We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Manufacturer: AIDA ENGINEERING LTD. Made in: Japan Presses are never used, condition is like new. Feeders and straighteners are available. Capacity: 80 tons Rated tonnage point: 6,5 mm Stroke: 200 mm Number of strokes per minute: 60-150 Bolster area (left-to-right x front-to-back): 1400 x 500 mm Slide area (left-to-right x front-to-back): 1400 x 500 mm Bolster thickness: 200 mm Distance between slide and bolster: 450 mm Slide adjustment: 50 mm Main motor: 45 kW Required air pressure: 5 kgf/cm² Total weight: 33 tons Roll feed Material width: 70=300 mm Material thickness: 0,25-0,4 mm Feed length: 50-120 mm Feed angle: 300-60 deg Uncoiler Coil diameter: 800-1200 mm
used
Bruderer Automatic Precision Punching Press. Type: BSTA 110H. Max. Pressure: 1100 kN (110 T). Speed range: 100 – 800 spm. Year of production: 1976. Fitted with roller-gripper feed unit BBV 320/200 on left-hand side. Max. strip width: 400 mm. Max. strip thickness: 12 mm. Max. feeding pitch: 200 mm. Adjustable stroke: 16-75. Ram height adjustment: 89 mm. Max. Tool width clearance between columns: 1170 mm. Weight of machine: cca. 26000 kg. Electrical cabinet and control. Oil pump. Oil cooler. Fitted with spring feet dampers. Front and rear safety guards with inspection glass.
used
Stroke power: 180 KN (18 tons). Adjustable speed: 100 - 600 strokes per minute. Adjustable stroke: 4 - 36 mm. In very good working condition. Feeder: BBV 60/60 Max. Strip Width: 60 mm. Max. Feeding Length: 60 mm. Max. Thickness: 2 mm. With stroke and speed counter. Programmable speed, number of strokes etc. Three working modes: manual, one stroke and automatic. Heavy Duty, for non stop production. Pneumatic clutch and brake. Machine with warranty 6 months. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx 1.2 tons. Power consumption: 2.2 KW. Technical Air: 8 bar.
used
CONTROLS conventional PRESS FORCES total force (nominal): 20 toSLIDE (MECHAN. PRESS) stroke adjustment: yes stroke min.: 8 mm stroke max.: 38 mm variable speed: yes stroke rate (min.): 100 /min stroke rate (max.): 1800 /minSTRIP-FEEDER feeder type: roll feeder ELECTRICAL SPECIFICATIONS total power consumption: 20 kWDIMENSIONS / WEIGHTS total weight approx.: 3600 kgCoil Reel&Straightener KOHLER (option)
used
Bruderer BSTA 200 High-performance automatic punching press. max. pressure: 200 kN 20 T Speed range: 100 - 600 spm Year of construction: 1990. Feed BBV on the left side. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 mm Ram height adjustment: 51 mm Dimensions of the clamping plate (clamping plate): 510 x 400 mm Bed opening: 400 x 160 mm Max. distance of the tool width between the columns: 410 mm. Connected load: 36 kVA Power 400 V 50 Hz Control voltage: 24 V Machine dimensions: H 2540 x W 1661 x D 855 mm Machine weight: approx. 3100 kg Switch cabinet and control system. Including all original technical documentation in German.
used
BRUDERER BSTA 25 Precision high speed punching press. Nominal capacity: 250 kN; 25 tons. Min./Max. number of strokes: 100/1500. Max width of strip: 200 mm. Adjustable stroke: 13, 16, 19, 25, 32, 38 mm. Fitted with roll feeder BBV 202/120 on left hand side. Feed length variable up to 120 [mm] max. Optional: Sound insulating cabin. Condition: good working and visual order. Oil pump. Oil cooler. Execution: 4 supports. Front and rear safety guards. Fitted on rubber feet. Table dimensions: 530 x 530 mm. Passage between the supports: Longitudinal 540 mm; Lateral 200 mm. Slide/Ram adjustment 51 mm. Documentation in German or English language included. Press weight cca. 4800 kg. Press dimensions: 2055 x 1355 x H26200 mm.
used
PRESS DESIGN drive system: eccentric / crank PRESS FORCES total force (nominal): 30 toPRESS TABLE table surface (left-right): 480 mm table surface (front-back): 428 mmSLIDE (MECHAN. PRESS) slide adjustment: 40 mm stroke adjustment: yes stroke min.: 8 mm stroke max.: 40 mm variable speed: yes stroke rate (min.): 100 /min stroke rate (max.): 600 /minTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 220 mmSTRIP-FEEDER feeder type: roll feeder feeding step min.: 20 mm feeding step max.: 100 mmELECTRICAL SPECIFICATIONS total power consumption: 4.5 kW mains voltage: 380 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 1200 mm &nbs ...
used
PRESS DESIGN feedstock transport direction: left to right PRESS FORCES total force (nominal): 40 toSLIDE stroke: 57 mm stroke rate (max.): 1200 /minSLIDE (MECHAN. PRESS) stroke adjustment: yes stroke min.: 13 mm stroke max.: 57 mm variable speed: yes stroke rate (min.): 70 /min stroke rate (max.): 1200 /min
used
Bruderer press. Year of production: 1985 Condition: perfect The press has a soundproofing cabin and a roll feeder.
