used CNC Round Grinding Machines for sale

table-size: 400 x 350 mmx-axis: verstellbar coolant: weight of the machine ca.: 0,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- CC controller Siemens 840 D - Year of construction 2002 Specification - Tip width: 600 mm - Tip height: 180 mm grinding Ø: 355 mm Z-axis speed: 15 m/min - min. Z-axis speed: 0.01 m/min - Axis resolution Z-axis: 0.5 μm X-axis speed: 10 m/min - min. X-axis speed: 0.01 m/min - Axis resolution X-axis: 0.5 μm - Grinding wheel left side (Øa x w x Øi): 500 x 80 x 203 mm - Grinding wheel circumference speed: 45 m/s - Power external grinding spindle drive: 10 kW - Speed workpiece spindle: 0 - 1000 m/min - Conical bore workpiece headstock: MK5 - Conical bore tailstock grain tip: MK4 - Cylindricity adjustment: +10° / - 4° - Total connected load: 28 kW - Operating voltage: 3x 400 V / 50 Hz - Total weight of the machine: 5800 kg - Operating sound level: 70 dB(A) according to EN 31201

CNC FAGOR 8055 Center height : 140 mm Max. grinding diameter : 275 mm Distance between centers : 350 mm Work head center : MT 4 Work head servomotor Work head speed range :10-1.000 rpm Wheel dimensions : φ400X30(50)Xφ127 mm Periferical speed : 45m/s Wheel motor power : 7,5 CV Tailstook center : MT 4 Automatic dresser Magnetic+paper filter device Heat exchanger in electrical cabinet Canned cicles Machine net weight : 3.500 Kg Machine floor required : .2.600 X 2.700 X 1.800 mm New paint IN GEOMETRICAL OVERHAULING PROCESS (Orientative photo)

4-axis CNC slot grinding machine, built in 1997, with robot, control Siemens Sinumerik 840 D, dressing wheel, 2 grinding spindles. Workspace durchm. 8-16.5 mm (restricted) Clamping length with robot / hand 80-140 / 250 mm Swirl direction right/left/straight Swirl angle 0-42° Grinding wheel diameter 200 mm grinding length 650 mm grinding width 325 mm Grinding diameter min./max. 100/250 mm Table clamping surface 1000 x 287 mm Spindle speeds from 2000-6000 rpm. Power 35 kW Weight approx. 2.5 t Accessories: Machine bed extended, probe, tailstock, NC sub-apparatus, diamond dressing disc.

Prior sale reserved - errors possible Internal Reference Number: D-1143-3

grinding diameter: 150 mmgrinding length: 500 mmcentre height: 75 mmControl: Siemens 840 D total power requirement: kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC cylindrical grinding machine, make: JUNKER, type: JUMAT 6S 18-20S-18, YOC 2017, serial number: 10157 with CNC control, Fabr. SIEMENS, type: SINUMERIK 840D, grinding wheel diameter: 500/700 mm, grinding length: 750 mm, orbit diameter 320 mm, center height: 170 mm, clamping length 1,200 mm, workpiece weight 150 kg, machine weight: ca. 22.400 kg, dimensions of the machine: approx. 4700x3650x3000 mm

grinding diameter: 290 mmgrinding length: 800 mmcentre height: 150 mmcontrol: Fanuc oi - TD x-axis: 350 mmz-axis: 1000 mmspeed x-axis: 0.0001 - 10 m/minspeed z-axis: 0.0001 - 12 m/mingrinding wheel width: total power requirement: 25 kVAweight of the machine ca.: 8 tdimensions of the machine ca.: 3340 x 2660 x 2325 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece length: 6300 mmswing dia.: 800 mmclamping length: 6300 mmgrinding diameter: 800 mmgrinding length: 1660-6300 mmgrinding wheel dia. x width: 1500 x 150 x 650 mmgrinding spindle speed: 250 - 500 U/minwork piece spindle speed: 0,1-10 / 1 - 15 U/mintable - swivable +/-: °table speeds: m/minmax. workpiece weight between centres: 5000 kggrinding motor: 18,5 / 22 kWcontrol: FANUC 31i A5 clamping diameter: 200 - 600 mmdiameter of main spindle: 280 mmtailstock quill diameter: 240 mmtailstock adjustment: 90 mmfeed in x - axis: 0,01 - 10000 mm/minfeed range Z-direction: 1 - 6000 mm/minz-axis: 7750 mmx-axis: 650 mmbed width: 2300 mmbed track: 4 total power requirement: kWweight of the machine ca.: 55 tdimensions of the machine ca.: 16,5 x 5,5 x 2,3 mNamely automatic clamping, automatic gear shifting, automatic slightly loosening, automatic servo indexing, automatic centering, fast whee ...

