subcategories
(3rd category level)
Manufacturer:
(Category: 107)
Crowning (Crownering): CNC-controlled Tool holder: Quick-release Tool holder type: European-style Auction-ID: A1-40976-23
Stored in working condition. The buyer must provide his own transport. Elevator available to charge it. Auction-ID: A3-43538-17038
Stored in working condition, buyer must provide transport himself. Elevator available to charge it. Auction-ID: A3-43538-17027
Stored in working condition. The buyer must provide his own transport. Elevator available to charge it. Auction-ID: A3-43538-17040
Equipped with foot control. Auction-ID: A1-41277-229
Stored in working condition with numerous accessories, digitally adjustable with control box. The buyer must provide his own transport. Elevator available to charge it. Auction-ID: A3-43538-17035
Control: CNC AMADAN 04 PC Machine type: CNC turret punch press with fully automatic sheet handling Punching force: 30 t Max. material thickness (steel): 8 mm Working area: 3,000 mm X-axis travel: 2,500 mm Table type: Brush table (scratch-free & low-noise operation) Repositioning: Automatic sheet repositioning Tool lubrication: Air Blow automatic lubrication Pneumatic punches: 2 pcs Power supply: Three-phase Tappet stroke: 31.9 mm Max. hole diameter: 114.3 mm Punching frequency (X/Y direction): - Stroke 8.0 mm – Pitch 25.4 mm – 300 / 375 strokes/min - Stroke 4.5 mm – Pitch 25.4 mm – 375 / 375 strokes/min - Stroke 4.5 mm – Pitch 2.0 mm – 600 / 600 strokes/min Tool turret: Amada Thick Turret Turret speed: 25 rpm Turret capacity: 58 stations (4 auto-indexable) Accuracies: Punching accuracy: ± 0.10 mm Positioning accuracy: ± 0.025 mm Repeatability: ± 0.025 mm Automati ...
Manufacturer: Geka (Maquinaria Geka S.A., Spain) Model: HYD 110 CNC controller: Inter Imex PT 500 Year of manufacture: 1997 Serial number: 16306 Machine type: Hydraulic punching and shearing machine (steelworker) Max. punching force: 110 t Throat depth: 250 mm Strokes per minute (20 mm stroke): 37 /min Punching capacity (hole Ø x thickness): 40 x 10 mm Notching capacity: 10 mm Flat steel capacity: 300 x 15 mm or 200 x 20 mm Angle steel capacity 90°: 120 x 120 x 10 mm Angle steel capacity 45°: 70 x 70 x 7 mm Round bar capacity: Ø 40 mm Square bar capacity: 40 mm Operation modes: Manual / Automatic Functions: Punching, flat bar shearing, angle shearing, notching, bar cutting Emergency stop: Yes Condition: Used, industrial condition, signs of wear consistent with age Remarks: Hydraulic ironworker with CNC positioning control via Inter Imex PT 500. CE marked. Own mass: approx. 2,500 ...
Hydraulic Swivel Bending Machine - Max. dimensions of the sheet metal to be bent: 2000 x 2 [mm] - Electric motor power: 2.2 kW - Bending angle: 0 – 180 degrees Auction-ID: A1-47017-21
The scissors are on the back with an adjustable stop at an angle equipped. Each side is equipped with a millimetre counter, so that the guarantee for tailor-made cuts is absolutely given. - Spring-loaded, automatically operating hold-down devices prevent the movement of the material during the cutting process. - Spring-loaded, automatically operating hold-down devices prevent the movement of the Material during the cutting process Auction-ID: A1-47017-16
Maximum. Sheet thickness steel approx. 4 mmIncluding: Accessories without standWeight: 2-4 t Electric backgauge via control panel, bending angle also adjustment via control panel Auction-ID: A1-46862-12
Machine is like new, has not run for 15 hours. Auction-ID: A1-46862-16
Maximum punching force: 200-250 kNCompressed air termination: 6 barControl voltage: 24 VConnection cable: 35 kVAControl: Bosch, control cabinet: BochTCPunching diameter maximum .76.2 mmSheet thickness maximum. 6.4 mmX Working range without resetting: 2500 mmY Working range maximum. 1300 mmmaximum. X-axis speed: approx. 2500 m/minY speed maximum. 60 m/minFunctions: Punching and rivetingWorking range: approx. 2,500 × 1,1270 mmOperating pressure: 60/170 barTool rotation: yes (rotation vercion)Weight: 17500 + control cabinet: 650 kg + cooling unit: 550 kg, - with air cushion 2 pcs. at the front - With various accessories and spare parts - with approx. 20 pcs scassettes - With 2 scrap hand wagons for small parts and scrap without punching tools, these are sold separately as a mixed lot Auction-ID: A1-46862-3
