шлифовальные станки подержанные на продажу (2,212)

grinding diameter:600 mmgrinding length:3000 mmcentre height:300 mmweight of the machine ca.:11,8 tdimensions of the machine ca.:7100x2300 mmspindle turning speed range:14 - 220 U/mingrinding wheel diameter:650 mmgrinding wheel flange for width 25-40 mm:3 Stk.open tailstocks:3 Stk.chuck:Ø310 mmfixed steady:320 mmDistance between center: 3000 mm.Height of centres: 300 mm.Spindle speed: (n°12) 14 - 220 RpmMax grinding diameter: 600 mm.Stroke the wheelhead:(rapid) 50 mm.Stroke the wheelhead:(rapid+ micrometrical): 1 5 500 m mmm. .Max grinding wheel diameter: 650 mm.Max tilt table: 3° 30'Total absorbed power: 27,7 HpDimension: 7100x2300 mm.Weight approx: 11800 Kg.

workpiece diameter:5-125 mmgrinding depth:50-1000 mmclamping length:1000 mmtotal power requirement:1.9 KVAweight of the machine ca.:630 kgmax. workpiece weight:100 kgCenter Hole Grinding Machine.Workpiece must be rotated by machine during grinding

Equipment / Accessories - Micro adjustment on the tailstock - Internal grinding device for 80mm dia. Max. - Swivelling dressing device for internal grinding - Dial gauge stop for table swivel - Universal paper belt filter - Internal grinding spindle UJ70 Equipment / Accessories - Micro adjustment on the tailstock - Internal grinding device for 80mm dia. Max. - Swivelling dressing device for internal grinding - Dial gauge stop for table swivel - Universal paper belt filter - Internal grinding spindle UJ70 - 1 double-jaw bezel dia. 5-80 mm - 1 three-jaw bezel, hinged, dia. 3-120 mm

Power: 1.3Kw Grinding wheel size approx. 225mm Dimensions of clamping magnet: 350x180mm with suction device

Model: RUA 1000 Equipment: Coolant lubrication and filtration system Accessories: Wheel flanges and supports Order: Front control panel with manual controls Status: Used condition with traces of oxidation and wear Additional information: Conventional cylindrical grinding machine with metal guards and coolant system

Operation unknown!

Grinding range 2 - 13 mm Sharpening angle min./max. 90 - 140 degrees Connected load 230 V Machine weight approx. 10 kg Space requirement approx. 0.35 x 0.2 x 0.2 m Condition: never used / new (5)

Combined belt grinding and pipe grinding machine with - Abrasive belt K 40 - with 7 sanding rollers. 20, 28, 32, 41, 48, 60 and 76mm Sanding belt direction left/right Belt width 100 mm Belt length 2000 mm Belt speed 15/30 m/sec Tube diameter 20 - 76 mm Angle adjustable from - to 30 - 90 degrees Connection voltage 400 V Total power requirement 2.5 /3.3 kW Machine weight approx. 0.19 t Space requirement approx. 1.2 x 0.75 x 0.7 m Condition: never used / new (5)

Belt width: 65 mmincl. whetstone, diameter: 110 mm

Equipped with separate hydraulic power unit and power supply

Machine number: 32099/90 BEDrive power: 8.5 kWElectrical connection: 380 V, 50 Hzfor deburring various elongated componentsLengths from 200 mm to approx. 900 mm (without guarantee) incl. extraction

Voltage: 380V; Magnetic clamping plate 360x150 mm; Power: 1.75kW

Belt and internal grinding machine, oscillating, with several grinding inserts. Condition: never used / new (5)

Machine number: 2990-88Table dimensions: 320 x 120 mm

Batch that is part of a combination of batches

Model: Int+Ext Conventional

different makes and sizes; for more details see photos of the nameplates

ASSFALG 168 T Grinding Machine

Belt width 75 mm Belt length 2000 mm Belt speed 30 - 34 m/sec Total power requirement 4.1 HP Machine weight approx. 75 kg Space requirements approx. 1.2 x 0.5 x 0.85 m Condition: never used / new (5)

Drill Bit Grinding Machine: Additional station for grinding back the drill cutting surface (clearance angle) 25tk. Collets ER 40 are included in the scope of delivery, these are also suitable for clamping intermediate sizes. For grinding twist drills made of HSS and Tungsten carbides with a TiN layer of 8 - 32 mm. Rotor with precision ball bearings guarantees smooth running. Vibration-free running due to high weight and rubber feet. Sharpening angle adjustable for all common twist drills. Packaging Dimensions: 430 x 240 x 240mm. Weight 16Kg. Grinding range 8 - 32 mm Sharpening angle min./max. 90 - 140 degrees Connection voltage 230 V Condition: never used / new (5)

Surface Grinding Machine - Machine feet - Documentation Grinding length 600 mm Grinding width 250 mm Workpiece height 500 mm Table clamping area 600 x 200 mm Grinding wheel dimensions 220 mm Grinding spindle speed 1400 / 2800 rpm Total power requirement 2.0 kW Machine weight approx. 1.5 t Dimensions approx. 1.4 x 1.2 x 1.9 m

Technical data Type: F 50 Grinding length: 500 mm (600 mm without magnetic plate) Grinding width: 200 mm Table size: 200 x 600 mm Spindle speed: 3000 rpm Grinding wheel: Ø 225 x 25 x 51 mm Power: approx. 2.7 hp Weight: approx. 1200 kg Configuration Magnetic clamping plate Automatic transverse feed Stepless table movement Fine adjustment of the grinding head Coolant Setup Protective cover

Industrial Deburring Stations – Year 2019 SEW USOCOME actuator – Pneumatic control - General Description: We offer for sale these industrial deburring stations in good condition, year of construction 2019, designed for deburring operations in industrial environments. Robust, compact and safe stations, ideal for mechanical, machining, sheet metal or industrial subcontractors. - Technical characteristics Equipment Type: Deburring Station Year: 2019 Engine : SEW USOCOME Engine type: DRN80M2/BE05/FI B3 Maximum speed: 2860 rpm Order Type: MCLTPB0015-5A3-4-00 Structure: Column station with reinforced base - Integrated equipment Pneumatic up/down Foot pedal control Adjustable protective screen Built-in light stand Complete electrical box with dimmer and protections - Benefits Recent Material (2019) Rugged industrial manufacturing Engine recognized for its reliability Quick and easy inst ...

Technical data Manufacturer: Overbeck Type: 250 RU Year of Make: 1984 Workpiece diameter max.: 100 mm Max. grinding length: 250 mm Tip height: 100 mm Grinding wheel: Ø 300 mm Max. workpiece weight: 12 kg Spindle speed workpiece: 150–1350 min⁻¹ Grinding spindle: 2040 / 2440 min⁻¹ Power: 4–7 kW Weight: approx. 1350 kg (net) Configuration Hydraulic table movement Internal cylindrical grinding device Collet holder DIN 6341 Swivelling workpiece and grinding headstock Manual and automatic delivery Hydraulic quick adjustment

Belt width 150 mm Belt length 2000 mm Belt speed 30 - 34 m/sec Total power requirement 4.8 HP Machine weight approx. 100 kg Space requirements approx. 1.2 x 0.5 x 0.85 m