2,391 grinding machines used for sale

Grinding is accurate and rapid, easy operation with no skill to grind. With diamond grinding wheel, it can be equipped directly with an accurate angle and long service life. The electrically controlled and powerful motor: stable frequency, strong horsepower and long service life. Bearing shaft and locking unit. The machine is set up with the function of adjusting a point (central point) size, which can effectively coordinate with the material of drill hole and the rotation speed. It can control the quality precision and prolong the service life of the drill bit. Standard with CBN grinding wheel for the HSS material. Grinding Range:Φ3-Φ13, Point Angle:100°~135°, Power:AC220V, Motor:120W, Speed:4400rpm, Standard Equipment:Grinding wheel:CBN (for HSS)×1, Eleven collets:Φ3,Φ4,Φ5,Φ6,Φ7,Φ8,Φ9,Φ10,Φ11,Φ12,Φ13 Machine condition: unchecked. Approx. Transport dimension: LxWxH  ...

grinding diameter:250 mmgrinding length:630 mmcentre height:125 mmcontrol:Siemens S7 swing diameter:280 mmcentre distance:630 mmgrinding head swivelling:90 °table swivelabel +/-:+10/-7 °grinding wheel dia. x width x bore:400 x 40 x 127 mmgrinding wheel dia. according abrasion:250 mmmax. grinding wheel width:63 mmswing in open rest:70 mmswing in closed rest:70 mmtaper bore of workpiece spindle:4 Morsetaper of tailstock quill:4 Morsestroke tailstock centers:30 mmclamping force tailstock center:50-1500 sgrinding head swivellable +/-:+15/-45 °output of wheelhead motor:4 kWwork piece motor:0,7 hydraulic motor:1,1 kWcool pump motor:0,155 kWlubrication pump motor:0,155 kWelectro motor internal grinding:0,75 kWtotal power requirement:10 kVAweight of the machine ca.:3000 kgdimensions of the machine ca.:L3000/B2300/H1600 mmstepless spindle speed:und Werkstückantrieb Modernized and overhauled N ...

internal diameter:100 mmgrinding depth:160 mmswing diameter:300/450 mmcentre height:290 mmmax. outer diameter:300/450 mmwork piece spindle speed:50-360/90-700 U/minweight of the machine ca.:2900 kgMachine size (LxWxH):2500x1750x1800 mmface grinding attachement:mit Schleifscheibe internal grinding spindle:DKF Typ SLA 60x400 mit 20.000 U/min grinding wheel dresser:auf Tisch 3 jaw chuck Ø:200 mmcoolant system with magnet grate:und Wassertank frequency converter:f. stufenlose Spindeldrehzahl f. Innenschleifeinrichtung 100 % before loadingwarranty:noneone used internal grinding machine, make: Jotes, type: SOJ 10M, year of produktion 1986

grinding diameter:260 mmgrinding length:1000 mmcentre height:130 mmdimensions of grinding wheel:400x60x127 mmgrinding wheel speeds:1700,1900,2200 U/mingrinding head swivelling:+/- 30 Gradtable swivelling +/-:9 GradTailstock spindle taper:4 MKgrinding wheel motor:4 kWhydraulic motor:1,5 kWwork piece motor:0,37 kWnet weight:2400 kggross weight:2950 kgPLC control:Siemens S7 tailstock sleeve movement:pneumatic, via foot padel operating panel:New Rittal operating panel with touchscreen screen from Siemens centers sleeves:2 grinding wheel flange:2 unused cylindrical grinding machine, manufactured by ABA type URS 400 Year, 2009Further technical data, and standard and optional equipment, as defined in Appendix.Payment: 100% before loading of the machineWarranty: no

grinding diameter:180 mmgrinding length:500 mmcentre height:90 mmworkpiece spindle: spindle speeds:120-600 U/minwork piece motor:0,2 kWQuill travel:20 mmweight of the machine ca.:1400 kg

x-travel:400 mmy-travel:250 mmworkpiece height:max. 500 mmz-travel:500 mmtable clamping surface LxW:550x330 mmpower requirement:6 kWTotal weight, approx.:2200 kground table d = 300 mm

grinding diameter:600 mmgrinding length:4000 mmcentre height:320 mmmax. workpiece weight:3000 (zw. Spitzen) kgmax. workpiece weight:6000 (m. Lünetten) kggrinding wheel diameter:760 mmgrinding wheel width:100 mmgrinding wheel speed:45 m/sectable travel:4400 mmtable speed -stepless-:10~6000 mm/minRotation speed of workhead :8~80 1/mintailstock quill stroke:100 mmtaper in tailstock-quill:6 MKspindle drive:22,5 kWWeight approx.:14,1 tdimensions:13000x2900x1800 mmCNC controller:Siemens 828D mit Schleifzyklen open steady:2 Stk./pclive center:2 Stk./pcwarranty: Nonepayment: 100% before loading

grinding diameter:160 mmgrinding length:320 mmcentre height:80 mm100 % before loadingwarranty:12 monthsone general overhauled cylindrical grinding machine, make TOS, type BU 16Our general overhauling includes:regrinding and scraping of all guide ways including lower and upper side of the table. Replacement of all main components. Complete new electric including cabinet according to "CE". Complete new paint (2 colors), 48 hours test run. We guarantee new machine accuracy, technical and optical execution like new with 12 months full warranty.

grinding diameter:400 mmgrinding length:650 mmcentre height:125 mmtotal power requirement:5/8,25 kWweight of the machine ca.:3,4/3,5 t

1x Bosch Scintilla SA, 1x unknown.

