Manufacturer:
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.

Manufacturer:
(Category: 104-313)

grinding machines / Sawblade Sharpening Machines
date: 17.02.2024 add to watchlist
item-No.: 162831307
New in: 2023

new

Seller: Eble Mechatronic
Location: Land-de

add to watchlist

Key data: 330 kg, 600 mm, 24000 1/min.

New saw blade grinding machine - chip splitter groove grinding machine made Eble, Grinding range approx. 120-600 mm diameter Tooth pitch saw blade maximum approx. 22 mm Control: Siemens PLC with automatic limit shutdown after grinding Grinding spindle: HF, 24000 1/min. Cooling: Minimum quantity lubrication Accessories: - 1 set of reducer rings 16x20,22,25,32,40,50 mm - Circuit diagrams, operating instructions - Grinding wheel 30x0.3x6 mm, CBN Operating voltage: 400 V

grinding machines / Sawblade Sharpening Machines
date: 01.03.2024 add to watchlist
item-No.: 162757906
New in: 2023

new

Seller: Eble Mechatronic
Location: Land-de

add to watchlist

Key data: 660 kg, 630 mm, 40000 1/min.

Fully automatic chip splitter - groove grinding machine for HSS - saw blades: Functionality: -Insertion / clamping of the saw blade -Enter number of teeth -Press Start in the touch screen - After the Groove grinding, remove the finished saw blade... ready. No further adjustment work necessary, as the tooth pitch, tooth depth, saw blade diameter is measured FULLY automatically by laser in the shortest possible time! All grinding parameters such as grinding speed, grinding wheel width, Groove depth, groove spacing, etc. are specified in advance via the control software / touch screen can be pre-set as required! - Saw blade range: 160 - 630 mm diameter - Tooth pitch from 2.5 mm or larger - Saw blade thickness: max. 8 mm - Grinding spindle: electronically controlled HF spindle (40000 rpm) incl. sealing air connection ! - Grinding wheel: CBN/diamond - 30 mm diameter, ...

grinding machines / Sawblade Sharpening Machines
date: 20.04.2023 add to watchlist
approved
dealer
item-No.: 143114226

used

check Seller: Eble Werkzeugmaschinen
Location: 71665 Vaihingen/Enz - Horrheim, Im Pfäd Land-de

add to watchlist

Machine for chamfering of HSS and segment circuit saegen - Saegeblatt: 80 - 910 mm - Grinding wheels: 200 x 32 mm - Weight: approx. 1800 kg - Full cladding - integrated wet grinding device - Signal lamp for displaying the end of work - Halogen lamp - Central lubrication - Accessories - Operating instructions

grinding machines / Sawblade Sharpening Machines
date: 11.04.2023 add to watchlist
approved
dealer
item-No.: 143114694

used

check Seller: Eble Werkzeugmaschinen
Location: 71665 Vaihingen/Enz - Horrheim, Im Pfäd Land-de

add to watchlist

Circular saw blade Anfasautomat The BK 450 circular blade contact machine automatically handles the lateral chamfering or bending of HSS saegee blowers up to 450 mm in diameter. The special feature of the machine is that it is connected to two separate grinding units and thus the saege leaf is fasted on both sides at the same time. This means lower ruest and faster grinding times. Diameter range: 50 - 450 mm Tooth pitch: 2 - 12.5 mm Saegeblatt thickness: max. 4 mm CBN (for groove grinding): 25x 8 and 30x 8 mm CBN or bakelite: 60 x12 mm Weight: approx. 115 kg Dimensions (L x W x H): 735 x 630 x 1350 mm

grinding machines / Sawblade Sharpening Machines
date: 18.04.2024 add to watchlist
approved
dealer
item-No.: 163577578
New in: 2004

