Round Grinding Machines used for sale (72)

1 used: Internal cylindrical grinding machine • Manufacturer: OVERBECK, Herborn • Model: 250 I-HA • Factory No.: 261991 • Year of construction: 1971 • Clamping diameter: max. 140 mm • Grindable bore length: max. approx. 150 mm • Grindable bore diameter: max. approx. 0.8-80 mm Accessories: without internal grinding spindle without drive motor for internal grinding spindles Deflection pulleys for spindle drive available (Machine was installed by the previous owner with a pneumatic spindle operated) Flat grinding device, can be swivelled in by hand Coolant tank with pump

Stankoimport 3Y131 Cylindrical Grinding Machine Type: Cylindrical grinding machine Manufacturer: Stankoimport Model: 3Y131 Grinding length: 2000 mm Grinding stone wheel: 500 mm Main Motor Power: from 3 kW to 15 kW Dimensions (L x W x H): approx. 4150 x 2350 x 2150 mm Grinding wheel speed: Adjustable, normally between 1000 and 3000 RPM Weight: Between 3000 kg and 8000 kg Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-11

1 CNC cylindrical grinding machine Make: Buderus Model: CNC-335-I-A Year of Make: 2001 CNC control: Siemens 840C Bore machining range: 150 mm Maximum workpiece depth: 100 mm Largest external processing area: 150 mm Largest swing diameter over table: 310 mm Workpiece spindle speeds: 0 – 3000 rpm. X-axis table lifts: 1050 mm Z-axis: 300 mm Infinitely adjustable feed speed: 0.01 - 10 mm/min Stroke-dependent: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Machine weight approx.: 7.5 to.

140mm discharge max Machine ready for transport Auction-ID: A1-44905-81

1 cylindrical grinding machine Make: Tschudin Model: HTG 400 Year of Make: 1967 Center width: 400 mm Tip height: 100 mm Cone: MK4 Spindle speed: 70 – 500 rpm. Max. table travel: 420 mm Table swivel by 15° Grinding wheel: Ø 300 mm Retractable Tailstock MK3 Grinding spindle – Disc diameter: 300 mm – Disc width: up to 50 mm – Disc bore: 127 mm – Disc speeds: 1500 rpm; 1700 rpm; 1900 rpm Weight approx.: 1.5 tons.

Three-phase asynchronous motor, 2800 rpm, 220 V.Serial: 143Estimated weight: 75 kg Approximate dimensions: 1200x800xh1500 mm Auction-ID: A7-44996-146

Key data: 350 mm, 1500 mm, 175 mm

1 Outside – Cylindrical Grinding Machine Make: Fortuna Model: F 13 S Year of Make: 1980 Grinding length: 1500 mm Tip height: 175 mm Grinding diameter: 350 mm Grinding wheel diameter: 500 mm Equipment / Accessories: Lynettes Various grinding wheels Coolant Setup Paper Belt Filter

Double grinder: 2800 rpmEstimated weight: 75kgApproximate dimensions: 1200x800x1300 mm Auction-ID: A7-44996-144

Machine no. 2037.04 See photos !

Two-disc grinderEstimated weight: 30 kg Approximate dimensions: 400x800x1200 mm Auction-ID: A7-44996-145

2 x cylindrical grinding machines Kellenberger type: kel varia Year of manufacture: 1997 and 1995 more technical data and more pictures on request.

Cincinnati Cylindrical Grinding Machine Type: Cylindrical grinding machine Manufacturer: Cincinnati Bushing diameter: 120 mm Distance between points: 1000 mm Arbor hole with cooling system: 20 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-9

Studer S20 cylindrical grinding machine

grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 175 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCompletely overhauled in 2013Heavy duty workpiece headstocktailstockWithout chuck and without bezel in the photoKelco 90 controlThe machine can be viewed in operation at the customers premises from 2025 up to and including January 2026.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

These are a few key data. - CNC universal cylindrical grinding machine WUG 21 basic machine from CNC-Technik Weiss. (The WUG 21 is a Karstens machine bed on which the CNC is built.) - Year of construction 2008 / max. single-shift - 1000mm tip width - Workpiece headstock and tailstock MK4 - Disc Ø up to 500mm - Lens position 26.5° inclined - Grinding wheel drive with programmable SUG - Grinding headstock can be swivelled manually on air cushions - Window right - Internal grinding device mounted on the back incl. dressing device - Eckelmann control system - DIN programming - Cycle programs - Manual grinding, yes - Automatic dressing - Marposs structure-borne sound for external grinding wheel incl. software package - Grinding wheel spindle and workpiece spindle with V-belt drive

Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...

