used Tool-Grinding Machines for sale

Description: - Machine number: 8042757 - Grinding wheel diameter: approx. 175 mm - Grinding wheel width: approx. 30 mmweight approx.: 250 kg, dimensions (l x w x h) approx.: 900 x 700 x 1,400 mm

max. grinding diameter: / mmgrinding length: / mmworkpiece length: / mmtotal power requirement: / kWweight of the machine ca.: / trequired space: / mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: maximum stoke 130 mm approx. diameter 400 mm diameter 2 165 mm With contentweight approx.: 300 kg, dimensions (l x w x h) approx.: 1,000 x 800 x 1,600 mm

workpiece diameter: 60 mm, workpiece height max.: 60 mm, workpiece length: 500 mm, grinding wheel diameter max.: 190 mm, weight approx.: 800 kg, dimensions (l x w x h) approx.: 1,100 x 800 x 1,350 mm

Motor power: 3.7 kW Connection: 400 V Equipment: - Machine light - New connection cables - Various accessories - Various FAG abrasives

Description: Piece diameter 30 mm Sharpening capacity from 0.5 to 16 mm , Reliable right and left-handed cutting edges 2-3 , Thinning angle adjustment from 0 to 90°  ,weight approx.: 120 kg, dimensions (l x w x h) approx.: 1,200 x 800 x 1,500 mm

Description: Minimum/maximum sharpening 0.5 - 16 mm Head angle 80° - 180° Cutting edge rake angle 0 - 18° Second inclination angle 30° Third inclination angle 50° Unlimited tip length grinding wheel dimensions 70 x 30 x 25 mm 7100 rpm 0.18 kWweight approx.: 120 kg, dimensions (l x w x h) approx.: 800 x 1,300 x 1,600 mm

Description: Diameter of disc each 150 mm , With two twist drill holder weight approx.: 30 kg, dimensions (l x w x h) approx.: 500 x 500 x 1,200 mm

Lid S1 Tool Grinding Machine

Techn Data: Clamping range, Tips height of the part head, without /with swivel plate 65/95mm Largest cutter pass-through between the peaks 130mm Largest distance between the tips 250mm Largest cutter diameter at flying clamping 320mm Inner cone partial scopic spindle standard cone 40 or Morse 4 Largest bore of collet pliers 25mm Motion Longitudinal movement of the partial slide 260mm Cross-movement of the cross-loop guide Coarse 200mm Cross-movement of the cross-sled geese Fine 50mm Height adjustment of the vertical slide 50mm Swivelability of the table slide 360° Swivelcapability of the vertical slide guide 360° Swivel lingability of the swivel bearing around axis persethering to the partial spindle 220° Swivelability of the partial head slide guide around axis parallel to the partial spindle 30° Largest grinding length for spiral grinding 100mm Smallest and larg ...

BN 102 C Producer Tos Swing 280 mm Distance between centres 630 mm Cross table adjustment 250 mm Longitudinal table adjustment 510 mm Vertical milling head adjustment 290 mm Machine weight 1000 kg

Control NUM 1060 / II Working distances: transverse axis x = 360 mm, height adjustment y = 150 mm, feed axis z = 230 mm, swivel axis B +/-100° Inclination of the grinding spindle from – 15° to +25° Rapid traverses x/y/z 10 m / min Grinding wheel speeds 1,000 rpm – 6,000 rpm Grinding wheel diameter max. 250 mm Machine weight 4.5 t Accessories: Ewamatic 3D measuring system for orienting and measuring the tools

Description: with an upper and lower grinding motor , grinding wheel diameter 63 mmweight approx.: 200 kg, dimensions (l x w x h) approx.: 700 x 800 x 1,500 mm

Sell a tool grinding machine especially for grinding stools or similar. One side is equipped with a chuck that can be adjusted in all directions. The whole thing is on a cross support Dimensions 16001000'1500mm High Clamping range chuck 4040mm Grinding wheels diameter 175mm50mm and 320mm50mm Voltage probably 110V

Description: Series No. 384.21 Voltage 38OV Without CE certificateweight approx.: 150 kg, dimensions (l x w x h) approx.: 1,100 x 1,100 x 1,600 mm

Description: 380 volt Table support surface approx. 350 x 140 mm without other accessories without CE certificateweight approx.: 250 kg, dimensions (l x w x h) approx.: 1,100 x 1,000 x 1,500 mm

Specifications: - Grinding wheel diameter approx. 175 mm - Disc speeds 2820 rpm - Support table left height adjustable + laterally movable + rotatable -Lighting - Drive 400 V / 0.75 kW - Space requirement approx. W 1050 x H 1350 x D 650 mm - Weight approx. 120 kg