used

check Seller: SuS GmbH
Location: cloppenburg Land-de

add to watchlist

Suitable for automatic grinding or re-serration and chamfering of HSS and segment saw blades as well as solid carbide saws with ceramic grinding wheels and deep grinding with CBN or diamond grinding wheels., Accessories:, Total enclosure,, Sawblade magazine with 3 saw blade stacks, each with a stack height of 250 mm,, Device for automatic chamfering (smallest sawblade diameter: 100 mm),, Automatic threading of the grinding wheel,, Automatic central lubrication,, Coolant system 400 L with coolant tank,, Integrated machine light,, 1 mist extractor,, 1 set of operator tools,, 3 sawbalde pins for loader., Saw diameter: 40-710mm, Tooth pitch: 1 - 55mm, Number of teeth: 2 - 998, Saw blade thickness: max. 8 mm, Grinding wheel diameter: 200x32mm, Connected load: 10kW (400V / 50Hz), mass: about 3200 kg, Dimensions: L x W x H = 1198 x 1750 x 2015 mm, colour: blue/grey RAL 7047 / blue RAL 250-50-20 ...

grinding machines / Sawblade Sharpening Machines
date: 15.04.2024 add to watchlist
approved
dealer
item-No.: 157384741
New in: 1989

used

checkTOP Seller: ZOMA Maschinenhandel
Location: Land-de

add to watchlist

Manufacturer Producer Saacke Typ type UW2 CNC Year of construction Construction year 1989 Steuerung control Sinumerik Machine size machine size 3500x3000x2500 mm Spannung Voltage 400 V Machine weight machine weight approx. 2.5 t

grinding machines / Sawblade Sharpening Machines
date: 11.04.2023 add to watchlist
approved
dealer
item-No.: 143114703

used

check Seller: Eble Werkzeugmaschinen
Location: 71665 Vaihingen/Enz - Horrheim, Im Pfäd Land-de

add to watchlist

Schmidt Tempo ASG 1400 Saw blade grinding machine up to 1,400 mm Overhauled and repainted â?¢ Saw blade holder of 250 mm with centering bolt 32 mm with hydraulic clamping nut â?¢ 1 pc saw blade support â?¢ 1 set of centering rings â?¢ 1 pc. grinding wheel flange 150 mm diameter, 32 mm bore â?¢ Large halogen lamp, good illumination, reduced heat formation â?¢ New, up-to-date control panel â?¢ Connection to central dust extraction â?¢ Interchangeable wheel scissors with the required interchangeable wheels for common number of teeth

grinding machines / Sawblade Sharpening Machines
date: 11.04.2023 add to watchlist
approved
dealer
item-No.: 143114713

used

check Seller: Eble Werkzeugmaschinen
Location: 71665 Vaihingen/Enz - Horrheim, Im Pfäd Land-de

add to watchlist

Schmidt Tempo ASG 2000 Saw blade grinding machine up to 2,050 mm technically overhauled and repainted in 2019. Equipment and accessories: â?¢ Saw blade holder of 250 mm with centering bolt 32 mm, hydraulic clamping nut â?¢ 1 pc saw blade support â?¢ Centering rings bore 32 mm, outer diameter as required â?¢ 1 pcs grinding wheel flange 150 mm Diameter, 32 mm bore â?¢ Large working light â?¢ Interchangeable wheel scissors with interchangeable wheels for need. Tooth numbers Technical data: â?¢ Grinding range 315-2050 mm â?¢ Number of teeth 16 - 1000 â?¢ Tooth height 1 - 50 mm â?¢ Saw blade thickness maximum 20 mm â?¢ Stroke numbers continuously 21-126 Z/min â?¢ Connection value approx. 4.5 kW (400V / 50 Hz)

grinding machines / Sawblade Sharpening Machines
date: 11.04.2023 add to watchlist
approved
dealer
item-No.: 143114749

used

check Seller: Eble Werkzeugmaschinen
Location: 71665 Vaihingen/Enz - Horrheim, Im Pfäd Land-de

add to watchlist

Saw blade grinding machine up to diameter 3,000 mm Model Schmidt Tempo ASG 3000 2019 technically overhauled and repainted â?¢ Grinding range 315-3050 mm â?¢ Number of teeth 16 - 1000 â?¢ Tooth height 1 - 50 mm - saw blade thickness up to 20 mm â?¢ Stroke numbers continuously 21-126 Rpm - Connection value approx. 4.5 kW (400V / 50 Hz) â?¢ Saw blade holder of 550 mm with centering bolt 32 mm with hydraulic clamping nut â?¢ 1 pc saw blade support â?¢ 2 centering rings bore 32 mm outer diameter as required â?¢ 1 pcs grinding wheel flange 150 mm diameter, 32 mm bore â?¢ Large LED light, good illumination, reduced heat formation â?¢ Interchangeable wheel scissors with the interchangeable wheels for common number of teeth Illustrations: Schmidt Tempo ASG 2000.  ...

