subcategories
(3rd category level)
Manufacturer:
(Category: 107)
The machine is in good technical condition, testing is possible by prior arrangement. Machine length: 9300 mm (including pallet changer) Machine width: 4700 mm Machine height: 2200 mm Machine weight: 5500 kg Control unit SINUMERIK 840D SL Laser TruDisk 10,000 W Axis travel X-axis: 3000 mm Y-axis: 1500 mm Z-axis: 115 mm Maximum material thicknesses Hot-rolled steel: 35 mm (O2) Mild steel: 25 mm (O2) Mild steel: 12 mm (N2) Mild steel: 8 mm (Air) Stainless steel: 40 mm (N2) Stainless steel: 25 mm (Air) Aluminum: 30 mm (N2) Copper: 12 mm (O2) Brass: 12 mm (N2) Closed protective cabin TruDisk laser motion unit Cutting unit Extraction unit Pallet changer Hydraulic unit Cooling unit Longitudinal conveyor Cross conveyor Media Power supply: 400 V / 50 Hz Power consumption: 63 kVA Fuse: 3 x 100 A Control voltage: 24 V Compressed air: 7–10 bar (7–15 bar for cutting) Nitrogen: 30 bar Oxygen: 20 ...
Qty. 1 Second-hand slitting line - dismantled Mfc.: Guida Impianti SpA Built: TBA Strip width: 20 - 650 mm Thickness: 0.20 - 3 mm Coil for 9400 kg Entry coil up to 5 ton Worked for Aluminium, LAF and Stainless Steel
Punching force: 500 kN For example, punches a 20 mm hole in 18 mm steel Large WBL support table with stop cam Stroke release via foot switch Range of tools is included in the price
Max. cutting length: 2540 mm Max. sheet thickness: 2 mm steel Manual back gauge up to 550 mm side stop and table extensions Knife sharpened 1600 kg
Distance between the uprights: 4300mm, cutting length: 4050mm, blade length: 4200mm, cutting angle adjustable: 1.5-2.5°, min./max. strip width with front gauge: 40mm, min./max. strip width with rear gauge: 1000mm, table height above floor: 850mm, table length: 4200mm, table width: 650mm, with 3 extension arms each 500mm, internal distance between cutting blade and hold-down plus 10mm: 35mm, lower blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, upper blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, guide rulers for square cuts: 1 piece, accessories/special equipment: gauge adjustment, table extension, sheet metal chute, side gauge 1000mm, cutting line limit, with documentation. An on-site inspection is possible.
sheet width: 3050 mmplate thickness: 2.5 mmthickness at Niro-steel: 1.5 mmno. of strokes: max. 35 Hub/mincutting angle: 2°10 table height: 905 mmtable width: 390 mmback stop - adjustable: ca. 750 mmControl: konv. engine output: 3.0 kWweight of the machine ca.: 1750 kgrange L-W-H: 3730 x 2070 x 1400 mm New price approx. 45.000 euros () Special price on requestEquipment:- robust / motorized swing cut guillotine shears- Machine with electric material / backgauge Traverse path approx. 750 mm (infinitely variable adjustment range) analog position indicator Manual adjustment from the front- unbreakable and torsion-free welded steel construction- Compact and clear machine construction- 1x hold-down beam- Integrated sheet holding system for thin sheet blanks- sheet/cut material removal at the front (operator side)- 1x side stop with mm scale- Extendable table extension (approx. 350 mm)- 1x free ...
This 6-axis GASPARINI PSG 330/4000 Variante C was manufactured in 2007. It features a bending force of 330 tons and a useful bending length of 4100 mm. The machine includes a stroke of 400 mm and an X-axis travel of 800 mm. If you are looking to get high-quality bending capabilities, consider the GASPARINI PSG 330/4000 Variante C press brake we have for sale. Contact us for further details.
Offer 26138 Technical data: - 90° cutting head pneumatically operated - Cutting thickness - normal steel up to 2 mm - Stainless steel up to 1.5 mm - Aluminium up to 3 - Blade length 130 mm - Table size W 600 x D 380 mm - Working height 940 mm - Footswitch - Compressed air requirement 6 - 8 bar - Space requirement approx. W 600 x H 1250 x D 850 mm - Weight approx. 180 kg
Offer 26137 Technical data: - Flat steel shears - knife length 360 mm - For flat material 350 x 13 mm - or 230 x 20 mm - Profile steel shears - L-steel at 90° 140 x 13 mm - at 45° 70 x 7 mm - T-steel at 90° 70 mm - Steel bar shears - round steel 50 mm - Square steel 42 mm - Notching device - for material up to 12 mm - Right notching up to 52 x 90 mm - Hole punch - punching force approx. 550 KN - - Stroke infinitely variable 0 - 60 mm - Perforates in steel up to 30 mm Ø in 16 mm - Projection 320 mm - Hydraulic drive 400 V / 5.5 kW - Two separate working cylinders and separate foot switch - Space requirement approx. W 1400 x H 1600 x D 750 mm - Weight approx. 1300 kg - with: - various punches + dies in a separate tool cabinet - Support stop table - Stop
puncher: 100 tround bar steel: 50.0 mmsquare edge steel: 50 x 50 mmL-beam: 150 x 150 x 13 mmhole punching press: capacity (dia. x thick.): Ø 30.0 x 26 mmshear: flat material: 600 x 15 mmthroat: 300 mmwork stroke: 80.0 mmwork height max.: 1165 / 960 mmtotal power requirement: 9.0 kWweight: 2250 kgrange L-W-H: 2050 x 1200 x 2050 mm well-maintained condition () current new price approx. 30.000 euros special price on requestEquipment:- electro-hydraulic profile steel shears with 4x work stations Flat steel shears Profile steel shears Hole punch notching station- driven by two hydraulic cylinders- Infinitely variable stroke adjustment- Support table at hole punching station- Material scraper- Lateral storage options- 2x freely movable foot switches- Many accessories included in the scope of delivery swiveling machine lamp Various punch dies Spare blades for the flat steel station ... etc.- ...
