Manufacturer:
(Category: 101)
Machine: Radial drilling machine ATELIERS GSP 405 T 125 Manufacturer: GSP WORKSHOPS – Courbevoie, France Model: 405 T 125 Serial No.: 2640 Type: High Capacity Radial Drill with Motorized Arm and Self-Tightening Chuck Supply voltage: 220 V – 50 Hz Motor power: 1.1 kW – NOVACEM COMPAX asynchronous motor Drilling capacity: 50 mm in steel Arm length: 1250 mm Column diameter: approx. 300 mm Table Surface: 900 × 700 mm T-Grooved Total height: approx. 2400 mm Weight: approx. 2000 kg Equipment: – Motorized height-adjustable drilling head – Automatic advance and micrometric lowering adjustment – Reversal of the direction of rotation – Solid cast iron table with T-slots – Arm and spine locking device – Centralized manual controls – NOVACEM asynchronous motor greased for life, DC rotor compliant with NF C51-100 – Electrical cabinet redone, integrated ABB circuit breaker Gen ...
travel -x axis:1000 mmtravel -y axis:500 mmtravel -z axis:610 mmturning speed range:8000 1/minweight:5,5 to.control:HEIDENHAIN iTNC 530 tool change unit:24 Pos.Tool bore:SK 40 table-size:1.200 x 500 mmmax. table load:850 kgtotal connected load:37 kWspace requirements approx. LxWxH:2,65 x 2,1 x 2,9 mvertical machining center,internal coolant supply,direct measuring system,prepared for 3D-touchprobe (without touchprobe),chioconveyorapprox. 18.500h "machine on", approx. 500h "spindle on"
travel -x axis:1000 mmtravel -y axis:500 mmtravel -z axis:610 mmturning speed range:12000 1/mincontrol:HEIDENHAIN iTNC 530 tool change unit:40 Pos.Tool bore:SK 40 table-size:1.200 x 500 mmmax. table load:850 kgtotal connected load:37 kWweight:6,8 to.space requirements approx. LxWxH:2,65 x 2,1 x 2,9 mvertical machining center,internal coolant supply 20bar,airblast through spindle,direct measuring system,prepared for 3D-touchprobe (M&H PS 25.00),chioconveyorNC-dividing device LEHMANN EA 520 L MA (center height 180mm)approx. 26.000h "machine on", approx. 7.500h "spindle on"
x-travel:3000 mmy-travel:600 mmz-travel:800 mmtable surface area:3.600 x 650 mmmax. table load:2.800 kgcontrol:TNC 426 HEIDENHAIN turning speeds:6.000 1/mintool change unit:30 Pos.taper ISO:SK 50 rapid motion - x-axis:30 m/minrapid motion - y-axis:30 m/minrapid traverse Z-axis:30 m/minspindle drive:31 / 21,5 kWtotal power requirement:45 kWdimensions of the machine ca.:5,5 x 3,4 x 3 mweight of the machine ca.:15,5 t3-axis vertical machining-center,prepared for 4th axis (wire and plug), internal cooling device 40 bar,chip conveyor,el. handwheel HR 410,3D-touch probe,direct measuring system,dividing wall, twin table machining,flush gun,table elevation 100mm,bed flushing,coolant of spindle (oil),approx. 53.000 switch on hours, 18.500 spindle hours
drilling capacity: 35 mm; drilling depth: 210 mm; speed to N =: 830 rpm; adhesion: 16000 N; power: 1600 kW; connection: 230 V; description: equipped with automatic cooling system; unused; 5637;
:FB-160 spindle diameter:160 mmx-travel:4000/6000/8000/10000/12000/14000/16000 mmy-travel:2000/2500/3000/3500/4000 mmz-axis:1200 mmw-axis:700 mmspindle cone:50 SK/BTspindle speed max.:3000 U/minspindle drive:37/51 kWfeeds:X/Y/Z/W: 10 / 10 / 10 / 8 / 5 m/minrapid speed:X/Y/Z/W: 20 / 20 / 20 / 10 / 5 m/minmax. torque on the spindle:3.300 Nmcross section of ram:460x520 mmtable load:30 ttable-size:2500x2500 mmtable travel:1500 mmweight of the machine ca.:FBM-160 mit X=4m: 80 tpositioning accuracy:0.032/1000 mmrepeating accuracy:0.018/1000 mmCNC controller:Siemens/Fanuc/Heidenhain CNC controls from:Siemens/Fanuc/Heidenhain Factory-new CNC controlled panel drilling machine with CNC control from Siemens / Fanuc / Heidenhain. All essential components from well-known manufacturers such as Siemens, SKF, FAG, Heidenhain, Igus and many more.Newly developed FB seriesConvenient for a variety of ma ...