grinding machines / Sawblade Sharpening Machines
date: 20.04.2023 add to watchlist
approved
dealer
item-No.: 143114228

used

check Seller: Eble Werkzeugmaschinen
Location: 71665 Vaihingen/Enz - Horrheim, Im Pfäd Land-de

add to watchlist

2019 technically overhauled and repainted. - Grinding range of 20 to 400 mm with grinding wheel of 200 mm - up to 450 mm with smaller grinding wheel - Zaehne numbers 20 to 999 - Tooth ahehes 0 to 20 mm - Grinding wheel diameter max. 200 mm - Stroke numbers 40 to 180 - Weight approx. 990 kg - Automatic grinding wheel delivery via electronic preselection; max. removal 4 mm. - Removal sequence according to zaehne number preselection in 0.02 mm increments - Automatic grinding wheels profiling device with automatic. Compensation of removal. - Cycle can be pre-predictable according to zaehne number. - Leaf stuetze - Central lubrication - Accessories - Operating instructions and operator tool

grinding machines / Sawblade Sharpening Machines
date: 11.04.2023 add to watchlist
approved
dealer
item-No.: 143114763

used

check Seller: Eble Werkzeugmaschinen
Location: 71665 Vaihingen/Enz - Horrheim, Im Pfäd Land-de

add to watchlist

Saw blade grinding machine Schmidt Tempo ECE 45 2019 technically overhauled CBN deep-cut process For regrinding and for the production of circular saw blades with angular and arched tooth according to tooth shape A, AW, B, BW, and C according to DIN 1840 for circular saw blades from 20 mm to 550 mm. â?¢ Clock and grinding time display â?¢ automatic, motorized central lubrication â?¢ Centering holder with centering bolts 16 mm . . . . . . . . . . . . . . . . . . â?¢ Clamping nut with mech. Clamping force reinforcement â?¢ Saw blade holder â?¢ Preparation for grinding with oil â?¢ Centering rings as needed â?¢ LED machine light â?¢ Program for round grinding â?¢ Reporting light â?¢ Tool set

grinding machines / Sawblade Sharpening Machines
date: 17.02.2024 add to watchlist
item-No.: 162770414

used

Seller: Eble Mechatronic
Location: Land-de

add to watchlist

Key data: 980 kg, 550 mm, 6000 1/min.

Machine was completely disassembled, mechanical wear parts renewed, repainted! Features: -For resharpening and re-gearing of HSS segments- CV and solid carbide saws in the advantageous CBN deep grinding process - Grinding of Vario tooth - Grinding of special teeth - Freely changeable tooth geometry - Grinding repair segments of segmental teeth - Infinitely variable rake and clearance angle - Advanced machine protection hood Key Benefits: - Short grinding times with high surface quality due to stable machine design combined with adapted clamping flanges for the saw blades and high drive power. - Consistent, repeatable quality through CNC control (2 axles) - Powerful grinding wheel drive Specifications: - Saw blade diameter approx. 20-550 mm - Maximum saw blade thickness 6 mm - Working speed 3-75 teeth/minute - Cooling 5 bar at 40L./min. - Grinding whee ...

grinding machines / Sawblade Sharpening Machines
date: 11.04.2023 add to watchlist
approved
dealer
item-No.: 161229124

used

check Seller: Eble Werkzeugmaschinen
Location: 71665 Vaihingen/Enz - Horrheim Land-de

add to watchlist

Saw blade grinding machine Schmidt Tempo ECE 45 - 4 Technically obsolete in 2023 CBN deep section with A-Pos and automatic chamfering Prepared for the use of grinding oil, so that a much longer service life of all aggregates is guaranteed in contrast to working with emulsion. The automatic measurement of the tooth position for regrinding and chamfering is carried out via the AUTO POS system. A short video of a calibration process can be viewed under the link. Car. Fire extinguishing system Kraft und Bauer For regrinding and production of circular saw blades with angle and arch tooth according to tooth shape A, AW, B, BW, and C according to DIN 1840 for circular saw blades from 20 mm Ø to 550 mm Ø. Cycle and grinding time display automatic central lubrication Control cabinet cooling Centering holder with centering bolt 16 mm Ø Tension nut with mec ...

