used Drill-Grinding Machines for sale

Grinding range diameter 3-32 mm Peak angle 90° - 180° Drill length 450 mm Facets +10°/-10°/30°/50° Step drill grinder 20-40 mm Step length max. 50 mm Collet diameter 4.75-20.31, 0.25 mm increasing approx. 110 pieces Longitudinal carriage 174 mm Cross-path sledge 70 mm Puller Pot disc diameter 100x50x20 mm Footprint LBH 620x900x1450 mm Weight 600 kg a lot of accessories good condition

drill diameter: 2 - 26 mmturning speeds: 2800 U/mintotal power requirement: 0,75 kWweight of the machine ca.: 190 kg.range L-W-H: ca. 1200 x 800 x 1400 mmElectric 380 Volt: Cooling equipment: Grinding wheel: Chuck: 6 -Backen Machine dealer with own stock of 2500 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CHRISTEN Drill Grinding Machine - with coolant device - approx. 8 grinding wheels Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

drill diameter: 1,5-26 mmdrilling length: x mmlip angle: 180 °weight of the machine ca.: 0.05 tMore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drill grinding machine: Make: Michael Deckel Modell: SO S/N: 22822

grinding diameter max.: 50 mm workpiece length: - mm table adjustment: - mm x-travel: 250 mm y-travel: 170 mm z-travel: 140 mm number of spindle speeds: 2880 rpm height over floor: 1000 mm total power requirement: 3.0 kW weight of the machine approx.: 329 kg dimension machine approx. LxWxH: 0.95 x 1.15 x 1.35 m dimension coolant device: 0.6 x 0.24 x 0.5 m transport dimensions LxWxH: 1.0 x 1.0 x 1.4 m

drill diameter: . mmdrilling length: . mmlip angle: . °total power requirement: kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 1,5x1x1,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drill grinding machine HAARMANN type HSP 30 Fabr. No. 7925 Year of construction 1974 Drill diameter max. 30 mm Grinding wheel diameter 200 mm Grinding wheel width 30 mm Grinding spindle speed 1400 / 2800 rpm Motor power 0.55 kW Mains connection 380 Volt, 50 Hz - Drive via hand crank - Movement over cam disc - Tip angle infinitely adjustable - Diamond dressing holder - 5 different cams Space requirement L x W x H 870 x 650 x 1450 mm Weight approx. 250 kg good condition

drill diameter: 40 mmdrilling length: x mmlip angle: 50-180 °weight of the machine ca.: 0.5 tdimensions of the machine ca.: 1.4x1.2x1.5 mPoint thinning devicewww.marcels-maschinen.chThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drill grinding machine, with sharpening device. Grinding range 3 - 40 mm Number of cutting edges 2 - 3 (4 - 6) Cutting direction right/left Spüitzenwinkel 50 - 180° Tool speed infinitely variable 7 - 60 rpm. Feed infinitely variable approx. 0.4 - 4 mm/min. Grinding wheel diameter 200 x 40 x 51 mm Speed 2815 rpm Power 1,1 kW Step grinding: Grinding range 3 - 40 mm Step length 100 mm Spiral incline infinitely variable 0 - 8 Number of cutting edges 2 and 2 Total weight approx. 600 kg Accessories: Coolant device.

Drill grinding machine KLINGEL BSM 80 - Grinding range: 10 to 80 mm - Peak angle: 50 to 180° - Feed infinitely variable: 0.4 to 4 mm / min - Cutting direction: left / right - Tool length unlimited - Automatic grinding at cutting number: 2 - 3 ( 4 - 6 ) - Tool speed: 8-12-15-23 rpm - Main grinding wheel: 300 x 70 x 127 mm - Speed: 1,420 rpm - Power: 2.2 KW - Sharpening disc: 10 x 8 x 20 mm - Speed: 2,800 rpm - electrical values: 380 V / 3.2 KW - Weight: approx. 1,100 kg Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any tim ...

May SS80 U Machine can be visited by arrangement under power

Drill grinding machine: Make: Meteor Modell: ME 14

Drill diameter: 13 - 32 mm Tip angle: 90° - 140° Speed: 4800 rpm Connection: 230 V Engine power: 0.25 kW Weight, approx.: 28 kg Dimensions, approx.: 490 x 250 x 260 mm Characteristics: - Ideal for grinding HSS/hard metal spiral drills - Safe operation due to forced grinding - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including sharpening device to reduce feed force - Device for back grinding of the drill cuttings to reduce the friction between the drill and the workpiece - Rotor with precision ball bearings Delivery: - Grinding wheel CBN - 20 collet pliers ER 40, 13 - 32 mm - collet holder ER 40 Optional extension, at extra cost: - collet set 5pcs. 8.0 / 9.0 / 10.0 /11.0 /12.0 mm