Specialize in grinding screw tap. It's precise, easy operation and efficient, also can save large sum of expense for purchasing blade annually. With diamond wheel, can be secondary re-used, with accurate angle and long service life. The electrical controlled high-rate DC motor features stable power, strong horsepower, efficient and long service life. Patent product can grind all the front cutting face, also include the front cutting lip. M20 tap shank is within 14 for grinding. Point Angle:5°~30°, Power:220V, Motor:160W, Speed:4400rpm, Standard Equipment:Grinding wheel:CBN (for HSS), Standard collets:Φ5,Φ7,Φ8,Φ9,Φ13,Φ14 Machine condition: unchecked. Approx. Transport dimension: LxWxH 360 x 270 x 310 mm; Approx. Weight: 16kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance.

maximum stone diameter 200 mm; equipped with 2x drill chuck; mounted on central steel base;

Manufacturer: ELB-Schliff Type: not fully visible (corresponds to type Juwel or similar series) Processing area / table size: approx. 1000 × 400 mm Magnetic clamping plate: • Type 112-35760-18 • Size approx. 800 × 400 mm • Operating: 110 V DC, 1.2 A Travel: • Longitudinal travel: approx. 900–1000 mm • Transverse travel: approx. 350–400 mm • Vertical stroke grinding head: approx. 300 mm Grinding spindle / motor: • Drive unit mounted on the Z-carriage • Typical power approx. 5–7 kW (depending on size) • Direct-driven grinding spindle Feed / Control: • Automatic longitudinal feed • Automatic transverse stroke • Manual and semi-automatic delivery • Control console with Y and Z position indicator • Adjustment wheel for infeed steps and grinding cycles Coolant Facility: • Separate coolant tank • Heavy duty pump • Return filtration  ...

HBM Drill Sharpener, Drill Grinder From 3 to 13 mm In just three simple steps, you can ensure that blunt, worn drills are extremely sharp again. The grindstone at the drill grinder consists of diamond and is therefore extremely hard. That way you always achieve the desired results quickly. You can be sure of a good result, especially with HSS drills. In this way, this device is perfect for use in industrial workshops. Furthermore, the sharpener is suitable for use on just about any type of drill. So it is a flexible tool.

including: - control cabinet with 220/380 transformer - hydraulic power unit - cooling with paper filter - 2 drawer cabinets with various accessories and machine tools

including: - control box - batch of grinding stones - Cooling with paper filter

grinding diameter:1000 mmgrinding length:6000 mmcentre height:510 mmmax. workpiece weight:1800 (zw. Spitzen) kgmax. workpiece weight:7000 (m. Lünetten) kggrinding spindle speed:400-1200 1/mingrinding wheel diameter:915 mmgrinding wheel width:100 mmgrinding wheel peripheral speeds::35 m/seccross adjustment:autom. 0,001 mmcross adjustment:mit Handrad: 0,001/0,01/0,1 mmtable travel:6200 mmtable speed -stepless-:10~4500 mm/minRotation speed of workhead :3~30 1/mintailstock quill stroke:150 mmtaper in tailstock-quill:6 MKtailstock adjustment:über Pneumatik tailstock quill adjustment:manuell spindle drive:30 kWWeight approx.:26 tdimensions:17500x3700x1900 mmsurface roughness: max. 0.3µm Racylindricity:0.002~0.005 mm/m roundness:0.002~0.005 mmCNC controller:Siemens 828D mit Schleifzyklen fully enclosed:Optional open steady:Optional live center:2 Stk./pcwarranty: Nonepayment: 100% before load ...