grinding machines / Sawblade Sharpening Machines
date: 20.04.2023 add to watchlist
approved
dealer
item-No.: 143114678

used

check Seller: Eble Werkzeugmaschinen
Location: 71665 Vaihingen/Enz - Horrheim, Im Pfäd Land-de

add to watchlist

Saw blade grinding machine for diameters up to 920 mm The machine can be inspected and tested under electricity, upon request. Saegeleaf diameter: 200 to 920 mm Saegeleaf width: up to 10 mm Number of teeth: 20 to 999 Tooth depth: 0 to 25 mm Tooth pitch: max. 50 mm Grinding wheel diameter: 300 mm Weight: 1,700 kg Saw blade diameter for bevels: 280 - 920 mm

grinding machines / Sawblade Sharpening Machines
date: 20.04.2023 add to watchlist
approved
dealer
item-No.: 143114220

used

check Seller: Eble Werkzeugmaschinen
Location: 71665 Vaihingen/Enz - Horrheim, Im Pfäd Land-de

add to watchlist

2019 technically overhauled CBN or DIA grinding in deep grinding Cover / Schalldaemmhaube with viewing window Interior lighting by halogen lamp Separate control cabinet with screen display and operator guidance Special tooth shapes: 10 forms freely programmable and stored Automatic, motorized central lubrication 1 piece of grinding wheel flange Centering pad with bolts ( x16 mm) 1 set centering rings Normal access and user manual Operating tool Colour pigeon blue Grinding range of 60 - 520 mm Saegeleaf thickness max. 6 mm Zaehne numbers 20 - 999 Saegeleaf holder bolt 16 (8) mm Grinding wheel diameter 200 mm Maximum tooth height 32 mm Grinding wheels bore 32 mm Grinding wheel drive 4 kW Grinding wheels Speed 5730 rpm Weight approx. 1150 kg

grinding machines / Sawblade Sharpening Machines
date: 20.04.2023 add to watchlist
approved
dealer
item-No.: 143114214

used

check Seller: Eble Werkzeugmaschinen
Location: 71665 Vaihingen/Enz - Horrheim, Im Pfäd Land-de

add to watchlist

Saw blade grinding machine Schmidt Tempo ECT 502 Handling with robot and 4 charging stations for neutooth and re-sharpening of HSS saw blades. With CBN deep grinding for the highest quality and cost-effectiveness and robot loading for manless grinding. 2019 technically overhauled and prepared for grinding with oil. Grinding range: 60 to 520 mm Saw blade thickness: max. 6 mm Number of teeth: 20 to 999 - Automatic charging system with industrial robot - AUTOPOS: automatic positioning of the saw blade to the grinding wheel - TEMPOTRONIC control - Special tooth shapes: 10 forms freely programmable and stored - Full encapsulation - Separate control cabinet - Data entry for batch processing via PC - Integrated halogen lamp - Automatic central lubrication - Operating instructions and operating tools

grinding machines / Sawblade Sharpening Machines
date: 20.04.2023 add to watchlist
approved
dealer
item-No.: 161289884

used

check Seller: Eble Werkzeugmaschinen
Location: 71665 Vaihingen/Enz - Horrheim Land-de

add to watchlist

6-axis circular saw blade grinding machine with loading robot Schmidt Tempo Freestyle -inclusive. automatic fire extinguishing system Kraft & Bauer The machine is suitable for regrinding and re-gearing of all tooth shapes, cutting and angles with automatic threading, as well as for automatic chamfering in the deep grinding process using CBN or diamond grinding wheels. The machine is technically overhauled in our company and is prepared for the use of grinding oil, so that a much longer service life of all units is guaranteed in contrast to working with emulsion. All mechanical components such as linear guides, ball screw, grinding spindle. Bearings, etc., as well as wear parts are replaced. Saw blade diameter 20 - 550 mm Saw blade thickness 6 mm Working speed 3 - 75 strokes/min. Number of Teeth 999 Max. Saw blade stack height 180 mm