used
High speed press Original Manufacturer by: BRUDERER Type: BSTA 30 Technical data: Stroke power 300 KN (30 tons) Adjustable speed 100 - 600 strokes per minute up to 10 strokes in one second Equipped with synchronized BBV feeder Feed pitch up to max. 60 mm adjustable, highly accurate With PLC control Three working mode: single punch, complete stroke and full automatic Emergency stop Pneumatic clutch and brake Weight approx 2.5t Automatic in feed, fully synchronized with punching moment Tool and coiler not included (price on request) Technical Air 8 bar Operators instruction manual Machine with new CE certificate Overhauled - Rebuilt by Silicon plus
used
Pressing force: 160 kN Impact stroke: 100 mm Mounting height: 350 mm Hole in the table: 100 mm Pushhole bore: 32 mm Stand passage: 650 mm Table size: 630 x 400 mm Hydraulic pressure: 280 bar electr. Connection: 380 V, 5.5 kW Space requirement: 1550 x 1050 x 2400 mm Weight approx.: 3 t
used
KAISER V 32 WH high-speed press built in 2006 in Germany allows fully automatic, high-precision machining of sheet metal with a maximum thickness of 4 mm. During the machining process, a reliable ZEHNDER & SOMMER feeder is used, which accurately feeds the sheet metal into the working space of the machine. At the same time, the slider is put into reciprocating motion by an eccentric (crankshaft) and two connecting rods, from the movement of an electric motor with mechanical transmission. The use of this solution ensures unprecedented speed and accuracy of sheet metal pressing, essential during mass production of various types of components. In addition, the KAISER V32 WH eccentric press has a vibration- and oscillation-resistant design, maintaining high stability during even the most intensive machining. The V 32-WH 32 t automatic press weighs 5500 kg. Technical specifications of the K ...
used
KAISER V 40 WH high-speed press was built in 1985 in Germany. The machine’s high press force of 40 tonnes and extensive machining capabilities make it the ideal solution for the mass production of various types of parts. All machining operations, i.e. precise cutting, shearing and bending of the sheet metal, are performed fully automatically by the machine thanks to a reliable feeder that feeds the sheet metal precisely into the machine’s working area. The V 40 WH / 860 eccentric press is also characterised by a high-quality design based on four feet with anti-vibration cushions. This solution effectively dampens all vibrations and oscillations, which translates into high stability during even the most intensive machining. The KAISER V40-WH/860 40t high-speed eccentric press weighs 6800 kg. Technical data of the KAISER V 40 WH automatic press - press force: 40 t - work table dim ...
used
Make: MABU Model: 25 VPR. Made in Germany. Max. Pressure: 250 [kN] (25 [T]) Speed range: 80-400 [spm]. Year of manufacture: 1998. Operating modes: Manual, One-cycle and Automatic. Equipped with two hand start and foot-clamp start. Fixed stroke: 17 [mm]. Ram adjustment: 40 [mm]. Max. Tool dimensions: 400 x 400 [mm]. Power: 3 [kw]. Current: 230 / 400 [V]. Air connection: 5.5 [bar]. Feeder: Silicon SFS 200 on left-hand side. Max. strip width: 200 [mm]. Machine dimensions: H 2350 x W 1700 x D 1400 [mm]. Weight of machine: cca. 2500 [kg]. Electrical cabinet with Mabu Pf 1.3 control. Front and rear safety guards with inspection glass. Technical documentation and operating instructions in English and German included. CE certificate and EUR-1 certificate of origin. On stock, tested and ready for delivery. More used machines from Mabu, Bruderer, Bihler and Schaal available ...
Force of pressure: 63 t table size: 610 x 800 mm throat depth: 350 mm stroke: 200 mm Electr. Supply: 380 V, 15 kW space: 1800 x 920 x 2440 mm weight: 3940 kg
used
High Speed Precision Press Maker Obata (Japan) Year of manufacturing - 1981 Capacity 10 t Stroke length 22 mm Speed 100-400 stroke/min price 6000 EUR
used
CONTROLS conventional PRESS FORCES total force (nominal): 30 toSLIDE (MECHAN. PRESS) stroke rate (min.): 200 /min stroke rate (max.): 1200 /minDIMENSIONS / WEIGHTS total weight approx.: 3600 kgATTACHMENTS (PRESSES) decoiler: yes strip feeder: yes feeder type: roll feeder
used
CONTROLS conventional PRESS FORCES total force (nominal): 30 toPRESS TABLE table surface (left-right): 350 mm table surface (front-back): 330 mmSLIDE (MECHAN. PRESS) stroke rate (min.): 250 /min stroke rate (max.): 1200 /minDIMENSIONS / WEIGHTS total weight approx.: 3800 kgATTACHMENTS (PRESSES) decoiler: yes strip feeder: yes feeder type: roll feeder
used
Schaal SEP 40 Automatic Punching Press. Year of manufacture: 1993. Completely revised in 2023 with new Siemens PLC control. Nominal capacity: 400 [kN] (40 [t]). Min./Max. number of strokes: 100 – 500. Ram adjustment: 70 [mm]. Variable stroke: 8 – 70 [mm]. Ram surface area: 340 – 300 [mm]. Stroke range: 8, 10, 15, 20, 25, 31, 36, 41, 46, 50, 54, 58, 61, 64, 66, 68, 69, 70 [mm]. Table dimensions: 550 x 580 [mm]. Fitted with gripper feeding device SZV 2. Width of strip: 8 - 120 [mm]. Feed length: 2 – 80 [mm]. Feeding thickness: 0.1 – 2 [mm]. Feeding: 180 [°]. Feed accuracy: ±0.01 [mm]. Drive power: 7,5 [kW]. Dimensions (H x W x L): 2300 x 1600 x 1400 [mm]. Weight: 3800 [kg]. Including operating instructions in German and English and schematics included. Also on stock high speed presses: Mabu, Schaal, Bihler and other Bruderer models. Also Ideal BAS welders