puncher: 70.0 tsquare edge steel: 45.0 x 45.0 mmround bar steel: 45.0 mmL-beam: 150 x 150 x 13 mmhole punching press: capacity (dia. x thick.): Ø 27.0 x 20 mmshear: flat material: 450 x 15 / 300 x 20 mmthroat: 300 mmwork stroke: 70.0 mmwork height max.: 1095 mmtotal power requirement: 9.0 kWweight: 1925 kgrange L-W-H: 1800 x 1200 x 2000 mm current new price approx. 25.000 euros special price on requestEquipment:- electro-hydraulic profile steel shears with 4x work stations flat steel shears profile steel shears hole punch notching station- driven by two hydraulic cylinders- stepless stroke adjustment- support table at hole punching & notching station- material stripper- side storage options- 2x freely movable foot switches- operating instructions (PDF)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS electronic controls OVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 200 mm sheet thickness max.: 4.5 mm coil weight max.: 0.5 toDECOILER coil weight max.: 0.5 to mandrel expansion range from: 250 mm mandrel expansion range up to: 550 mmLEVELLER UNIT sheet width max.: 300 mm sheet width (min): 20 mm sheet thickness max.: 4 mm sheet thickness min.: 0.5 mm material cross section max. (450 N/mm2): 800 mm² number of leveller rolls: 7 diameter of leveller rolls: 65 mm number of infeed-/outfeed rolls: 4 diameter of feed rolls: 65 mm drive power: 1.5 kW loop controls: yes ELECTRICAL SPECIFICATIONS mains voltage: 380 V mains frequency: 50 Hz
Punching capacity steel: 25x16mm, material strength: 45/60/80kg/mm² depending on hole diameter, angle steel 90°: 110x10mm, angle steel 45°: 90x9mm, T-steel 90°: 110x10mm, T-steel 45°: 90x9mm, U and I profiles: up to NP/IPE 18, round steel diameter: 42mm, square steel: 38x38mm, max. sheet thickness for notching: 12mm, notching width: 50mm. An on-site inspection is possible.
round bar steel: 32 mmsquare edge steel: 60 x 6 mmL-beam: mmpressure: 50 tstroke: 10 - 28 mmtotal power requirement: 4 kWweight of the machine ca.: 1 tdimensions of the machine ca.: 0,65 x 1, 2 x 1, 67 mMaximum pressing force 50 tFLAT STEEL SHEAR PERFORMANCEFlat steel: 150 x 15 mm or: 180 x 18 mmPERFORMANCE OF PROFILE STEEL SHEARS Steel 90°: 80 x 8 mm 45°: 50 x 6 mmAngle steel 90°: 100 x 10 mm 45°: 50 x 6 mmPERFORMANCE OF BAR STEEL SHEARS Round steel: 32 mmSquare steel: 30 x 30 mmPERFORMANCE SQUARE NOTCHER: 60 x 6 mmSheet metal up to: 10 mmNotch width: 42 mm:Notch depth: 55 mmPERFORMANCE HOLE PUNCHPunching force: 50 tStroke: 10 - 28 mm Punches:27 in 14 mmProjection: 155 mmGENERAL DATADrive power: 4.0 kWOil capacity: 40 lDimensions L x W x H: 650 x 1200 x 1670 mmWeight approx.: 840 kg Translated with DeepL.com (free version)The data for this ad was created with ModulMWS - the softwar ...