grinding machines / Sawblade Sharpening Machines
date: 11.04.2023 add to watchlist
approved
dealer
item-No.: 143114759

used

check Seller: Eble Werkzeugmaschinen
Location: 71665 Vaihingen/Enz - Horrheim, Im Pfäd Land-de

add to watchlist

Saw blade grinding machine with car. bevel up to 1050 mm by CBN or DIA cut in deep grinding process Schmidt Tempo XL Grinding range 80 to 1050 mm Saw blade thickness up to 10 mm Mounting bolt 16/32 mm Grinding wheel diameter 200 mm Spindle rotary screw up to 5,700 rpm Working speed 3 to 50 z/min Integrated coolant device Dimensions 1,400 x 1,750 x 2,250 mm Weight approx. 1,700 kg

grinding machines / Sawblade Sharpening Machines
date: 20.04.2023 add to watchlist
approved
dealer
item-No.: 143114682

used

check Seller: Eble Werkzeugmaschinen
Location: 71665 Vaihingen/Enz - Horrheim, Im Pfäd Land-de

add to watchlist

HM saw blade grinding machine Vollmer CHD 250 Suitable for automatic grinding of HM circular saw blades on the chest and back in a tension. All known tooth geometries (flat, alternating, trapezoidal tooth, etc.) can be sanded automatically and in a drain. 2019 technically overhauled and repainted Technical data: Saw blade diameter: 80 - 840 mm Bore diameter: 10 - 220 mm Sheet thickness up to: 14 mm Tooth pitch: 8 - 120 mm Chip angle: - 35° to + 40° Free angle: 5° to 45° Inclined grinding tooth back: 45° Inclined tooth brush: 30° Grinding wheel chest: 200 x 32 mm Grinding wheel back: 125 x 32 mm Dimensions W x D x H: 2295 x 1743 x 2050 mm Weight approx.: approx. 2000 kg Connection value: 400 V / 50 Hz / 5.6 kVA

grinding machines / Sawblade Sharpening Machines
date: 18.04.2024 add to watchlist
approved
dealer
item-No.: 163476706
New in: 2021

used

check Seller: SuS GmbH
Location: cloppenburg Land-de

add to watchlist

Suitable for automatic grinding of tooth face and tooth back on carbide-tipped circular saw blades in one clamping. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass., Accessories:, Total enclosure,, Coolant system,, Automatic loading system HS # 172 (workpiece weight up to 5 kg, stack height up to 180 mm),, Automatic set-up of the machine (automatic saw infeed axis, saw stop for diameter control, audio probe Measuring device for automatic probing, etc.),, Standard software package for tooth geometries after tooth shape summary,, Software for grinding saw blades with group teeth, with different tooth geometries,, Software for replaced and broken teeth,, Data entry station for the sawblade data, with touchpanel,, Device for internal coolant supply using oil,, Coolant collecting pan including grids for the machine,, Coolant co ...

grinding machines / Sawblade Sharpening Machines
date: 18.04.2024 add to watchlist
approved
dealer
item-No.: 163244726
New in: 2023

used

check Seller: SuS GmbH
Location: cloppenburg Land-de

add to watchlist

Suitable for automatic grinding of tooth faces and tooth backs on carbide-tipped circular saw blades., Accessories:, Total enclosure including coolant system,, Motorized setting of the rake and clearance angle,, Preselection of the direction of rotation of the grinding wheel and automatic change of direction of rotation,, Grinding speed and grinding path stepless adjustable,, Operating system modified Windows version,, Storage of approx. 4,000 programs possible,, Standard software package for tooth geometries according to the program overview,, Program for grinding saw blades with group teeth, with different tooth geometries,, Program for newly fitted and broken teeth,, Software package for multi-surface machining on the positive chip and flank face,, oscillating grinding on the face and top,, Automatic grinding wheel compensation,, Automatic central lubrication,, Feed pawl 2 mm,, 1 sawb ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information