Auction-ID: A1-41492-6
Machine is equipped with: - Through spindle cooling - 4th axis - Heidenhain TS-460 probe - oil chiller - 30 position ATC Auction-ID: A1-41492-11
Auction-ID: A1-41492-19
Auction-ID: A1-41492-12
CNC Vertical - Machining Center HERMLE C 1200 V With track control Heidenhain iTNC 530 Year of Make: 2009 Travel : X 1200 Y 900 Z 500 Speed range : 20 – 10,000 rpm infinitely variable ( HSK 63 ) With the following accessories: Rigid angle table 1260 mm x 800 mm clamping surface Vertical tool changer with 30 magazine positions ( HSK 63 ) IKZ 40 bar Blow-off device Scraper belt conveyor Rotating transparent window Coolant Setup Electronic Heat Compensation iTNC 530 Electr. Manual control module HR 410 3 D Probe Heidenhain Control cabinet cooling unit ( RITTAL) Oil mist extraction Various HSK 63 tool holders equipped with tools Spindle Oil Cooler Swarf Spray Gun 4 Pieces Height Adjustable Machine Shoes Operating Instructions
CNC Vertical Machining Center HERMLE C 30 U With track control Heidenhain iTNC 530 Year of Make: 2008 Travel distances : X 650 Y 600 Z 500 Speed range : 20 – 18,000 rpm infinitely variable ( HSK 63 ) With the following accessories: NC swivel rotary table Ø 630 mm Vertical tool changer with 32 magazine positions ( HSK 63 ) Linear Axis Standard Version Blowing air d.d. spindle center Blow-off device IKZ 40 bar , Paper belt filter for IKZ Scraper belt conveyor Manual Cab Door , Manual Cab Roof Polycarbonate Safety Lenses Electronic Heat Compensation iTNC 530 Electr. iTNC manual control module 3 D Probe Heidenhain Various HSK 63 tool holders equipped with tools Rotating transparent window Oil mist extraction Swarf Spray Gun 4 Pieces Height Adjustable Machine Shoes Operating instructions
CNC Vertical Machining Center HERMLE C 50 U With track control Heidenhain iTNC 530 Year of Make: 2008 Travel : X 1000 Y 1100 Z 750 Speed range : 20 – 18,000 rpm continuously variable ( HSK 63) With the following accessories: NC swivel rotary table Ø 1150 mm x 900 mm Vertical tool changer with 60 magazine positions ( HSK 63 ) Blowing air through the centre of the spindle Blow-off device IKZ 80 bar with paper belt filter Scraper belt conveyor Coolant Setup Sealing air for scales, bed flushing Oil mist extraction Manual Cab Door , Automatic Cab Roof Electronic Heat Compensation iTNC 530 Electr. Manual control module HR 410 3 D Probe Heidenhain Various HSK 63 tool holders equipped with tools Rotating transparent window Swarf Spray Gun 4 Pieces Height Adjustable Machine Shoes Operating instructions
Key data: 100 mm, 1600 mm, 1120 mm
Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 0-1120 rpm Axis W ... 900mm Axis Z ... 1250mm ISO 50 Clamping table surface ... 1250 x 1250mm Main engine power ... 11kW Max. workpiece weight... 3000kg Total power requirement ... 15kVA L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14000kg The machine is in good condition, possible to test under power in our warehouse.