Drill diameter: 2 - 13 mm Tip angle: 90° - 140° Speed: 4800 rpm Connection: 230 V Engine power: 0.18 kW Weight, approx.: 11 kg Dimensions, approx.: 320 x 180 x 190 cm Characteristics: - Ideal for grinding HSS/hard metal spiral drills - Safe operation due to forced grinding - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including sharpening device to reduce feed force - Device for back grinding of the drill cuttings to reduce the friction between the drill and the workpiece - Rotor with precision ball bearings Delivery: - Grinding wheel CBN - 11 collet pliers ER 20, 3 - 13 mm - collet holder ER 20

Specifications: Drill diameter: 3 - 20 mm Center angle: 90° - 140° Speed: 4800 1/min Connection: 230 V Motor power: 0.12kW Weight, approx.: 8.6 kg Dimensions, approx.: 290 x 150 x 180 cm Characteristics: - Ideal for grinding HSS/carbide twist drills - Safe operation due to forced grinding process - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including propping alignment to reduce feed force - Device for back grinding the drill edges to reduce friction between drill and workpiece - Rotor with precision ball bearing - CE Scope of delivery: - Grinding wheel CBN - 11 collets ER 20, 3 - 13 mm - 7 collets ER 24, 4 - 20 mm - Collet holder ER 20, ER 25

Specifications: Drill diameter: 3 - 32 mm Center angle: 90° - 140° Speed grinding wheel: 4800 1/min Connection: 230 V Motor power: 0.25 kW Weight, approx.: 32 kg Dimensions LxWxH, approx.: 360 x 250 x 310 mm Characteristics: - Ideal for grinding HSS/carbide twist drills - Easy to use - Safe operation due to forced grinding process - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including spout alignment for flawless centering of the drill on the workpiece and to reduce the feed force during drilling - Device for back grinding the drill edges to reduce friction between drill and workpiece - Rotor with precision ball bearing - Vibration-free running due to high dead weight - CE Scope of delivery: - Grinding wheel CBN - 30 ER collets ER 40, 13 - 32 mm (suitable for intermediate sizes) - ...

Drill grinder Manufacturer Rema Type S2/60 Precision lining Sharpening device Special price

Specifications: - Working range 2.0 - 40 mm - Angle adjustable from 40° - 180° - Grinding wheel dimensions 200 x 25 x 32 mm - Coolant device - Drive 400 V / 0.75 kW - Space requirement approx. W 900 x H 1250 x D 900 mm - Weight approx. 300 kg

drill diameter: 2-40 mmdrilling length: x mmlip angle: 40-180 °weight of the machine ca.: 0.4 tDressing devicePoint thinning attachmentMore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - easy operation - Grinding process by means of gear motor - Twist drill dimensions 3 to 50 mm - Sharp angle 90 - 140 ° - adjustable free angle - Grinding motor 400 V / 0.25 kW - Gear motor for swivel movement 400 V / 0.12 kW - Space requirement approx. W 810 x D 570 x H 1260 mm - Weight approx. 120 kg - with - clamping device - Presetting device - Suction

Drill grinding machine 3 -50mm. 90° - 140° , free angle and grinding style freely adjustable, T 810 / W 570 / H 1260mm , 120kg ; 380 V/ 50Hz ;

drill diameter: 3 - 50 mmdust exhaust: inklusive : inklusive : : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drill grinding machine SKF 108 Drill diameter: 40 mm Speed: 2800 rpm Peak angle: 60 - 180° Hmka7wjb8 Rear grinding angle: 3.0 - 25° Tool length - max.: 344 mm Total power requirement: 0.85 kW Machine weight approx.: 238 kg. Dimensions L-W-H: 0.86 x 0.66 x 1.19 m Electrics 380 Volt: Base with suction: Grinding wheel: 200 mm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately o ...

drill diameter: 40 mmturning speeds: 2800 U/minlip angle: 60 - 180 °relief angle: 3,0 - 25 °tool length - max.: 344 mmtotal power requirement: 0,85 kWweight of the machine ca.: 238 kg.range L-W-H: 0,86 x 0,66 x 1,19 mElectric 380 Volt: Base with extraction system: Grinding wheel: 200 mmTwist drill grinding machine for right-hand twist drills, bores with 3 or 4 cutting edges. Tool holder - cylinder or taper shank. Machine dealer with own stock of 2500 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: für max. 60 mm Bohrer weight of the machine ca.: 389 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.