Manufacturer:
(Category: 101)
Machine: Radial drilling machine ATELIERS GSP 405 T 125 Manufacturer: GSP WORKSHOPS – Courbevoie, France Model: 405 T 125 Serial No.: 2640 Type: High Capacity Radial Drill with Motorized Arm and Self-Tightening Chuck Supply voltage: 220 V – 50 Hz Motor power: 1.1 kW – NOVACEM COMPAX asynchronous motor Drilling capacity: 50 mm in steel Arm length: 1250 mm Column diameter: approx. 300 mm Table Surface: 900 × 700 mm T-Grooved Total height: approx. 2400 mm Weight: approx. 2000 kg Equipment: – Motorized height-adjustable drilling head – Automatic advance and micrometric lowering adjustment – Reversal of the direction of rotation – Solid cast iron table with T-slots – Arm and spine locking device – Centralized manual controls – NOVACEM asynchronous motor greased for life, DC rotor compliant with NF C51-100 – Electrical cabinet redone, integrated ABB circuit breaker Gen ...
x-travel:960 mmy-travel:600 mmz-travel:480 mmrotary table::D 350 mmtable load:200 kgspindle turning speed range:12.000 1/mindrive capacity - spindle motor:14/10 kWcontrol:HEIDENHAIN iTNC 530 rapid traverse:32 / 32 / 24 m/minTool changer:30- fach spindle taper ISO:BT 40 weight of the machine ca.:7,4 ttotal power requirement:45 kVAdimensions of the machine ca.:3,1 x 2,3 x 3,1 m5-axis simultaneously universal-machining center,NC-rotary-swivelling table dia. 350mm,A-axis (120/-42°), C-axis 360°,Internal coolant supply, el. handwheel,chipconveyor,direct measuring system,Hour meter: approx. 9.000 h "machine on", approx. 3.500 h "spindle on"
Modell:RB 50 | RB 63 | RB 80 bore capacity in steel (diameter):50 | 63 | 80 mmarm length:1600 | 2000 | 2500 mmworkpiece height max.:1220 | 1600 | 2000 mmDistance between spindle and column, max.:1600 | 2000 | 2500 mmDistance between spindle and column, min.:350 | 400 | 450 mmspindle taper MT:5 | 5 | 6 MKspindle turning speed range:25-2000 | 20-1600 | 16-1250 U/mintransmission ratio:16 Stk.feed range:0.04-3.20 | 0.04-3.2 | 0.04-3.2 mm/mindice table:630x500 | 630x800 | 800x1000 mmpower capacity:4 | 5,5 | 7,5 kWWeight approx.:3500 | 7000 | 11000 kgMachine size (LxWxH):2500x1070x2840 | 3080x1250x3291 | 3730x1400x4025 mmcube table GB/T6170:Größe siehe tech. Daten foundation bolts:6 Stückslots with screws:6 Stückreducing bush:MK 3/1, MK4/2, MK 4/3, MK 5/4 payment: 100 % before loadingwarranty:12 months
spindle diameter:180 mmx-travel:6.000 mmy-travel:2.900 mmtotal power requirement:95 kWweight of the machine ca.:130 mit Zubehör tz-travel:1.250 Ram mmw-axis:1000 Spindel mmram stroke:1250 mmdimension of the ram:450 x 450 mmbore spindle stroke:1000 mmbore spindle turning speed range:920 1/minpowered rotary table: IOS 40 CNC 2 Achsen B u.V Rotary-table:3000 x 3500 mmRotary-table: CNC-IOS 40 NC mmstepless adjustable, relative to diameter:Index 4x 90° -360000 Winkel =0,001 Grad mmtravel - cross:Längs 1230 mmtable load of rotary table max.:40 Tonnenclamping plate:3 x 8000 x 2000 mmCNC Ram-Type Floor Boring and Milling machine,dismantled and storedThe headstock sliding guides were recoated and scraped.
magnetic drilling machine Brand: Stahlgruppe Type: SG450M Max. drilling diameter: 35 mm drilling diameter Power: 1600 watts Connection: 230 volts Magnet Strength: 16000 Newton Speed: 810 rpm Drilling depth: 145 mm drilling depth Includes: Oil reservoir for cooling and lubrication Security: Strap for fall protection Condition: unused, in the original packaging
equipped with steel base, T-slot clamping table
:RB 100 | RB 120 bore capacity in steel (diameter):100 | 125 mmarm length:3150 | 4000 mmdistance spindle center to floor plate:2500 | 2500 mmdistance spindle center to table:min. 750 mmspindle stroke:500 | 560 mmDistance between spindle and column, max.:3150 | 4000 mmDistance between spindle and column, min.:570 | 600 mmspindle taper MT:6 MK | Metrisch 80 spindle turning speed range:8-1000 | 6-800 U/mintransmission ratio:22 feed range:0.06-3.2 mm/mindice table:800x1250 mmpower capacity:15 | 18,5 kWWeight approx.:20000 | 28500 kgMachine size (LxWxH):4780x1630x4720 | 5817x2150x5120 mmpayment: 100 % before loadingwarranty:12 months
x-travel:1270 mmy-travel:660 mmz-travel:610 mmtable surface area:1500 x 660 mmtable load:1,3 tcontrol:ULTIMAX 4 turning speeds:10000 1/minspindle:15 kWTool bore:SK 40 rapid traverse:X/Y/Z 30/30/20 m/mintool change unit:24 Pos.total power requirement:30 kVAweight of the machine ca.:9,5 tdimensions of the machine ca.:4,8 x 4,56 x 2,95 mvertical machining center, el. handwheel,chipconveyor,
x-travel:610 mmy-travel:580 mmz-travel:580 mmdistance spindle nose and table:70-650 mmdistance spindle center to table:80-660 mmtable height over floor:1150 mmpallet table size:400x400 mmmax. workpiece weight:400x2 kgtable - indexing:1° (optional 0,001°) spindle speeds:12000 1/minspindle drive:22/25 kWspindle speed steps:2 spindle nose:40 SK/BTspindle bearing diameter:75 mmrapid speed:60 m/minfeeds:1-20000 mm/Utool taper:40 SK/BTTool changer:60 fachtool diameter:75 mmweight of tools max.:12 kgworkpiece length:410 mmnumber of pallets:2 compressed air volume:400 l/mincoolant tank:550 lhydraulic tank:30 llubrication tank:2 ltotal power requirement:45 kvaweight of the machine ca.:9500 kgCNC controller:Siemens/Fanuc/Heidenhain automatic tool changer:60 fachcnc rotary table:1 °inner coolant:20 barServo motors:vom Steuerungshersteller ATC:80/120 CTS:35 oder 70 bar CNC controls from:Siemens/F ...
