Punching force 45 t. 2 pcs. available from stock (Video under power on request)
pressure: 130 tno. of strokes: 50-250 Hub/minsheet width: 250mm mmstroke: 8-120 mmram - range of adjustment: 100 mmtable surface area: 1600x800 mmram surface: 1600x800 mmhole in the table: 1100x250 mmtable height: 1000 mm: 370 mmweight of the machine ca.: 24 tdimensions of the machine ca.: BxTxH 3900x2500x3800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 75 t, 80 mm, 120 1/min
Pressure 75 t Stroke rate 120-600 / min Sheet width 10-300 mm Table size 1050 x 820 mm Pusher clamping surface 960x820 mm Distance table - UK plunger 380 mm Adjustable stroke - max. 80 mm Feed length 0-150 mm Total power requirement 20 kW Machine weight approx. 13 t Feed unit with max. belt speed 70 m/min Eccentric shaft with 4-fold bearings 2 connecting rods Central lubrication incl. magnetic belt conveyor - in use until 2020 -Operating instructions -Manual - Circuit diagram etc..
pressure: 75 tstroke: 8-80 mmno. of strokes: 80-200 Hub/minram - range of adjustment: 70 mmtable surface area: 900x600 mmram surface: 900x470 mmhole in the table: 450x180 mmdist. between columns - front to rear: 500x350 mmdist. between pillars (front to rear): 788 mmtotal power requirement: 10 kWweight of the machine ca.: 10 tdimensions of the machine ca.: BxTxH 1600x1200x2800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 30 t, 100 1/min
Specifications Pressing force 30 t Stroke rate 100 – 600 mm Plunger stroke adjustable up to 40 mm Installation height 300 mm with built-in clamping plate
pressure: 10 tstroke: 8-40 mmno. of strokes: 120-600 Hub/minram - range of adjustment: 40 mmtable surface area: 380x240 mmram surface: 220x140 mmhole in the table: 220x110 mmtable height: 910 mmtool hole in ram: Ø 30 mmthroat: 135 mmtotal power requirement: kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: BxTxH 1000x1500x2000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 75 t, 80 mm, 250 1/min
Pressing force: 75t Table: 650 x 560 mm Plunger area: 500 x 300 mm Stroke rate: 50-250 stroke/min Lifting height: 8-80 mm max. installation height: 400 mm Passage between the side stands: 300 mm Feeder: Manufacturer: GSW Type: WV32/80 Band width: max. 320mm Tape thickness: max. 3.5mm Roller diameter: 80mm
pressure: 25 tno. of strokes: 1500 Hub/minsheet width: mmtotal power requirement: 20 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
very well preserved automatic machine with/without motor reel
pressure: 25 tno. of strokes: 1500 Hub/minsheet width: mmtotal power requirement: 20 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
STANZNIETZUFÜHRER Manufacturer: EM HART Teknologies (Tucker GmbH) Type: ERF230000/3 3x5
pressure: 40 tno. of strokes: 500 Hub/minsheet width: mmtotal power requirement: 5,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 250 tstroke: 37 mmno. of strokes: 30-240 Hub/minram adjustment: 150 mmtable surface area: 1200x1000 mmhole in the table: 500x180 mmtool hole in ram: Ø52 mmtotal power requirement: 50 kWweight of the machine ca.: 35 tdimensions of the machine ca.: LxBxH 3700x2300x3900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 25 tno. of strokes: 60-300 Hub/minsheet width: 150 mmram - range of adjustment: 6-50 mmtable surface area: 350x400 mmram surface: 250x250 mmhole in the table: 130x150 mmweight of the machine ca.: 3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 125 tstroke: 10-80 mmno. of strokes: 240 Hub/minram - range of adjustment: 80 mmtable surface area: 850x600 mmram surface: 760x550 mmhole in the table: 850x130 verstellbar mmtable height: 1100 mmtool hole in ram: Ø 50 mmtotal power