Description: Manual grinding machine for grinding wheels complete with water system for humidification , Rotation speed 2800 rpm Complete with 6 grinding wheels of various sizes , Power HP 1.5 ,weight approx.: 200 kg, dimensions (l x w x h) approx.: 1,400 x 1,250 x 600 mm

max. grinding diameter: 250 mmgrinding length: 450 mmworkpiece length: 600 mmtable-size: 950 x 120 mmlongitudinal feed: 300 / 500 mmgrinding spindle speeds: 2200-3500-5200 U/min.tool length - max.: 600 mmdisk milling cutter diameter: max. 360 mmgrinding spindle - swivable: 350 °grinding head crossways adjustable: 230 mmgrinding head vertical adjustable: 250 mmmax. dia. of grinding wheel: 160 mmtotal power requirement: 1,8 kWweight of the machine ca.: 850 kgdimensions of the machine ca.: 1,3 x 2 x 1,4 mCondition: ready for operation: Video available on our website.: Electric 380 Volt: Seperate hydraulic equipment: Hydr. table feed: Diverse tools: Internal head: SK 50 Tool grinding machine with hydr. Longitudinal table drive up to 300 mm.Many accessories:- Spiral grinding device with guide ruler- Dressing device- Relief grinding device- Cylindrical grinding device- internal grinding ...

weight approx.: 250 kg, dimensions (l x w x h) approx.: 800 x 800 x 1,600 mm

Tool grinding machine is equipped with two grinding wheels. Of which is a diamond disc. The two tables can be adjusted by loosening the clamping lever in their angles. The tool is set by a scaled handwheel. On one side, a swinging table on the other side is a handwheel. A coolant pump is installed in the foot

Description: HARD DOEBLI DM 4 550 Tool Grinding Machineweight approx.: 550 kg, dimensions (l x w x h) approx.: 1,200 x 800 x 1,800 mm

max. grinding diameter: 279 mmgrinding length: 600 mmworkpiece length: 750 mmtable-size: 1050x150 mmlongitudinal travel: 600 mmcross travel: 230 mmvertical movement: 250 mmspindle turning speed range: 2000-6000 U/minweight of the machine ca.: 1 tAccessories: Universal viceTable adjustment only possible from front of the machinemore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. grinding diameter: 279 mmgrinding length: 600 mmworkpiece length: 750 mmtable-size: 1050x150 mmlongitudinal travel: 600 mmcross travel: 230 mmvertical movement: 250 mmspindle turning speed range: 2000-6000 U/minweight of the machine ca.: 1 tAccessories: Magnetic plate 600x200mmmore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: machine number 90156, motor 0.55 kW, mounted on machine standweight approx.: 70 kg, dimensions (l x w x h) approx.: 600 x 600 x 1,400 mm

US 2305 young, with lots of accessories

Beautiful universal and tool grinding machine, energized Surface grinding, cylindrical and internal cylindrical grinding, tool grinding. X-600mm, Transverse: 300, Vertical: 300 Swivel range 360 degrees Table: 1030 x 214, rotatable, Workpiece spindle: MK5, 50-420rpm, center height: 125/175mm Accessories : Grinding spindle holders, Internal grinding spindle, Back grinding device, Univ. vice, ... A lot of accessories: see pictures!

CONTROLS  conventional TECHNICAL SPECIFICATION  Grinding head: spindle speed: 2000 /min  .. max.: 6000 /min  Mounting table length: 1030 mm  .. width: 214 mmELECTRICAL SPECIFICATIONS  mains voltage: 380 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1850 mm  space requirements -front/back-: 1400 mm  total height: 1400 mm  total weight approx.: 1250 kgSpitzenhöhe: 125mmSchleifdurchmesser: max. 250mmSchleifscheibendurchmesser max. 250mmSchleifkopfvertikalverstelltung: 300mmQuerweg des Schleifkopfes: 300mmTischschenkbar (Kopf) 90 / 360 GradAusstattung:Sehr, sehr viel Zubehör

max. grinding diameter: 250 mmgrinding length: 600 mmworkpiece length: 780 mmtable-size: 1030x214 mmspindle turning speed range: 2000-6000 U/minweight of the machine ca.: 1.2 tHydraulic executionUniversal dividing headRelief grinding attachmentHelical grinding attachmentLots of accessorieswww.marcels-maschinen.c The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1640 weight: 280 kg: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: 380 volts With table and accessoriesweight approx.: 80 kg, dimensions (l x w x h) approx.: 900 x 700 x 1,300 mm