General: Year of construction 1998 Control Kellenberger Kel-Varia Grinding length 600 mm Grinding diameter 350 mm Center height 175 mm Weight 6.000 kg

Naxos CNC Multi-Axis Cylindrical Grinder Year: 1987/2013 Max. swing: 630mm Max. distance workhead face to tailstock face: 4850mm Max. travel for Z axis: 5000mm Max. grinding distance for main wheel: 4520mm X axis infeed travel for both headstocks: 720mm Approx. weight between centers: 4000kg Power requirements: 460/3/60 This machine was completely remanufactured to new specifications in 2013 and installed in 2014. It was stripped down to the bare casting, table/base/wheel heads/work head and tailstock and the second z axis ways were fit and rescrapped. New electrical cabinet with all new wiring to the machine and new all components, hydraulic lines, air lines and new cable carriers were added. New Marathon 60HP motors for both grinding wheel heads. (The drives in the cabinet are set for 40 Hp) The spindle drives in the cabinet are Yakawa built in the USA along with the workh ...

Tip width 1750mm, grinding length 1500, tip height 250mm, Grinding wheel diameter 700mm, grinding wheel width 150mm, Workpiece spindle stick MK5, tailstock MK4, 2015 new SIEMENS control / drives / components and cabling. On behalf of selling. Machine can also be fitted with full cladding and new SINUMERIK CNC can be upgraded. (beitwo example photos)

grinding diameter: 445 mmgrinding length: 1000 mmcentre height: 225 mmcontrol: Siemens grinding table: swivable: Gradgrinding wheel speed: 50 m/secgrinding motor: 10 kWgrinding wheel size: L- Ø 500 x 80, Ø 203 mmdimensions of grinding wheel: R- Ø 400 x 63, Ø 127 mmgrinding head swivellable +/-: +190/-45 °workpiece weight: 250 kgworkpiece-spindlehead motor: kWturning speed range - workpiece spindle: 1000 U/minrapid speed: 15 m/minquill stroke: 60 mmweight of the machine ca.: 9,0 tdimensions of the machine ca.: 4,00 x 2,2 x 2,1 mUsed CNC- cylindric grinder with full B- axis.- filter system- steady- external hand wheel- 3 jaw chuckThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding length

grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 180 mmgrinding wheel width: 80 (100) mmgrinding wheel diameter: 450 mmspeeds of grinding spindle: U/minpower capacity - grinding motor: 7,5 kWtable speed -stepless-: m/mingrinding spindle head - swivable: °adjustment autom. at table reverse: mm/minturning speed range - workpiece spindle: U/mingrinding head swivelling: °workpiece-spindlehead motor: kWworkpiece spindle head:: workpiece weight max.: 120 kgdressing device: coolant: voltage: 400 VControl: Fanuc 180-T total power requirement: 18 kWweight of the machine ca.: 6500 kgdimensions of the machine ca.: 3,00 x 4,60 x H. 1,80 mband filter unit: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Nice Grinder TOS Hostivar BUTE 63 x 5000 CNC Fully renovated ,Extended and CNC new in 2007 Under power

grinding diameter: 200 mmgrinding length: 340 mmcentre height: 100 mmgrinding wheel diameter: 350 mmgrinding wheel width: 50 mmbore: 127 mm: MK 4/5work piece spindle speed: 50-500, stufenlos 1/minworkpiece spindle - bore: 35 mmgrinding head swivelling: 360 °grinding spindle head - swivable: 12 + - °grinding spindle speed: U/min: bis 0,05 mm/Ø: bis 0,05 mm/Ø: ±11 °longitudinal feed of the table: 340 mmtable speeds: 0-5 m/min: kgcross travel: mm: kg: mmgrinding depth: mm: mmtailstock quill taper MT: 3 MKquill travel: 20 mmcentre distance: 340 mm: M 48x3 total power requirement: 4,5 kWweight of the machine ca.: 1,7 tdimensions of the machine ca.: 2,02 x 1,2 x 1,45 moverhauled with Tschudin geometrical protocoll. Internal grinding device is not in the offer included. Extra costs 5.000 Euro. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht d ...

Tool spindle 90,000 rpm, Suction: 3Nine, vibrating conveyors, Measuring device STOZ