheel - Use as a Schiftersäge without horiz. Saw blade possible - Profile stop shoulder can be swivelled 30° - 90° - 30° - Pneumatic material vise - Coolant spray device - Air connection 6 bar - Drive 400 V / 2 x 2.2 kW / 2800 rpm - Space requirement approx. W 2200 x H 1600 x D 1400 mm - Weight approx. 800 kg

Qty. 1 Second-hand slitting line Mfc.: LOOPCO Built: 1976 Stopped: 2024 New make Recoiler, Slitter Arbor, Deflect roller and others parts revamped by expert company. Strip Width: 1300 mm (Untrimmed) 1250 mm (Trimmed) Thickness: 0.3-3 mm Coil Weight: 15 tons Coil ID: 508 /610 mm Recoiler: 508 mm Slitter stand: 270 mm dia Material: Cold rolled steel Line Length: 12 meter Width: 8 meter

EHT VarioPress 175-35 CNC press brake was built in 2004 in Germany by EHT Werkzeugmaschinen GmbH (now TRUMPF). Currently, the machine is installed 50 cm below floor level, and the new installation requires either a recessed area to be prepared in the floor beneath it or a platform to be built for the operator. The machine is designed for precision machining of workpieces with a maximum length of 3550 mm. The machining process is performed with a high press force of 175 tonnes, which, combined with an extremely stable design, guarantees excellent bending results, even during the most intensive challenges. All this is complemented by the advanced CYBELEC control system, which significantly facilitates the daily operation of the machine. The EHT VarioPress press brake weighs 14900 kg. Technical specifications of the EHT VarioPress 175-35 press brake - CNC controller: CYBELEC DNC 1200 ...

DURMA AD-S 30175 CNC hydraulic press brake was built in 2009 in Turkey by DURMAZLAR MAKİNA SANAYİ ve TİCARET A.Ş. The offered machine is an excellent choice for precision machining of workpieces with a maximum length of 3050 mm. The machining process is performed with a high force of 175 tons in four numerically controlled axes (X, Y1, Y2, R). The state-of-the-art technology used makes it more precise and energy-efficient than other presses available on the market. These include, among others, the manual deflection arrow compensation function, which ensures that the desired angle is achieved along the entire length of the bent workpiece. The sturdy construction, combined with economical drives, in turn guarantees excellent bending results, even during the most intensive challenges. The positioning of the material is facilitated by front supports with T-slots and a back stop operat ...

Die holder, notching tool, punching tool, punch, punch die, punch stamp -Punch tool: Ø 23.5 mm -Hole: Ø 122 mm -Matrix: Mounting diameter 70 mm -Overall dimensions: Ø 122 x 172 mm -Weight: 3.8 kg

A Trumpf punching machine still in operation, including a Trumalift loading and unloading unit that has not been used for a longer period, is available. 1) CNC punching machine Trumpf TruMatic 500, year of manufacture: 1993, max. punching force: 220kN, max. sheet thickness: 6.4mm, max. workpiece weight: 150kg, max. punching diameter: 76.2mm, simultaneous motion: 108m/min, stroke rate: 900/min, machine dimensions X/Y/Z: approx. 6700mm/5800mm/2200mm, weight: approx. 11000kg. 2) Trumpf Trumalift SheetMaster 1250 loading and unloading system, year of manufacture: 1993, max. sheet dimensions X/Y: 2500mm/1250mm, max. sheet thickness: approx. 8mm. Documentation available. An on-site inspection is possible.

Release Station 1: Max. sheet thickness: 6 mm steel, 4 mm stainless steel Fixed 90 degree angle with stops Knife length 225 mm Station 2 Incision: Max. cutting width: in one cut 25 mm at 100 mm cutting depth Max. sheet thickness: 4 mm steel Weight: 800 kg

Key data: 1020 mm, 3 mm

Max. bending length: 1020 mm Max. sheet thickness: 3.5 mm steel Bending rail ground Weight: approx. 1000 kg

Offered is a hydraulic punching machine: Punching force: 100tons (Tm), max. punching cross-section: 2350mm², punching capacity (standard): Ø50mm at 15mm material thickness, punching depth: 500-800mm, incl. special accessories: round punch: max. Ø80mm at 9mm, max. Ø100mm at 7.5mm, square punch: 50mm at 12mm, 60mm at 9.5mm, 70mm at 8mm, rectangular punch: max. 90 x 25mm at 10mm. Inspection possible by appointment.