sheet width: 500 mmplate thickness: 0,8 - 5 mmno. of straightening rolls: 7 straightening roll diameter: 80 mm2 pinch rolls, diameter: 80 mmAdjustable entry heightPass line: 505 mmOiling systemRoller cageStrip guide: 505 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 9163 Type: MAH 40/3 CNC Producer: AMOB Created: 2022 Parameters: Diameter of the cylinders: 148 mm Length: 1200 mm Width: 770 mm Height: 1450 mm Weight: 540 kg Hydraulically controlled upper roller feed Can be used vertically and horizontally 3 mechanically driven rollers Side rollers (manually adjustable) Adjustable control pedal 3 standard rollers
Offer 26148 Technical data: - Pressure capacity 420 KN / 42 t - Stroke length 0 - 300 mm - Lifting speed 0 - 0.6 m/min - Tool height 200 mm - Bending performance - with prism MW 125 flat approx. 200 x 16 mm - with prism MW 240 flat approx. 200 x 24 mm - Tube bending up to 2 inches - CNC control SIEMENS SIMATIC HMI TOUCH - For angle programming + length programming - Controlled length stop 3000 mm - Various bending tools - Operating hours (read) 1404 h - Drive 400 V / 4.0 kW - Space requirement approx. W 850 x H 1250 x D 1250 mm - Weight approx. 1200 kg
Key data: 2040 mm, 6 mm
Max. bending length: 2040 mm Max. sheet thickness: 6 mm steel Upper beam stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Motorized adjustment of the bending beam with digital display (adjustment of the sheet thickness) Manual backgauge with spring fingers up to 1500 mm 5700 kg
Max. saw blade diameter: 280 mm Pneumatic material tensioners Swivel table with detent points Minimum quantity spraying device
sheet width: 2520 mmplate thickness: 3.0 mm: 350 mmSwing beam adjustment: 80.0 mmback stop - adjustable: ca. 1.000 mmControl: FM 5.1 B upper clamping bar adjustment: 20.0 mm/sekbending speed: 37.0 Grad/sektotal power requirement: 4.5 kWweight: ca. 3.250 kgThe ideal solution for individual and series production.A modern design with particularly high rigidity.Designed for continuous performance.Features:- Dynamic, powerful electro-motorized folding machine Upper beam bending beam drive by geared brake motor Bending beam drive with roller bearings- FASTI CNC control TOUCH - FM 5.1 B Swiveling control unit, front right 11.3 color LCD touch screen display Manual / automatic mode selectable Input of actual/target values possible (X axis / angle etc.) Program memory Tool memory- CNC electro-motorized back gauge with rear sheet support surface- CNC electro-motorized folding beam adjustment- 1x e ...
This 3-axis MicroStep AquaCut-W 4001.20 was manufactured in 2018. It features a working range of 4,000 x 2,000 mm and is equipped with a high-pressure pump system capable of 400 MPa. The machine includes automatic height control for the cutting head and a waterjet cutting table with grid support. If you are looking to get high-quality waterjet cutting capabilities, consider the MicroStep AquaCut-W 4001.20 machine we have for sale. Contact us for further details.
Inv. Num. : 9160 Type: Trumatic 500R Producer: Trumpf Created: 2003 Parameters: Compressive force: 22 t
Sheet metal shears, tin snips, sheet metal sheet metal shears, crank-operated sheet metal shears, auxiliary sheet metal shears -mechanical guillotine shears -Cutting width: 1130 mm -Max. cutting thickness: 4.0 mm -Features: Back fence, side fence, 3 supports -Drive: 2.2 kW -Protrusion: 115 mm -Installation dimensions: 2620/1685/H1365 mm -Transport dimensions: 1215/1685/H1365 mm -Weight: 1250 kg
Faceplate bending machine, profile bending machine, bending machine, angle bending machine, pipe bending machine, ring bender, ring former -Diameter of faceplate: 1330 mm -Clamping disc diameter: 775 mm -For an additional charge: other round shapes can be produced -Geared motor power: 1.5 kW -Speed: 86 rpm -Dimensions: 2440/1330/H1400 mm -Weight: 1420 kg
CNC shearing machine manufactured in 2010. This LVD MVS-TS 13/31 features a maximum cutting length of 3100 mm and a cutting thickness of 13 mm. It is equipped with a backgauge range of 1000 mm and a powerful motor with 21.5 kW. If you are looking to get high-quality shearing capabilities, consider the LVD MVS-TS 13/31 machine we have for sale. Contact us for further details.
Press brake manufactured in 2017. This Bystronic Xpert 40/1030 features a press force of 400 kN and a bending length of 1030 mm. It includes a ByVision Bending control system and a 6-axis backgauge for enhanced precision. If you are looking to get high-quality bending capabilities, consider the Bystronic Xpert 40/1030 machine we have for sale. Contact us for further details.
3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 260 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop dimension 5600 x 2200 mm weight 8 ton
Key data: 250 t, 4000 mm
Inv. Num. : 9155 Type: HOL-250/4000 Producer: TOMÁŠEK Created: 2015 Parameters: Compressive force: 250 t Maximum bending length: 4000 mm Distance between frame walls: 3420 mm Maximum stroke: 250 mm Machine height: 2950 mm Machine length: 4040 mm Machine width: 1850 mm Machine weight: 18650 kg Equipment: 1 upper and 2 lower tools The machine has been completely overhauled: New hydraulics New Mitsubishi control unit Controlled bending
3000 x 13mm Front supports, digital back gauge & rear supports
Max. punching capacity: 400 kN Max. shear capacity: 600 kN Punches 20 mm holes in 16 mm steel Shears on the flat steel shear to 300 mm up to material thickness of 12 mm steel Further technical data on request With an assortment of stamps and dies as desired Weight: approx. 1,500 kg
