We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Fabbricante:
(Categoria: 104)
usato
N. Inv. : 7361 Tipo: MS 248 Produttore: STANKO Generato: Parametri: Il mulino è in buone condizioni.
usato
Tretter drill sharpening machineLength L -- R: 1200 mm Depth Fw --Bw: 1000 mm Height: 1500 mm Weight: 1,6 ton
usato
N. Inv. : 7292 Tipo: FS30 Produttore: LINDNER Creato: GO 1999 Parametri: Peso della macchina: 3900 kg Il macinino è in buone condizioni.
usato
Type: 4/60 min drill angle: 90° max drill angle: 180° 1,5 HP grinding wheel diameter: 203/51/28 mmMax dia: 4 > 60 mm Length L -- R: 1080 mm Depth Fw --Bw: 1100 mm Height: 1250 mm Weight: 345 kg
usato
N. Inv. : 7293 Tipo: FS30 Produttore: LINDNER Generato: Parametri: Il macinino è in buone condizioni.
usato
usato
Num. Inv. : 7411 Tipo: R6-5000 Produttore: Kolb Creato: 1981 Parametri: Diametro di rettifica: 605 mm Peso massimo del pezzo: 3000 kg Distanza tra le punte: 5000 mm Peso della macchina: 17900 kg
usato
Sanding path X/Y: 1000mm/500mm, weight: 5000kg. Including coolant pump with tank (approx. 252l), hydraulic system and self-made suction device. Dressing axis (W-broken). Documentation available. On-site inspection is possible.
usato
N. Inv. : 7417 Tipo: BSM 1300 RRDB Produttore: RWT Creato: 2015 Parametri: Larghezza nastro aspirante: 1300 mm Diametro dei rulli di macinazione: 180 mm Diametro del rullo di alimentazione: 50 mm Lo spessore del pezzo: 0,5-160 mm Velocità nastro abrasivo: 18 m/s Peso: 2840 kg
usato
Center height: 165mm, center width: 750mm, Morse taper: 4, grinding diameter small/large: 80mm/200mm, internal grinding small/large bore: 5mm/100mm, max. grinding depth: 250mm.
usato
N. Inv. : 7471 Tipo: UPFS 150/88 XYZ Produttore: DOEBELI Creato: 1991 Parametri: Sistema di controllo: Bosch Diametro tavola: 250 mm Asse X: 150 mm Asse Y: 50 mm Asse Z: 60 h Attrezzatura: Filtrazione Serbatoio del liquido di raffreddamento
usato
Weight: 2.2t, including documentation.
usato
Num. Inv. : 7472 Tipo: UPFS 150-117 Produttore: DOEBELI Creato: 1995 Parametri: Sistema di controllo: Bosch Diametro tavola: 250 mm Asse X: 150 mm Asse Y: 50 mm Asse Z: 60 mm Attrezzatura: Filtrazione Serbatoio del liquido di raffreddamento
usato
X-travel: 270mm, y-travel: 480mm, z-travel: 110mm, U-travel: -100 to 106°, max. workpiece diameter: 25mm, workpiece length between the tips: 40-180mm, controls: FANUC GE, connected load: 42kVA, weight: 9t.
usato
Num. Inv. : 7462 Tipo: G130 Produttore: Göckel Creato: 1987 Parametri: Sistema di controllo: Sinumerik 810 Lunghezza delle piastre: 7500 mm Larghezza delle piastre: 1000 mm Altezza macchina: 3500 mm Lunghezza della macchina: 15000 mm Larghezza della macchina: 3500 mm Peso della macchina: 45000 kg Attrezzatura: 500 segmenti di macinazione in ceramica e 500 in bachelite 2016: Conversione del sistema di controllo a Sinumerik 810
usato
Collet: SCHAUBLIN W25, controls: FANUC GE, including loader.
usato
N. Inv. : 7463 Tipo: G80 Produttore: Göckel Creato: 1987 Parametri: Lunghezza tavola: 3100 mm Larghezza delle piastre: 400 mm Altezza macchina: 2000 mm Lunghezza della macchina: 8000 mm Larghezza della macchina: 3000 mm Peso della macchina: 14000 kg
usato
X-travel: 270mm, y-travel: 480mm, z-travel: 110mm, U-travel: -100 to 106°, max. workpiece diameter: 25mm, workpiece length between the tips: 40-180mm, controls: FANUC, connected load: 42kVA, weight: 9t.
usato
Numero Inv. : 7459 Tipo: GU-A Produttore: LINDNER Generato: Parametri: Il mulino è in buone condizioni.
usato
X-travel: 270mm, y-travel: 480mm, z-travel: 110mm, U-travel: -100 to 106°, max. workpiece diameter: 25mm, workpiece length between the tips: 40-180mm, controls: FANUC Series 15-M, connected load: 15kW, weight: 9t.
usato
Num. Inv. : 7464 Tipo: G100 Produttore: Göckel Creato: 1987 Parametri: Lunghezza della tavola: 2500 mm Larghezza delle piastre: 600 mm Altezza della macchina: 2300 mm Lunghezza della macchina: 7000 mm Larghezza della macchina: 3000 mm Peso della macchina: 14000 kg
usato
Max. table load: 8t, diameter table: 2000m, max. wheel diameter wheel: 720mm, pressure angle: 12.5-30°, max. bevel angle: 35°, diameter grinding wheel: 300mm/400m, peripheral speeds: 25 or 35m/s, grinding stroke: 750mm, number of teeth: 12-372, length: 6800mm, width: 5500mm, height: 3800mm, weight: 26t, was modernized in 2000 and equipped with CNC control, with documentation, on-site inspection is possible.
usato
N. Inv. : 7466 Tipo: AR61 Produttore: Reform Creato: 1988 Parametri: Sistema di controllo: Simatic Lunghezza della tavola: 2500 mm Larghezza delle piastre: 600 mm Altezza della macchina: 2400 mm Lunghezza della macchina: 11000 mm Larghezza della macchina: 3200 mm Peso della macchina: 22000 kg 2021: Conversione del sistema di controllo in Simatic e revisione dell'asse Z
usato
Grinding disk diameter: 600mm, controls: Siemens S7, with documentation, was maintained regularly, an inspection is possible.
usato
Num. Inv. : 7192 Tipo: BU 28/630 CNC Produttore: TOS Creato: GO 2004 Parametri: Potenza totale richiesta: 10 kVA Lunghezza massima di rettifica: 630 mm Corsa della punta: 140 mm Peso massimo del pezzo: 65 kg Distanza tra le punte: 630 mm Altezza macchina: 1600 mm Lunghezza della macchina: 3750 mm Larghezza della macchina: 2300 mm Peso della macchina: 3000 kg
usato
Controls: FANUC GE 16, including documentation and tool cones.
usato
Num. Inv. : 7287 Tipo: KGS- 250 AHD Produttore: KENT Creato: 2001 Parametri: Lunghezza piano di lavoro: 540 mm Larghezza piano di lavoro: 260 mm Peso della macchina: 1300 kg
usato
X-axis: 55mm, B-axis: 137°, C-axis: 360mm, with robot, part recognition, pallet changer, measuring control, grinding wheels, rams and dressing pots, an inspection is possible.
usato
Num. Inv. : 7323 Tipo: BUAJ 30 Produttore: Junker Creato: 1999 Parametri: Dimensioni tavola: 1380x160 mm Distanza tra le punte: 630 mm Peso della macchina: 2800 kg
usato
Controls: SIEMENS SINUMERIK, length: 3000mm, width: 1700mm, height: 2000mm.