Manufacturer:
(Category: 104)
grinding diameter:600 mmgrinding length:3000 mmcentre height:300 mmweight of the machine ca.:11,8 tdimensions of the machine ca.:7100x2300 mmspindle turning speed range:14 - 220 U/mingrinding wheel diameter:650 mmgrinding wheel flange for width 25-40 mm:3 Stk.open tailstocks:3 Stk.chuck:Ø310 mmfixed steady:320 mmDistance between center: 3000 mm.Height of centres: 300 mm.Spindle speed: (n°12) 14 - 220 RpmMax grinding diameter: 600 mm.Stroke the wheelhead:(rapid) 50 mm.Stroke the wheelhead:(rapid+ micrometrical): 1 5 500 m mmm. .Max grinding wheel diameter: 650 mm.Max tilt table: 3° 30'Total absorbed power: 27,7 HpDimension: 7100x2300 mm.Weight approx: 11800 Kg.
workpiece diameter:5-125 mmgrinding depth:50-1000 mmclamping length:1000 mmtotal power requirement:1.9 KVAweight of the machine ca.:630 kgmax. workpiece weight:100 kgCenter Hole Grinding Machine.Workpiece must be rotated by machine during grinding
Universal tool and cutter grinder with worktable, dividing/indexing accessories and grinding head. Used workshop machine, condition as shown. Good lot for tool room, sharpening or refurbishment. Auction-ID: A1-51153-40
1 used: Internal cylindrical grinding machine • Manufacturer: OVERBECK, Herborn • Model: 250 I-HA • Factory No.: 261991 • Year of construction: 1971 • Clamping diameter: max. 140 mm • Grindable bore length: max. approx. 150 mm • Grindable bore diameter: max. approx. 0.8-80 mm Accessories: without internal grinding spindle without drive motor for internal grinding spindles Deflection pulleys for spindle drive available (Machine was installed by the previous owner with a pneumatic spindle operated) Flat grinding device, can be swivelled in by hand Coolant tank with pump
1 used ELB SURFACE GRINDER Model: SWBE 010 NPC-K Grinding area: 1000 X 550 X 400 mm Year of Make: 1988 Grinding wheel: 400 X100 X 127 mm ACCESSORIES Electric straight-line dresser with compensation Electro-Permian Magnetic Clamping Plate 1000 X 400 mm (SAV) Magnetic adhesive force control Universal Paper Belt Filter Grinding wheel with holder
Precision flat grinding machine Manufacturer: COSMOS Model: Earth 1050 NC Built: New factory Grinding length: 1000 mm Grinding width: 500 mm Grinding height: 400 mm Electric magnetic release plate 1000 x 500 mm Single fitters at the table firmly assembled for straight judting with compensation Programble display 4.7 " Unseated grinding spindle drive Universal paper tape filter
1 piece flat grinding machine COSMOS E 7040 NC grinding range 700x400x350mmelectric magnetic clamping plate 700x400mm single set-up, fixed for straight-straightering with compensation Programmable display 4.7 . . . . -level grinding spindle drive Universal paper strip filter; as good as new, ready for use
This 3-axis Proth PSGC-50120AHR surface grinding machine was manufactured in 2021. It features a table size of 500 x 1,200 mm and a maximum travel of 560 x 1,350 mm. The machine has a continuous table load capacity of 1,200 kg and includes a digital readout system retrofitted in 2022. If you are looking to get high-quality grinding capabilities, consider the Proth PSGC-50120AHR machine we have for sale. Contact us for further details.
4-meter honing machine, priced to sell, It can be inspected in our warehouse, Mimu machine tools (Italy)
grinding length: 450 mmgrinding width: 250 mmworkpiece height: 275 mmtable surface area: 550 x 200 mmdistance spindle center to table: max. 400 mmtable speeds: 0 - 30 m/mincross feed: 0 - 60 mm/Hubrapid traverse cross: 1,2 m/mingrinding wheel size: ø 250 x 30 x ø 51 mmgrinding spindle speed: 1400 / 2800 U/mintotal power requirement: 4 kWweight of the machine ca.: 1 tdimensions of machine L x W x H: 1,55 x 1,23 x 1,80 mAccessories: magnetic plate 450 x 200 mm, grinding wheel with flange, wheel trueing attachmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 450 mmgrinding width: 250 mmworkpiece height: 275 mmtable surface area: 760 x 200 mmdistance spindle center to table: max. 400 mmtable speeds: 0 - 30 m/mincross feed: 0 - 60 mm/Hubrapid traverse cross: 1,2 m/mingrinding wheel size: ø 250 x 30 x ø 51 mmgrinding spindle speed: 1400 / 2800 U/mintotal power requirement: 4 kWweight of the machine ca.: 1 tdimensions of machine L x W x H: 1,55 x 1,23 x 1,80 mAccessories: magnetic plate 450 x 175 mm, grinding wheel with flange, wet grinding attachmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
650 € 