1 gebr. Cylindrical grinding machine, Fabr. Cincinnati, Type R 75, Built in 1971 Tip height 130 mm Grinding length 760 mm Spindle bore 38 mm Grinding wheel diameter 300 mm, width 40 mm Workpiece weight 75 kg. Max. Grinding spindle can be swivelled twice

grinding diameter: 630 mmgrinding length: 3000 mmworkpiece weight: 2500 kggrinding wheel diameter: 750 mmvoltage: 400 VControl: total power requirement: kWweight of the machine ca.: tTable Swivel 5° - 0° - 5°Internal Grinding AttachmentMarpossSteadiesDresserCoolantThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solu ...

Key data: 450 mm, 1500 mm, 225 mm

Stock number: 3995 CNC CYLINDRICAL GRINDING MACHINE Manufacturer: KELLENBERGER, Type: KEL-Varia 225 - 1500 Machines NO.: 650533, Year of manufacture: 2002 Specifications: Grinding length 1500 mm Gr. grinding diameter 450 mm Z-ash 1650 mm X-ash 320 mm Caschen 0.001 degree B ash 0.001 Large stone diameter 500 x 80 x 203.2 mm Control Heidenhain 1830 m Fabr. Accessories: Cooling water system. Grinding hubs 2 pcs Weight: 6000 kg

grinding diameter: 250 mmgrinding length: 650 mmcentre height: 125 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMaschine wird mit Wartung und neuer Geometrie verkauftBetriebsstunden bisher 12260Reitstock mit FeinverstellungSchleifspindelstock schwenkbar mit 5° HirtverzahnungPapierbandfilterMarposs MesseinrichtungInnenschleifeinrichtungThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8313 Type: 1500 R Producer: Kellenberger Created: 1972 Parameters: Table dimensions: 2060 x 140 mm Maximum grinding diameter: 250 mm Max. grinding length: 1500 mm Length: 3270 mm Width: 1600 mm Height: 1650 mm Weight: 3250 kg Equipment: DRO

grinding diameter: 850 mmgrinding length: 4.000 mmcentre height: 525 mmworkpiece weight max. betw. centres with steady: 5.000 kgcontrol: SINUMERIK 840 D Feeds & travels: - feed Z-axis: 0,01 – 6.000 mm/minfeed X-axis: 0,01 – 6.000 mm/minTravel Z-axis (table): 4.500 mmTravel X-axis (grinding spindle): 650 mmGrinding wheel: - Max. Dimension: Ø1.060x60x304,8 mmgrinding wheel speeds: 1.100 min-1peripheral speed: 45 m/secpower: 22 kWtail stock: - Taper: MK 6 quill travel: 100 mmdiameter of quill: 115 mmWorkpiece spindle: - Taper: MK 6 Speed range workpiece: 10 - 120 min-1torque of the drives: 41,5 NMcontrol: total power requirement: 52 kWweight of the machine ca.: 25,5 tEquipment & AccessoriesCNC cylindrical grinding machine in most robust design for heavy workpieces• Scope of geometric retrofit:• Slideways of X- and Z-axis regrinded, intermediate table and top table regrinded  ...