Punching machine with trump tool holder, back gauge via adjustment wheel with display Working area: approx. 1000 × 500 mmMax. sheet thickness circa. 6 mm steelcontrol voltage: 220 V-required fuse for the machine is 16Weight: approx. 2000 Kg Auction-ID: A1-46862-11
Profile steel shears Round steel 25 mm Square steel 22 mm Angle steel 70 x 7 mm Cutting capacity 100 x 10 mm Sheet thickness 10 mm Total power requirement 1.3 kW Machine weight approx. 0.6 t Space requirement approx. 1.1 x 0.65 x 1.5 m Condition: unchecked (6) Auction-ID: A7-46642-4
Combined sheet metal processing machine with: - Bending, tool widths 25 - 50 - 75 - 150 - 200 - 250 - 300 mm. - Rolls, roller diameter 42mm - Scissors, max. 1015 x 1mm Material width 1015 mm Material thickness 1 mm Speed by hand Weight 0.25 t Dimensions L x W x H 1.4 x 0.6 x 0.75 m Condition: never used / new (5) Auction-ID: A7-46642-65
Hydraulic Pipe Bender Compressive force 16t 8 pieces of bending elements from 1/2\" to 3\" Condition: never used / new (5) Auction-ID: A7-46642-71
Segment Swivel Bending Machine Pneumatic - Manual back gauge max. 830mm - Bending angle preselection via limit switch Sheet width 3000 mm Sheet thickness 2.0 mm Stand width 3140 mm Opening width 80 mm Total power requirement kW Machine weight approx. 1.45 t Space requirement approx. 3.8 x 1.5 x 1.6 m Auction-ID: A7-46642-80
Sheet width 2500 mm Sheet thickness 3.0 mm Stand width 2550 mm Cutting angle adjustment - Back gauge - adjustable max. 510 mm Cutting gap adjustment - mm Total power requirement kW Machine weight approx. 1.8 t Dimensions L x W x H 3.3 x 1.4 x 1.8 m Auction-ID: A7-46642-45
Hand bending machine Flat bar max. 16 mm Square steel 16 mm Round steel 16 mm Weight 45 kg Bending angle max. 180 ° Dimensions L x W x H 0.4 x 0.4 x 1.1 m Auction-ID: A7-46642-242
Segment bending machine Segment widths: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 275mm. Sheet width 1020 mm Sheet thickness 2.5 mm Stand width 1050 mm Opening width mm Bending angle max. 135 ° Machine weight approx. 0.32 t Space requirements approx. 1.4 x 0.6 x 1.3 m Auction-ID: A7-46642-6
Profile steel shears with - 1 foot trigger - Support tables - Rectangular notches - Hole punch incl. tools Round steel 32 mm Square steel 30 mm Angle steel 80 x 80 x 8 mm Cutting capacity flat steel 80 x 13 mm Punching force 36 t Projection 170 mm Working stroke 28 mm Working height 980 mm Material thickness 28 x 13 mm Hole diameter in sheet thickness 25x10 / 30x8 mm Machine weight approx. 0.8 t Space requirement approx. 1.2 x 0.8 x 1.9 m Condition: unchecked (6) Auction-ID: A7-46642-102
Hydraulic guillotine shears with - ELGO control for backgauge - Cutting angle adjustment - Cutting length adjustment - Cutting length limitation (time-dependent) - Sheet thickness adjustment - Backgauge with free-wheeling function - Cutting line lighting - Side stop - 3 support brackets - Good condition Sheet width 3050 mm Sheet thickness 16 mm Stand width 3050 mm Stop depth 15-1000 mm Cutting angle adjustment yes ° Cutting gap adjustment yes mm Connected load 30 kW Machine weight approx. 14..5 t Space requirements approx. 4.0 x 260 x 2.55 m Auction-ID: A7-46642-25
Flat steel bending machine The following bending tools are included: 1\" - 1 1/4\" - 1 1/2\" - 2\", - 2 1/2\", - 3\" Bending tools diameter 1\" to 3\" mm Wall thickness max. 16 mm Machine weight approx. 26 kg Package size max. 0.6 x 0.3 x 0.3 m Condition: never used / new (5) Auction-ID: A7-46642-171
Profile steel shears combined: - Footswitch - Length stop Round steel 30 mm Square steel 28 mm Angle steel 90 x 8 mm Flat bar 150 x 8 mm Pressure capacity 35 t Total power requirement 2.8 kW Machine weight approx. 0.5 t Space requirement approx. 0.75 x 1.0 x 1.5 m Condition: unchecked (6) Auction-ID: A7-46642-47
5-fold combined profile steel shears with: - Flat steel shears - Profile steel shears - Steel bar shears - Notches - Hole punch Round steel 34 mm Square steel 30 x 30 mm Angle steel 100 x 10 mm Flat steel 100 x 14...160 x 1 mm Knife length 175 mm T-steel 100 x 10 mm Notching device: L and T steel 10 mm Hole punch: Pressure capacity 45 t Projection 305 mm Total power requirement 3 kW Machine weight approx. 1.2 t Space requirement approx. 1.4 x 0.8 x 1.5 m Auction-ID: A7-46642-36
10 € 