The MAXPRO200® plasma cutting system achieves impressive cutting speeds, consistent cutting quality and an exceptional service life of the wear parts in air or oxygen plasma gas. The optimal cutting parameters are automatically set and controlled in one step to simplify operation even more. Designed for mechanized and manual cutting and gouging at high loads and stresses, the MAXPRO200 delivers reliable performance across a wide range of industrial applications. The package offered here consists of: 1. SWIFT-CUT CNC FLAME CUTTING TABLE 1-a. Control Console 1-b. Software 1-c. Cutting table with gantry guide 2. HYPERTHERM MACHINE BURNER 2-a. Hypertherm MaxPro200 2-b. MaxPro200 Wear Parts Kit 3. MACHINE OPTIONS 3-a. Swift-Mark Marking System 3-b. Original Equipment Kit 3-c. LAN port

Offer 26091 Technical data: - Max. working width 3200 mm - max. material thickness at 40 kp / mm² strength 2.5 mm - Bending angle adjustment electronically pre-selectable 0 - 180 ° - Operation via hand or foot switch - Largest opening width / stroke of the upper beam 200 mm - Height adjustability - bending beam 80 mm - the lower beam 90 mm - Upper bolster drive approx. 400 V / 1.8 kW - Bending beam drive approx. 400 V / 2.6 kW - Space requirement approx. W 4200 x H 1550 x D 2200 mm - Weight approx. 3800 kg

Offer 26093 Technical data: - Max. cutting length 3050 mm - Max. material thickness at 40 kg/mm², strength 2.5 mm - Cutting gap adjustment - Cutting angle 1°35 - Strokes 50 1/min - Stand projection 100 mm - Table height approx. 750 mm - Front angle stop 850 mm - 2 pieces support arms 500 mm - man. Backgauge can be operated from the front 5 - 750 mm - Sheet metal holding pneum. Supports - E – Footswitch - Drive 400 V / 5.5 kW - Space requirement approx. W 3800 x H 1500 x D 1400 mm - Weight approx. 2900 kg

Inv. Num. : 9052 Type: OmniMat L 5000 Producer: Messer Created: 2012 Parameters: Work table length: 6000 mm Work table width: 3000 mm Maximum sheet thickness when cutting: 80 mm Maximum sheet thickness when cutting (stainless steel): 45 mm Maximum sheet thickness when cutting (aluminium): 40 mm Maximum thickness of cut sheet (carbon steel): 50mm Plasma source: HPR 400 XD Machine weight: 2250 kg

TOOLMET GATO GC-G-M-2040 oxy-fuel cutting machine was built in 2020 in Poland by Toolmet Sp. z o.o. This extremely efficient machine is an excellent choice for businesses placing emphasis on high accuracy and repeatability of the produced parts. It enables precise, 4-axis shape cutting of workpieces made of thick steel sheets. The machining process is performed fully automatically by means of a reliable gas torch according to pre-programmed cutting programmes. The work table with a length of 4000 mm and width of 2000 mm is equipped with a sectional extraction system with 6 pneumatically controlled sections. This solution effectively eliminates any contamination generated during the cutting process, ensuring a high level of safety and great user comfort. In order to guarantee smooth movements and high positioning accuracy, a lubrication-free drive system and powerful servo motors in all l ...

Hydropneumatic mode of operation Punching force: 50 kN Working stroke: 35 mm Projection: 110 mm Installation height: 140 mm

Max. cutting length: 2040 mm Max. sheet thickness: 2 mm steel Manual backgauge up to 500 mm Side stop and table extensions Knife sharpened 1900 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 50 mm -Load capacity: 4500 kg -Weight: 31 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 30 mm -Load capacity: 3000 kg -Number: 2x terminals available -Price: per piece -Weight: 14 kg/piece

Separating tool, punching tool, punch, punching die, punching punch, gill forming tool-Punching tool for: holding matrices-Bore diameter: 70 mm-Dimensions: 220/317/H115 mm-Weight: 32 kg

Working lenght 2540 mm Material thickness max (400 N/mm²) 2.5 mm Upper beam upstroke max 280 mm Gauging system (rectangular) 6-1550 mm Gauging system (T-shape) 6-3050 mm

Max. sheet thickness: 3 mm steel Roller center distance: 125 mm Largest radius: 500 mm Clockwise and counterclockwise rotation Weight: approx. 500 kg Other castor sets on request

Automatic feed via Elgo control system E 255 For mounting on any Elumatec single-head saw (right) Max. feed length: 3000 mm

Base for press brake tool, bending tool, die, bottom knife, lower tool, prism tool, reversible prism, 1-piece die block for die bending machine, die tool, folding tool -Tool: for press brake, base for press brake tool -Dimensions: see drawing in the photos -Dimensions: 2500/70/H22 mm -Weight: 26.1 kg