Description: Technical details: Conventional control type, x-travel 200 mm, y-travel 200 mm, table length 600 mm, table width 400 mm, total power requirement 2 kWweight approx.: 1,000 kg, dimensions (l x w x h) approx.: 1,200 x 1,000 x 1,600 mm

General: Year of construction 1999 Speed 4,500 rpm Dimensions 500 mm x 530 mm x 1230 mm Weight approx. 150 kg Other equipment and included accessories: Machine light Sub-apparatus Various collets

CNC Tool grinder Makino Seki Mod.CNJ5u-H Year: 2009 Excellent condition, occasionally used by Samsung Electronics.

Merz tool grinding machine - Height: 120 cm - Width: 40 cm - Depth: 60 cm - Weight: 70 kg Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices.

Control PCNC 5 axes grinding diameter 250 mm Grinding length 340 mm Workpiece diameter 250 mm Workpiece length 450 mm Spindle speed 8000 min-1 Schlefkörper diameter 150 mm Weight 2160 kg

Control PMAC control 5 axes Travel X/Y/Z 400/310/305 mm A-/ C-axis 360°/224° Workpiece diameter 250 mm Grinding length 400 mm Spindle speed 8000 min-1 Pick-up workpiece loader 37-72 workpieces

Description: with accessories consisting of , Collets, cup wheels, diamond wheels grinding wheel diameter max.: 100 mm, weight approx.: 80 kg, dimensions (l x w x h) approx.: 550 x 300 x 1,200 mm

Description: Including bench with contentweight approx.: 50 kg, dimensions (l x w x h) approx.: 800 x 600 x 1,100 mm

Description: Including workbechweight approx.: 70 kg, dimensions (l x w x h) approx.: 500 x 900 x 1,300 mm

weight approx.: 70 kg, dimensions (l x w x h) approx.: 600 x 500 x 1,400 mm

weight approx.: 300 kg, dimensions (l x w x h) approx.: 1,200 x 800 x 1,500 mm

weight approx.: 300 kg, dimensions (l x w x h) approx.: 1,200 x 800 x 1,500 mm

Description: Technical details: grinding wheel diameter 175 / 60 / 51 mm, number of stations 2 pieces, revolutions per minute 2900 rpm, total power requirement 0.5 kWweight approx.: 100 kg, dimensions (l x w x h) approx.: 900 x 700 x 1,200 mm

Description: 380 volt table support surface type 630 x 130 mm without CE certificateweight approx.: 380 kg, dimensions (l x w x h) approx.: 800 x 1,200 x 1,300 mm

Description: converted to a chamfering machine , Table dimension 800 x 150 mm , Table travel approx. 600 mm , With right and left rotationweight approx.: 450 kg, dimensions (l x w x h) approx.: 1,400 x 900 x 1,200 mm

Tool grinding machine Make: SAACKE

Inv. Num. : 5954 Type: UW1E Producer: SAACKE Created: 2002 Parameters: Minimum spindle speed: 2000 1/min Maximum spindle speed: 10000 1/min Manual feed length in the X-axis: 340 mm Manual feed length in the Y-axis: 260 mm Manual feed length in the Z-axis: 840 mm W-axis: 260 pcs Workpiece diameter: 300 mm Tip stroke: 152 mm Total power requirement: 17 kW Mounting cone: ISO 50 Machine height: 2090 mm Machine length: 2450 mm Machine width: 2050 mm Machine weight: 3900 kg Restoration: 2013 - Replacement of the measuring ruler and the MDLU unit 2007 - Replacement of the Z-axis and Y-axis 2006 - W-axis replacement and Z-axis ball screw replacement 2005 - Replacement of the grinding spindle incl. belt

Description: Tool grinding machine with hydraulic table drive and eccentric plate Year of manufacture: approx. 1970 estimated Grinding spindle 80x240mm Motor 1.1 kW 2800 rpm without circuit diagram and documentsweight approx.: 1,400 x 1,200 x 1,500 kg, dimensions (l x w x h) approx.: 1,400 x 1,200 x 1,500 mm

Description: Tool grinding machine with hydraulic table drive and eccentric plate Year of manufacture: approx. 1970 estimated without grinding spindle D.80 Motor 0.6/1.3 kW 1400/2800 rpm with operating instructionsweight approx.: 1,400 x 1,200 x 1,500 kg, dimensions (l x w x h) approx.: 1,400 x 1,200 x 1,500 mm