CNC Vertical Machining Center HERMLE C 650 U With track control Heidenhain TNC 640 Year of manufacture: 2018 Travel : X 1050 Y 900 Z 600 Speed range : 20 – 18,000 rpm infinitely variable ( HSK 63 ) With the following accessories: NC swivel rotary table Ø 900 mm x 750 mm ( T slots for SRT ) Vertical tool changer with 42 magazine positions IKZ 40 bar with paper belt filter Sealing air for scales Scraper belt conveyor Coolant Facility ́ Blow-off device Blowing air d.d. spindle center Manual Cab Door , Manual Cab Roof Polycarbonate Safety Lenses Electronic Heat Compensation Electronic handwheel BLUM Wz-bruch / - Measurement A 2 3 D Probe Heidenhain Chip rinsing gun Oil mist extraction Control cabinet cooling unit ( RITTAL) 4 Pieces Height Adjustable Machine Shoes
CNC Vertical Machining Center DECKEL MAHO DMC 70 eVolution With track control Heidenhain iTNC 530 Year of Make: 2007 Travel: X 750 Y 600 Z 520 Speed range: 0 – 18000 rpm infinitely variable (SK 40) With the following accessories: 2-axis NC swivel rotary table 700 mm x 500 mm clamping surface 2-fold pallet changer Vertical tool changer with 92 magazine positions ( SK 40 ) Full protection cabin with sliding doors and interior lighting Electronic handwheel 3 D Probe Heidenhain TS 640 Tool measurement in the work area (BLUM Laser) Operating mode 3 + 4 IKZ 40 bar Rotoclear Conveyor Coolant Setup Swarf Spray Gun 4 Height Adjustable Machine Shoes Operating instructions
CNC Vertical Machining Center HERMLE C 600 U With path control Siemens Sinumerik 840 D Year of Make: 2004 Travel: X 600 Y 450 Z 450 Speed range: 0 – 16,000 rpm continuously variable (HSK 63) With the following accessories: NC Swivel Rotary Table 0 320 mm Vertical tool changer with 30 magazine positions (HSK 63) 3D Probe Renishaw BLUM Wz – quarry / - measurement A 2 Electronic Heat Compensation Electr. Hand control module Manual Cab Door , Manual Cab Roof Swarf Spray Gun Oil mist extraction IKZ 40 bar Conveyor Chip wagon Sealing air for scales 3 Height Adjustable Machine Shoes Operating instructions
High-speed radial drilling machine DONAU DR 23 Year of Make: 1980 Speed range: 70 rpm – 1550 rpm Projection: 920 mm Drilling capacity in steel 30 mm Tapping device Mechanical feed Clamping surface table 1050 mm x 400 mm Spindle mount MK 3 Machine Light Coolant Setup Rotary table 0 250 mm with dividing discs Machine vise 160 mm 5 Pcs Height-Adjustable Machine Shoes Various tools
Key data: 100 mm, 1600 mm, 1120 mm
Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 0-1120 rpm Axis W ... 900mm Axis Z ... 1250mm Spindle holder ... ISO 50. Clamping table surface ... 1250 x 1250mm Main engine power ... 11kW Max. workpiece weight ... 3000kg Total power requirement ... 15kVA L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14000kg The machine is in good condition, possible to test under power.
Max. drilling diameter ... 63mm Spindle holder ... Morse code 6. Machine weight ... 7100kg Max. vertical arm adjustment ... 950mm Spindle speed ... 11-2000 rpm Main engine power ... 5.5kW Total power requirement ... 8.5kVA The machine is in good condition, possible to test under power.
Key data: 1000 mm, 600 mm, 660 mm
General overhaul: 2025 Control Heidenhain ... TNC 620 Clamping table surface ... 1300 x 600mm Ache X ... 1000mm Axis Y ... 600mm Axis Z ... 660mm Spindle speed ... 0-10000 rpm controlled axes ... 3 cooling ... 20bar Spindle holder ... ISO 40. L x W x H ... Š3000 (včetně van) x D2700 x V2940mmmm Machine weight ... 5500kg Magazine spaces ... 24
table length:2200 mmtable width:2500 mmtable load:16 ttotal power requirement:6,5 kWfeed speeds:1,25 - 160 mm/minrapid traverse speed:2000 mm/minlongitudinal adjustment:1500 mmweight of the machine ca.:12 tdimensions of the machine ca.:4,1 x 2,65 x 0,95 mTexte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht.Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt.Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt.Copyright © 2005-2024, Josef Weber. All rights reserved.
