Manufacturer:
(Category: 104)
Tip height: 100 mm Center width: 500 mm Grinding wheel diameter: 300 mm Max. speed grinding wheel 2,825 min-1 Rotatable grinding head 90° left and right Max. workpiece speed: 750 min-1 Spindle cone MK 4 Tailstock 3-jaw abrasive chuck 125 mm Face Plate 160 mm Collet chuck ER 40 with collet set 28 pcs. Fixed grain tip Grinding wheel flange with grinding wheel Wet grinding equipment
Internal cylindrical grinding machine, Tripet Swiss, 1991, Grinding slide. 0.5 - 30mm, Grinding depth: 50, Center height: 102, Axles: Z , Y, U, B, V, , autom. Chuck, ...
Key data: 450 mm, 200 mm
Surface grinding machine, used, Grinding area: 450x200x250mm, with magnetic plate, puller, holders, coolant device, ...
A Studer CNC universal cylindrical grinding machine in need of repair is offered. Mains voltage/frequency: 380V/50Hz, control: Siemens SINUMERIK System 3, drive system: Siemens SIMODRIVE, measuring system: Marposs E5. Including various accessories. Documentation available. An on-site inspection is possible.
ELB-Schliff SWB 015 VA II Surface Grinding Machine Type: Hydraulic surface grinding machine Manufacturer: ELB-Schliff Model: SWB 015 VA II Serial No.: 696710 Control type: Conventional / hydraulic Grinding length: approx. 1500 mm Grinding width: approx. 500 mm Table size: approx. 1500 x 500 mm Grinding wheel size: approx. Ø350 x 30 x Ø127 mm Table type: Magnetic grinding table Machine configuration: Horizontal spindle surface grinder Condition: Used This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-49190-25
max. grinding diameter: 175 mmgrinding length: mmworkpiece length: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1600 mm, 880 mm
CNC cylindrical grinding machine, (carousel) for internal, external and surface grinding. A lot of accessories, such as grinding wheels of different types and sizes. Retrofitted 2007 . Magnetic clamping plate dia 1500mm, Circumferential diameter 1800mm, Largest grinding diameter 1600mm Maximum grinding height 880mm Max. workpiece weight 5to Swivel angle of the grinding spindle: 90° left, 60° right
CNC cylindrical grinding machine, (carousel) for internal, external and surface grinding. A lot of accessories, such as grinding wheels of different types and sizes. Retrofitted 2007 . Magnetic clamping plate dia 1500mm, Circumferential diameter 1800mm, Largest grinding diameter 1600mm Maximum grinding height 880mm Max. workpiece weight 5to Swivel angle of the grinding spindle: 90° left, 60° right
Key data: 1600 mm, 880 mm
CNC cylindrical grinding machine, (carousel) for internal, external and surface grinding. A lot of accessories, such as grinding wheels of different types and sizes. Retrofitted 2007 . Magnetic clamping plate dia 1500mm, Circumferential diameter 1800mm, Largest grinding diameter 1600mm Maximum grinding height 880mm Max. workpiece weight 5to Swivel angle of the grinding spindle: 90° left, 60° right
Kellenberger, 57 U, Beautiful universal and tool grinder, under power Surface grinding, cylindrical and internal cylindrical grinding, tool grinding. X-600mm, Cross: 300, Vertical: 300 Swivel Range 360 Degree Table: 1030 x 214, rotatable, Workpiece Spindle: MK5, 50-420rpm, Center Height: 125/175mm Accessories : Grinding spindle holders, internal grinding spindle, rear grinding device, univ. vice, ... A lot of accessories: see pictures!
Kellenberger, 57 U, Beautiful universal and tool grinder, under power Surface grinding, cylindrical and internal cylindrical grinding, tool grinding. X-600mm, Cross: 300, Vertical: 300 Swivel Range 360 Degree Table: 1030 x 214, rotatable, Workpiece Spindle: MK5, 50-420rpm, Center Height: 125/175mm Accessories : Grinding spindle holders, internal grinding spindle, rear grinding device, univ. vice, ... A lot of accessories: see pictures!
Kellenberger, 57 U, Beautiful universal and tool grinder, under power Surface grinding, cylindrical and internal cylindrical grinding, tool grinding. X-600mm, Cross: 300, Vertical: 300 Swivel Range 360 Degree Table: 1030 x 214, rotatable, Workpiece Spindle: MK5, 50-420rpm, Center Height: 125/175mm Accessories : Grinding spindle holders, internal grinding spindle, rear grinding device, univ. vice, ... A lot of accessories: see pictures!
Manufacturer: SAACKE Model No.: UWIE Year: 2003 Condition: Used Stock No: 9484 Switch-on hours: 134460 h Hours: 15884 h X-axis travel: 340 mm Travel Y: 240 mm Travel distances Z-axis: 840 mm Maximum spindle speed: 10000 1/min Machine height: 2090 mm Machine length: 2450 mm Machine width: 2050 mm Machine weight: 3900 kg
: gebraucht : 2019 : 5505 : prompt, Zwischenverkauf v : Niederlande : 2670 €: 1 : 100 x 2.000 mm: 20 - 76,1 mm: 1 : 3 kW: 190 kgDEMO MACHINE / MINT CONDITIONThe lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table.Incl. 5 pcs. grinding belts, 1 pce. gr ...
