x-travel: 1.200 mmy-travel: 600 mmz-travel: 675 mmControl: Heidenh.iTNC 620 HSCI FS table-size: 1.220 x 620 mm: 40 fachDistance between table and spindle: 735 mmturning speeds: 10.000 U/minspindle drive: 18 kWInternal cooling system: 30 bartotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m-Electronic steering wheel.-LINEAR RULES.-Laser probe measuring tools.-Preparation for piece measuring probes. PROBE NOT INCLUDED.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 600 mmgear width: 500 mmmax. module: 15 min. module: 1 total power requirement: 2 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2x1,5x2 mThe rounding of the teeth is obtained by coordinating alternative movement of the cutter and rotary movement of the piece. The alternative movement of the cutter is obtained by rotating a cam, shaped in order to obtain radius or cusp rounding. A series of 4 cams allows to work modululus from 1 and 16 included. An regulation device allows change the modulus between the minimum and maximum value of every cam. The rotation of the piece is controlled by a three-stage gear wheel which forms the dividing system. The piece lock and the movement of the rapid entry of the cutter to the piece is controlled by pneumatic servo devices. The practicality and rapidity of the equipment, as well as the wide range of profiles availab ...
max. workpiece diameter: 0 mmmin. workpiece diameter: 0 mmworkpiece length: 0 mmtotal power requirement: 0 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 0 mThe UMA was built in 1961 and the guides have been rebuilt.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pointing milling machine: für Stangen carbide turnover plates: 4 Stück working area: Rund, Profil+vierkant mmworking range: 80 (100) an 25 mmmilling drive: 380/420V, 18,5 KW, 50 Hz kWrevolutions per minute: Fräsantrieb: 1465 U/min: . clamping devices hydraulic pneumatic: hydraulisch infeed device: hydraulisch : ca. 5 lfdm x 300 mm : hydraulic power unit: Rexroth tank: 250 lcoolant tank: mit Spänekasten lcontrol panel: switchgear cabinet: mit Klimaanlage control: SIEMENS S 7-300 Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
round bar steel: 63 mmsquare edge steel: 55 mmflat steel: 100 x 25 mm: engine: 380 V, 6,3 kW weight: ca. 2.450 kgPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Year: 2006 Jahrmodule range: ab 0,5 mmtravel -x axis: 1800 mmtravel -y axis: 200 mmtravel -z axis: 650 mmControl: Technical Details:• Max. Rotary table Workpiece diameter = 5 bis 400mm• Max. Rotary table load = 180kg• Axis X= 1800mm Y=200mm Z=650mm• Tailstock measuring range = 20 bis 900mm• Modul range from 0,5mm• Max. Rack length = 1200mm• 6x Probe changer inkl. 6x SP600M probe plates• Machine temperature compensation• Machine air damping• Build in 2006• Accessories such as, driver, reference ball etc. as shown• Jaw chuck D=250mm with inside and outside jawsThe following software modules are included:• TMain – Programm Management• TStylus – Stylus Management• TCali – Stylus Calibration• TAmo – Axis Workpiece Alignment• TGear – Spur and helical gear measurement• TShaft – Software for Dimension for form, position elementes, diameters,lenght ...
x-travel: 530 mmy-travel: 600 mmz-travel: 300 mm0: 7 barAir consumption: 70-90 Nl/min.voltage: 120/230V+-5% kVAtotal power requirement: 1,5 kWweight of the machine ca.: 22 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 600 mmtable width: 400 mmx-axis: 400 mmy-axis: 300 mmz-axis: 350 mmworkpiece sizes: 900 x 630 x 350 mmvolume: 490 Ltotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 550 mmy-travel: 1200 mmz-travel: 450 mmcontrol: 85er 8bit total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