Year of Make: 1976 Last overhaul of mechanics: 1988 Last electrical overhaul: 2011

grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 175 mmgrinding wheel diameter: 400 mmgrinding wheel width: 50 mmbore: 127 mm: MK5 work piece spindle speed: 20-400 U/minworkpiece spindle - bore: mmgrinding head swivelling: 360 °grinding spindle head - swivable: 180 + - °grinding spindle speed: 1500,1700,2200 U/min: 0,001-0,030 mm/Ø: 0-0,95 mm/Ø: ±8 °longitudinal feed of the table: 1300 mmtable speeds: 0,02-6 m/min: 130 kg: 130 inkl. Spannugkg kg: mmgrinding depth: mm: 70 mmtotal power requirement: 6,5 kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 4,2 x 2,0 mNeu geliefert an Universität. 2018 übernommen.Dann komplett bei BEMA gewartet und an an Einmannbetrieb geliefert.Nun wird die Maschine nochmal gewartet und Tischgeometrie neu hergestellt.2-Achsen-Digitalanzeige Fagor nachgerüstet.-Reitstock mit Feinverstellung-Innenschleifeinrichtung-Kühl ...

Control Other WEISS CNC Tip width [mm] 650 General: Control WEISS CNC Center width 650 mm Center height 200 mm Grinding wheel dimensions 400x60 mm + 500x60 mm Workpiece headstock: Speed 10 -650 rpm Workpiece weight max. 250 (100) kg Grinding diameter max. 390 mm

centre distance: 2.500 mmcentre height: 250 mmgrinding wheel diameter: 600 mmTotal travel of the grinding support: 320 mmspindle speeds: 50 - 450 mmtool adaptor: MK5 tail stock: MK Cylindrical Grinding Machine | NAXOS-UNION - W-500the cylindrical grinding machine was overhauled in 2017 by KPS-Schleiftechnik (RETROFIT – see order confirmation).The machine is in a well-maintained condition.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: W-500-2500 | W500 | W 500 | W 500 2500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Various flanges

grinding diameter: 390 mmgrinding length: 650 mmcentre height: 200 mmtotal power requirement: 46 kWweight of the machine ca.: 6 tdimensions of the machine ca.: 3x3x2,4 mUniversal cylindrical grinding – Type WUG21 (W27) Grinding length 650 mmEMAG Weiss stands for high-end technology in universal cylindrical grinding between centres. With its CNC-controlled WUG 21 machines, EMAG Weiss offers theright solution for virtually every user.--> Technical data Max. grinding length: 650 mm--> Centre height: 200 mm--> External grinding diameter: 1 – 390 mm--> Max. weight flying MK4: 100 kg--> Max. workpiece weight between centres: 250 kg--> Feed:--> X-axis travel: 480 mm--> Z-axis travel: 1.150 mm--> Workpiece headstock--> Tailstock--> Grinding spindle headstock--> Coolant device, manufacturer HYFRA,--> Belt filter, manufacturer Knoll, type KF 200 - year of manufacture 2012,--> Oil mist filter, ...

Max. grinding diameter 200 mm Max. sanding length 600 mm Max. workpiece weight 60 kg Device for internal grinding: no Machine dimensions L x W x H 2100x1800x1500 mm Machine weight 2300 kg Center width 600 mm

grinding diameter: - mmgrinding length: - mmcentre height: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We have stored an associated coolant system Knoll type VRF 450/2250 (built in 1997) at a freight forwarder, so it is not on the pictures. The machine is fully functional and is available immediately.

grinding diameter: mmgrinding length: mmcentre height: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7323 Type: BUAJ 30 Producer: Junker Created: 1999 Parameters: Table dimensions: 1380x160 mm Distance between tips: 630 mm Machine weight: 2800 kg

grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 175 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mTeilüberholte Maschine mit Messprotokoll nach NeumaschinentoleranzNEUE Steuerung Eckelmann ENCmit BEMA SchleifsoftwareKEL-ASSIST für Kelco 90numerisch gesteuerte B-AchseInnnschleifrinrichtung Dia 80mmSchleifscheibe links Durchmesser 400mmSchleifscheibe rechts Durchmesser 300mmInnenschleifspindel HJN 828hydraulischer ReitstockMikroverstellungKEL SET MesssystemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinder Schaudt BHU 40A Swing diameter: 400mm Center distance: 630mm The technical data can be found in the pictures. approx. transport dimensions and approx. weight: 3.5m x 2m x 2m, 3,500 kg Location of the machine: 76661 Philippsburg The machine can be viewed on site. It is in pristine condition. You can make an appointment for a viewing at any time. We'd love to hear from you.