x-travel:3000 mmy-travel:1000 mmz-travel:1200/1300 mmspindle motor:32 kWspindle taper: ISO:50 spindle turning speed range:20 - 8000 U/minfeed range:1-30000 mm/minrapid traverse feeds:30 m/mintotal power requirement:80 kW
x-travel:2500 mmy-travel:1000 mmz-travel:750 mmtable surface area:3220 x 1000 mmWorkpiece weight approx.:3000 kgspindle taper ISO:50 milling spindle turning speeds:20 - 5000 U/minfeed speeds:1- 30000 mm/minrapid traverse:30 m/mintotal power requirement:40 kWdimensions of the machine ca.:6,9 x 4,1 x 3,7 mweight of the machine ca.:21 twith CNC HEIDENHAIN TNC 42630-pockets autom. toolchangerRENISHAW measuring probecoolant attachment with TSC and chip conveyordiverse toolholders
bore capacity in steel (diameter):80 mmarm length:2500 mmWORKING RANGE -BORING-:. - drilling capacity full bore (steel):80 mm - throat (max):2500 mm - horizontal travel:2000 mm - vertical travel:1000 mm - sleeve stroke:450 mmWORKING SPINDLE / HEAD:. - spindle revolutions (min):16 /min - spindle revolutions (max):1250 /min - number of gears:16 - spindle diameter:104 mm - taper fixture : MK 6 :. - drive power (max):7.5 kW - max. distance spindle ... clamping surface:2000 mmELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 HzDIMENSIONS / WEIGHTS:. - space requirements length:3730 mm - space requirements width:1400 mm - total height:4025 mm - total weight approx.:11000 kgAttachments :- Angular Table 1000 x 800 x 800- Coolant DeviceDescription of condition :SHOWROOM MACHINE
spindle diameter:150 mmx-travel:10000 mmy-travel:2500 mmbore spindle stroke:700 mmram stroke:700 dimension of the ram:340 x 340 mmspindle taper ISO:50 Speed of boring spindles:1,25 - 1250 U/min.feed speeds infinitely variable:1 - 5000 mm/minrapid traverse:5 m/mintotal power requirement:120 kWweight of the machine ca.:115 tdimensions of the machine ca.:15,1 x 10 x 6,4 mwith CNC SIEMENS 840 Dsl complete retrofit in 2010FIBRO CNC rotary table 2500 x 2500 mm, 50 to. loading capacity,longitudinal movement 2500 mm,angular milling head 4 x 90°universal milling headfloor plate area ca. 12000 x 6000 mm ( 72 m²)chip conveyor and coolant attachmentaerostatic guideways
x-travel:600 mmy-travel:580 mmz-travel:580 mmnumbers of pallets:2 pallet size::400 x 400 mmmax. workpiece weight:400 kgspindle taper ISO:40 spindle speeds::35 - 12000 feed speeds:1 - 50000 mm/minrapid speed:50 m/mintotal power requirement:25 kWweight of the machine ca.:12 tdimensions of the machine ca.:3,6 x 3,6 x 2,9 mwith CNC SEICOS 16 M ( FANUC base )autom. toolchanger 61-pocketspallet indexing 1°chip conveyor and coolant attachmentexhausterclamping cube and diverse toolholders
x-travel:800/945 mmy-travel:800 mmz-travel:600 mmspindle motor:27 kWspindle turning speed range:10 - 8000 U/minspindle taper ISO:40 c-axis:360.000 x 0,001 table load capacity:600 kgtable clamping surface::800 630 mmtotal power requirement:55 kWweight of the machine ca.:16 tMachine with Heidenhain iTNC 530 CNC control for 5 axis- pendulum operation with turn- swivil table left and fixed table right- tool changer for 30 tools- coolant device, chip conveyor- complete splash housing
spindle diameter:130 mmspindle diameter:130 mmx-travel:2190 mmy-travel:1520 mmz-travel:1000 mmw-axis:1075 mmtable surface area:2000 x 1800 mmworkpiece weight max.:8000 kgspindle turning speed range:4,5 x 900 U/minspindle taper: ISO:50 faceplate turning speed range:4,5 x 180 U/minfaceplate diameter:785 mmrapid traverse::5000 mm/mintotal power requirement:40 kWweight of the machine ca.:35 tdimensions of the machine ca.:5,5 x 6,9 x 5,2 mMachine retrofit and overhould with TNC 360 Heidenhain in 2023 and stepless spindle speeds- table indexing 4 x 90°- facing head 785 mm- exhauster- various arbors and tooling
Surplex GmbH 