requirement: kWweight of the machine ca.: 13 tdimensions of the machine ca.: BxTxH: 3000x2000x3300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 tstroke: 8-140 mmno. of strokes: 105 Hub/minram - range of adjustment: 100 mmtable surface area: 900x625 mmram surface: 600x280 mmhole in the table: Ø 150 mmtable height: 1000 mmtool hole in ram: Ø 40 mm: 490 mmweight of the machine ca.: 7 tdimensions of the machine ca.: BxTxH 1800x2200x2600 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 315 tstroke: 40-200 mmno. of strokes: 20-100 Hub/minram - range of adjustment: 120 mmram surface: 2000x1100 mmtable surface area: 2000x1200 mmhole in the table: 1700x250 mm: 500 mmcolumn travel -side: 820x650 mmtotal power requirement: 45 kWweight of the machine ca.: 44 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 20 tstroke: 8-38 mmno. of strokes: 100-1800 Hub/mintable surface area: 400x400 mmtable pass: 380x80 mmtable height: 1000 mmweight of the machine ca.: 4 tdimensions of the machine ca.: BxTxH 1600x1600x3100mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 tstroke: 10-80 mmno. of strokes: 65-400 Hub/minram - range of adjustment: 80 mmtable surface area: 1030x550 mmram surface: 920x450 mmhole in the table: 700x200 mm: 420 mmweight of the machine ca.: 10 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 tstroke: 10-130 mmno. of strokes: 30-90 Hub/minthroat: 330 mmram - range of adjustment: 100 mmtable surface area: 950x660 mmram surface: 540x440 mmhole in the table: Ø 230 mmtable height: 1000 mmtool hole in ram: Ø 50 mmtotal power requirement: 7,5 kWweight of the machine ca.: 7 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 tstroke: 6-60 mmno. of strokes: 90-550 Hub/min: 300 mmtable surface area: 780x600 mmram surface: 807x460 mmtool hole in ram: Ø 40 mmram - range of adjustment: 80 mmtotal power requirement: 15 kWweight of the machine ca.: 8 tdimensions of the machine ca.: BxTxH 2900x2000x3000 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 tstroke: 4-60 mmno. of strokes: 85-500 Hub/minram - range of adjustment: 80 mm: 320 mmtable surface area: 750x600 mmram surface: 750x600 mmtotal power requirement: 31 kWweight of the machine ca.: 8,2 tdimensions of the machine ca.: BxTxH 2900x1900x2900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 75 tstroke: 8-80 mmno. of strokes: 80-200 Hub/minram - range of adjustment: 70 mmtable surface area: 900x600 mmram surface: 900x470 mmhole in the table: 450x180 mmdist. between columns - front to rear: 500x350 mmdist. between pillars (front to rear): 788 mmtotal power requirement: 10 kWweight of the machine ca.: 10 tdimensions of the machine ca.: BxTxH 1600x1200x2800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 250 tstroke: 37 mmno. of strokes: 30-240 Hub/minram adjustment: 150 mmtable surface area: 1200x1000 mmhole in the table: 500x180 mmtool hole in ram: Ø52 mmtotal power requirement: 50 kWweight of the machine ca.: 35 tdimensions of the machine ca.: LxBxH 3700x2300x3900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 tdistance between columns: 450 mmstroke: 20-50 mmram - range of adjustment: 60 mmtable surface area: 370x400 mmram surface: 250x370 mmhole in the table: 120x280 mmtable height: 850 mmweight of the machine ca.: 2,5 tdimensions of the machine ca.: BxTxH 1600x1300x2800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 tno. of strokes: 30-70 Hub/minMax ram stroke: 130 mmram adjustment: 100 mmtable surface area: 950x630 mmram surface: 630x600 mmthroat: 340 mmdayligth: 480 mmcoil: GSW total power requirement: kWweight of the machine ca.: 8,9 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