internal diameter: 99999 mmgrinding depth: 99999 mmswing diameter: 99999 mmgrinding diameter: 99999 mmgrinding length: 200 mmcentre height: 175 mmcontrol: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC internal grinding machineB-axis 4 x 90°Q-axis for adjusting tapersUsed with minor maintenance2 HF internal grinding spindles: -Fischer MFM 1090 90,000 rpm -Fischer MFM 1242/60 42,000-60,000 rpm1 external grinding motor spindle Fischer MFVS1407 7,000 rpm-Pneumatic power clamping device with 20mm stroke-Dressing device with 2 swivelling arms, hydraulically foldable back-Grinding detection ring sensor Dittel on the workpiece headstock-Passive grinding detection with magnetic base-Paper belt filter 375 lThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We offer a complete set of original Kellenberger documents , for increasing the tip height by 50 mm. These are ground to a height. The overall picture shows the condition of the documents before post-processing

grinding length: 160 x 400 mmmechanical: ja weight of the machine ca.: 0,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding length: 500 mm Grinding diameter: 300 mm Grinding wheel diameter: 400 mm Equipped with: - Bezel - Grinding wheels Country of origin: Germany Machine LxWxH: 2300 x 1700 x 1700 mm Machine Weight: 3500 kg

grinding length: 1500 mmcentre height: 180 mmweight of the machine ca.: 3,9 tdimensions of the machine ca.: L: 4900 x 1650x 1800 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 5457 Type: UB 63/2000 Producer: HOL-MONTA Created: 2001 Parameters: Control system: Kavalír Maximum grinding length: 2000 mm Grinding diameter: 630 mm Tip stroke: 375 mm Total power requirement: 41 kW

grinding diameter: 450 mmgrinding length: 1000 mmcentre height: 225 mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mPhoto of machine already delivered in similar scope:-major maintenance-New table geometry-partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard)grinding wheel equipment RIGHT 300x40x127mmInternal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-PolyB-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/sHigh-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstockNO micro-adjustment on the tailstockSpring-loaded quill insertTop table cooling Standard workpiece headstock MK 5 DIN 55026 size 5Micro-adjustment for the standard workhead Dressing device on the lower table A ...

Peak height: 160 mm Tip width: 1500 mm Grinding wheel dimensions: 500 x 127 x 40 mm Grinding wheel speeds: 1570/2050 rpm electr. Connection: 380 V kW Space requirement: 4400/6400 x 2000 x 1400 mm Weight: approx. 4000 kg

grinding diameter: 360 mmgrinding length: 3000 mmcentre height: 180 mmtotal power requirement: 17 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tip width/grinding length: 1000/1075 mm Gr. Grinding diameter: 250 mm Table swivel: +/- 8° Gr. Table longitudinal movement: 1210 mm Workpiece spindle stick swivel: 0 - 90° Spindle bore/cone: 38 mm/MK 5 Grinding spindle stick easily swivelling Hydr. Quick adjustment approx.: 50 mm Grinding wheel dimensions: 400 x 50 x 127 mm 2 grinding wheel speeds due to V-belt step disc Drive power: 3 kW Space requirement: 2900 x 2200 x 1750 mm Weight: approx. 3.5 t

Dimensions (L/W/H): 1050x850x1300 mmWeight: 420 kgTotal power requirement: 4,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tip height: Grinding diameter 250 mm centre distance: loop length 575 mm grinding wheel dimensions: 500 x 60 x 127 mm Electr. Supply: 380 V, approx. 9 kVA kW space: 2650 x 2600 x 2240 mm weight: 3400 kg

Dimensions (L/W/H): 750x1000x1350 mmWeight: 420 kgTotal power requirement: 2,7 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tip height: workpiece or grinding diameter 500 mm centre distance: approx. 2000 mm maximum workpiece weight: 1200 kg wheel dimensions: 600 Ø x 300 mm wheel speeds: 965 RPM elect. Supply: 380 V, approx. 15 kW space: 2300 x 9000 x 2000 mm weight: 13000 kg

Dimensions (L/W/H): 1000x900x1400 mmWeight: 680 kgTotal power requirement: 12 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.