Key data: 19 U/min
Year of manufacture 2005 Machine hours 5428 Diameter range (OD) 19 -203 mm Workpiece weight 900 kg max. workpiece length 762 mm Working area 915 x 1015 mm Carriage travel 762 mm Carriage travel X-axis 736 Stroke length range 305 mm, Y-axis lifting speed 20 - 160 H/min Lifting motor 7.5 kW Axial pressure max. 1360 kg Spindle speeds 90 - 600 rpm Spindle motor 5.5 kW Infeed - Rotational Motion: Max. Torque25.4 N.m Footprint 2210 x 1805 D x 2275 H mm Weight 2040 kg Repairs 07.2025: New PC and new case installed. Software installed 4.21.1.0 Settings in Windows and Sunnen software. Price approx. 18.000,- Please understand that we can only answer inquiries with a complete address.
SUNNEN ML2000, Honing Diameter Range:, - Manual Stroking: 1.5 mm to 165 mm, - Power Stroking: 1.5 mm to 102 mm, Spindle Speed:, - Infinitely variable from 200 to 3,000 RPM, Stroke Rate:, - 60 to 350 strokes per minute, Automatic Sizing Range:, - 3 mm to 51 mm, Oil Tank Capacity:, - 106 liters, Pneumatic Requirements:, - 5.5 bar, Machine Dimensions:, - Length: 1,600 mm, - Width: 1,220 mm, - Height: 1,900 mm, Weight:, - Approximately 725 kg
Machine Type: Honing Machine Manufacturer: Pemamo Type: MDR 120 E Year of construction: 1999 / Commissioning 2003 Condition: used / very good Offer will only be sent if a complete imprint is provided! Price 2.850 Euro incl. 19% VAT Fixed Price Location Warstein , Germany Reference number M-PEM-0126 DESCRIPTION We offer you a used honing machine from the manufacturer Pemamo. Incl. adapters 1040-510 and 1040-11-20 see last picture With fine adjuster. Weight: 135kg Further dates will follow. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved
workpiece diameter: 125 mmmodule: 4 control: SIEMENS SINUMERIK travel -x axis: 105 mmtravel -y axis: 40 mmtravel -z axis: 500 mmworkpiece diameter: 17 - 39,5 mmworkpiece height: 6 - 15 mmGear Honing Machine | GLEASON-HURTH - ZH 125The machine is in very good condition.Please note that the technical details were added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: ZH125 | ZH-125The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 19 mm
Please ask for more details!
honing diameter: 45 mmstroke: 1000 mmthroat: mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m4 spindle honing machine for gunsHoning area according to the manufacturer:Diameter 5-45mmMaximum Honing Length 750mmAccessories:Honing tools for diameter:-10mm-12,3mm-13,3mm-21,1mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bearing number: 3694 HONING MACHINE Manufacturer: PLEIGER, Type: B - 290 Year of construction: 2002 Specifications: honing length 10000 mm workpiece size dia. 355 mm Min. Max. Honing Dia. 290 mm Length: 27,000 mm, Høhe: 10,000, Width: 2,000 mm, Weight: 30,000 Kg
Sunnen 1804 Honing machine, manual under power The machine can be seen working in our warehouse in Gussago BS. Test run possible Mimu Machine Tools, Honing dia (min-max): 1.5-120, Honing length (max): 250
Honing machine, SUNNEN ML3500, (like ml5000 ml2000 ec3500 ml 5000 ml 2000), this machine is currently under complete electronic retrofit (Siemens), Touch screen. Loader interface possible
Sunnen 1804 Honing machine, manual very good mech condition The machine can be seen working in our warehouse in Gussago BS. Test run possible Mimu Machine Tools, Honing dia (min-max): 1.5-120, Honing length (max): 250
honing diameter: 9999999 mmstroke: 9999999 mmthroat: 9999999 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mUsed without warrantyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
honing diameter: 9999999 mmstroke: 9999999 mmthroat: 9999999 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mUsed Treiber from a Nagel MSU2 controlNo warrantyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
honing diameter: 9999999 mmstroke: 9999999 mmthroat: 9999999 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mUsed panel of a NAGEL MSU2No warrantyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Single pass - progressive honing machine, SUNNEN MHS 840 (like VSS 84), overhaul and electronic retrofit (see video and photos), 4 heads, 8-station rotary table This machine can be inspected under power in our warehouse Test run possible M i m u Machine Tools Gussago BS Italy, Single-pass honing is a type of honing process used for finishing internal cylindrical surfaces, where a tool with a fixed set of abrasive stones passes through the bore only once to achieve the desired surface finish and dimensional accuracy. In this process, the tool is typically designed with a specific shape and size, allowing for precise material removal in a single stroke
Honing machine, SUNNEN EC3500, (like ml3500 ml5000 ml2000), this machine is currently under complete electronic retrofit (Siemens / Telemecanique), Touch screen. Loader interface possible
honing diameter: 40-420 mmstroke: 15-6500 mmcentre height: 520 mmworkpiece length: 6500 mmworkpiece dia.: 1000 mmsteady: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
honing diameter: 160 mmstroke: 3025 mmcentre height: 325 mmworkpiece length: 3000 mmworkpiece dia.: 600 mmsteady: spindle drive: 32-250 U/minstroke speed: 0-20 m/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
honing diameter: 125 mmstroke: 600 mmthroat: mmControl: total power requirement: kWweight of the machine ca.: 6 tdimensions of the machine ca.: 7,5x5,2x4,4 mUnique honing machine built for inline motor blocks and v-blocks.Universal also for other parts because of the controlled movementof the table in y and the spindle in x.Movement x: 2000mmMovement y: +-150mm-2 step expansion SMA/HDA (mechanic/hydraulic)-In process air gaugeHoning methods:-Normal honing-Short honing-Makro formStop methods:-mechanical expansion: Step-automatic or air gauge automatic.-hydraulic expansion number of strokes, honing time or air gauge automatic.-Possibility of changing of spindle rotation direction after number of strokes while honing process.Machine like new with only 4.800 switch hours.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