Monier Zahner type 169 belt satin cutter

grinding length:7000 mmgrinding width:1450 mmworkpiece height:1000 mmdistance between columns:1510 mmClamping area:7.270 x 1.250 mmtable load:35 ttable speeds:1-50 m/mingrinding wheel dia. x width:horizontaler Stößel: 630x180 mmspindle drive:horizontaler Stößel: 22 kWvertical movement:250 mmgrinding wheel dia. x width:universal Stößel: 500x50 mmspindle drive:universal Stößel: 7 kWvertical movement:450 mmspindle motor:7,5 kWpivoting angle:universal Stößel: 45 Gradweight of the machine ca.:65 tMachine size (LxWxH):20.200 x 8.150 x 4.920 mm:PLC SIEMENS SIMATIC OP 27 grinding wheel with flange:diverse Used Surface grinding machine, ELB, type SWN 8 NPC-K.Machine cleaned and tested by qualified technician Functionality tested.Surface grinding machine in perfect condition, ready for production.Payment: 100% before loading the machineWarranty: none

Belt width: 75 mm

grinding diameter:600 mmgrinding length:3000 mmcentre height:320 mmmax. workpiece weight:3000 (zwischen Spitzen) kgmax. workpiece weight:6000 (m. Lünetten) kggrinding wheel diameter:760 mmgrinding wheel width:304,8 mmgrinding wheel speed:45 (stufenlos) m/sectable travel:3400 mmtable speed -stepless-:10~6000 mm/minRotation speed of workhead :8~80 1/mintailstock quill stroke:100 mmtaper in tailstock-quill:6 MKspindle drive:22,5 kWWeight approx.:13 tdimensions:13000x2900x1800 mmCNC controller:Siemens 840D mit Schleifzyklen Scales:in X-Achse von Heidenhain open steady:optional live center:optional Stk./pcworkpiece drive:variable 4 jaw chuck:optional CE-design:verlängert die Auslieferung um ca. 3 Wochen warranty: Nonepayment: 100% before loading

grinding diameter:820 mmgrinding length:4000 mmcentre height:450 mmmax. workpiece weight:ohne Lünetten: 4000 kgdimensions of grinding wheel:915 x 130 x 305 mmRotation speed of workhead :3 ÷ 250 1/minz-travel:längs: 4300 mmx-travel:quer: 510 mmworkhead motor:22 kwspindle drive:37 kWtotal connected load:90 kWdimensions:9200 x 3800 x 2630 mmWeight approx.:27 tCNC controller:Siemens 840D mit Schleifzyklen ELECTRONIC WHEEL BALANCING DEVICE:MARPOSS P 7 AUTOM. DYMAMISCHE RADAUSWUCHTUNG micro positioning:MARPOSS ELEKTRONISCHE MIKROMETRISCHE VORRICHTUNG FÜR WERKSTÜCK AXIAL Workpiece measurement:MARPOSS ELEKTRONISCHE MIKROMETRISCHE VORRICHTUNG FÜR DAS WERKSTÜCK , DURCHMESSERKONTROLLE warranty: Nonepayment: 100% before loading

grinding diameter:600 mmgrinding length:3000 mmcentre height:300 mmweight of the machine ca.:11,8 tdimensions of the machine ca.:7100x2300 mmspindle turning speed range:14 - 220 U/mingrinding wheel diameter:650 mmgrinding wheel flange for width 25-40 mm:3 Stk.open tailstocks:3 Stk.chuck:Ø310 mmfixed steady:320 mmDistance between center: 3000 mm.Height of centres: 300 mm.Spindle speed: (n°12) 14 - 220 RpmMax grinding diameter: 600 mm.Stroke the wheelhead:(rapid) 50 mm.Stroke the wheelhead:(rapid+ micrometrical): 1 5 500 m mmm. .Max grinding wheel diameter: 650 mm.Max tilt table: 3° 30'Total absorbed power: 27,7 HpDimension: 7100x2300 mm.Weight approx: 11800 Kg.

Max. grinding wheel dimensions: 175 x 60 mm Auction-ID: A7-39338-41

Universal Cylindrical Grinding Machine, Make: CETOS HOSTIVAR Type: BUC 63 B/6000, built in 2000, overhauled in 2022 Machine number: 0200347/9002133, Circumferential diameter 630 mm, centre width up to 6000 mm, drive up to 31 kVA, with control system type K-51 (teach in NUMERIC CONTROL K51 DINUMERIC), headstock swivel 90 degrees, MORSE 6 workstock spindle, hollow stroke 70 mm, workpiece weight up to 3000/44000 kg, coolant device, fleece filter system, steady rests, spindle load capacity up to 2500 kg, machine weight approx. 18,250 kg, with 2 wooden boxes, on pallet, with stock of means of transport, measuring bridges, V-belts, setting sticks, KADAAN accessories for grinding machine BUC63

Key data: 1100 mm, 5450 mm

CNC Roll Grinding Machine, Make: WALDRICH KLEINKNECHT, Type: WS III C 6.00 X 5000 CNC, YOC 2017, Serial number: WSM5, max. grinding diameter 1100 mm, max. workpiece length up to 5450 mm, max. workpiece weight up to 6500 kg, center height 750 mm, machine weight 40,000 kg, motor power 22 kW, grinding spindle SIEMENS, 31 kW, spindle speed up to 2000 rpm, 2-point online roller measuring system, 200-1000 mm, with steady rests, control SIEMENS SINUMERIC TOUCH DITTLE, Hydraulic power unit, control cabinets, roller measuring device WMG type WMG 9900, SN: 113P