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 6352 €: 122.59 €: 150 x 2.000 mm: 20 - 114,3 mm: 1 : 1 : 4 kW: 270 kgThe AL150 can be operated with two hand-wheels or a lever. The machine is equipped with both options.The AL150 can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°.The ALMI AL150 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine.The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds.All pipe grinders ...
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 7733 €: 149.25 €: 1 : 150 x 2.000 mm: 20 - 114,3 mm: 1 : 1 : 4 kW: 270 kgThe new AL150HS 2 in 1 machine: grinding belt and pipe grinder. High Speed Belt thanks to a unique transmission, up to 150ft/per second.The Benefits of the AL150HS: less dust/particules, less change of colour and longer belt life (2 to 3 times) due to high speed. The AL150HS can be operated with two hand-wheels or a lever. The machine is equipped with both options.The AL150HS can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°.The ALMI AL150HS can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of mate ...
: neu : ca. 2 Wochen ab Auftragse : Niederlande : 4785 €: 100 x 2.000 mm: 20 - 76,1 mm: 1 : 1 : 3 kW: 220 kgThe AL100U-02 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL100 U-02 can grind material from Ø 20 mm to Ø 76 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL100U-02 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipp ...
grinding length: 300 mmgrinding width: 500 mmworkpiece height: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cylindrical grinding machine manufactured in 2019. This TOS HOSTIVAR UB 25-1000 features a maximum swing diameter of 280 mm and a distance between centres of 1,000 mm. It includes a grinding head swivel range of ±45° and a rapid traverse speed of 2,000 mm/min. If you are looking to get high-quality grinding capabilities, consider the TOS HOSTIVAR UB 25-1000 machine we have for sale. Contact us for further details.
grinding diameter: 750 mmgrinding length: 5400 mmcentre height: 375 mmmax. workpiece diameter: 750 mmworkpiece weight: 10000 kgtable - swivable +/-: - °grinding wheel size: 750/650 x 75 x 305 mmgrinding wheel turining speeds: 750 U/minturning speed range - workpiece: 14,5 - 86 U/minmain drive motor: 15 kWworkpiece drive: 7,5 kWfeeds - fine adjustment: 0,00635 - 0,0508 mm/mintotal power requirement: - kWweight of the machine ca.: 27 tdimensions of the machine ca.: 13,5 x 3,4 mRefurbished 2023 and equipped with:- DRO- Table swivable- 9 x steadies- Coolant/Filtration TankMachine has had over 85000,-€ of retrofit work in 2023 including:-- replacement of air bearing liners-- 7 x steadies fully overhauled-- Overhaul of top table & centre heights of workhead & tailstock-- New electrical wiring & cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Surface grinding machine manufactured in 2016. This OKAMOTO ACC 52 SA features a grinding length of 500 mm and a grinding width of 200 mm, with a maximum table load of 200 kg. The hydraulic table feed rate reaches up to 27 m/min, and the spindle speed can go up to 3,500 rpm. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO ACC 52 SA machine we have for sale. Contact us for further details.
grinding length: 450 mmgrinding width: 250 mmworkpiece height: 275 mmtable surface area: 550 x 200 mmdistance spindle center to table: max. 400 mmtable speeds: 0 - 30 m/mincross feed: 0 - 60 mm/Hubrapid traverse cross: 1,2 m/mingrinding wheel size: ø 250 x 30 x ø 51 mmgrinding spindle speed: 1400 / 2800 U/mintotal power requirement: 4 kWweight of the machine ca.: 1 tdimensions of machine L x W x H: 1,55 x 1,23 x 1,80 mAccessories: magnetic plate 450 x 200 mm, grinding wheel with flange, wheel trueing attachmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6 Monate ab Auftragse : Taiwan : 67070 €: 1267.62 €: 800 mm: 610 mm: 800 x 400 mm: 800 x 400 mm: 810 mm: 5 - 25 m/min: 0.74 kW: 10 kVA kW: 3540 mm: 2080 mm: 2100 mm: 2900 kg: 980 mm: 350 kg: 355 x 50 x 127 mm: 0,001 mm: 500 - 1.800 U/min: 3,75 kW: 1.1 kW10.4", graphic NC control on a swivel arm with touchscreen for:Operating mode selectionCycle selection and program creationSurface grindingCross grindingPlunge grindingDressing with automatic compensationSemi-automatic balancing in the machineAutomatic spindle speed for constant surface speedSpindle load visualizationUnbalance controlGraphical status monitoringAlarm listaut. vertical feedservo drive for grinding wheel feed and table cross feedhardened slide ways in all 3 axes with needle rollerselectro-magnetic chuckcoolant equiptment with aut. paper filter and magnetic separatorautom. dressing attachment table mounted ...
1.800 € 