50/60Hz; core drill dia 35mm; twist drill dia 13mm; stroke 210mm; cable length 2.5M; 7750
x-travel:710 mmy-travel:680 mmz-travel:680 mmdistance spindle nose and table:70-750 mmdistance spindle center to table:80-760 mmtable height over floor:1150 mmpallet table size:500x500 mmmax. workpiece weight:500x2 kgtable - indexing:1° (optional 0,001°) spindle speeds:12000 1/minspindle drive:22/25 kWspindle speed steps:2 spindle nose:40 SK/BTspindle bearing diameter:75 mmrapid speed:60 m/minfeeds:1-20000 mm/Utool taper:40 SK/BTTool changer:60 fachtool diameter:75 mmweight of tools max.:12 kgworkpiece length:410 mmnumber of pallets:2 compressed air volume:400 l/mincoolant tank:550 lhydraulic tank:30 llubrication tank:2 ltotal power requirement:45 kvaweight of the machine ca.:12200 kgautomatic tool changer:60 fachcnc rotary table:1 °inner coolant:20 barCNC controller:Siemens/Fanuc/Heidenhain Servo motors:vom Steuerungshersteller ATC:80/120 CTS:35 oder 70 bar CNC controls from:Siemens/ ...
x-travel:1050 mmy-travel:850 mmz-travel:970 mmdistance spindle nose and table:100-950 mmdistance spindle center to table:100-1070 mmtable height over floor:1300 mmpallet table size:630x630 mmmax. workpiece weight:1200x2 kgtable - indexing:1° (optional 0,001°) max. workpiece height:1100x1100 mmspindle speeds:10000 1/minspindle drive:30/25 kWspindle speed steps:2 spindle nose:50 SK/BTrapid speed:50 m/minfeeds:1-20000 mm/Utool taper:50 SK/BTTool changer:60 fachtool diameter:125 mmweight of tools max.:25 kgworkpiece length:610 mmnumber of pallets:2 weight of the machine ca.:21600 kgautomatic tool changer:60 fachcnc rotary table:1 °inner coolant:15 barCNC controller:Siemens/Fanuc/Heidenhain Servo motors:vom Steuerungshersteller ATC:80/120 CTS:35 oder 70 bar CNC controls from:Siemens/Fanuc/Heidenhain tool measuring system:von RENISHAW workpiece measurement system:von RENISHAW chip conveyor ...
x-travel:1.500 mmy-travel:700 mmz-travel:610 mmcontrol:HEIDENHAIN iTNC 530 table-size:1.400 x 700 mmtool taper:SK 40 numbers of positions in the tool changer:48 fachspindle turning speed - stepless:15000 1/minrapid traverse:36 m/mintable load capacity:700 kgspindle drive:25 kWtotal power requirement:30 kVAweight of the machine ca.:9,1 tdimensions of the machine ca.:3,7 x 2,65 x 2,9 mvertical machining center,20 bar internal coolant supply with paper filter,3D-touchprobe,chipconveyor,el. handwheelmeter readings:approx. 43.600 h "machine on", approx. 20.000 h "spindle on",
x-travel:1200 mmy-travel:1000 mmz-travel:1000 mmdistance spindle nose and table:100-1100 mmdistance spindle center to table:200-1200 mmtable height over floor:1350 mmpallet table size:800x800 mmmax. workpiece weight:1800x2 kgtable - indexing:1° (optional 0,001°) max. workpiece height:1300x1250 mmspindle speeds:10000 1/minspindle drive:30/25 kWspindle speed steps:2 spindle nose:50 SK/BTrapid speed:50 m/minfeeds:1-20000 mm/Utool taper:50 SK/BTTool changer:60 fachtool diameter:125 mmweight of tools max.:25 kgworkpiece length:610 mmnumber of pallets:2 weight of the machine ca.:26000 kgautomatic tool changer:60 fachcnc rotary table:1 °inner coolant:15 barServo motors:vom Steuerungshersteller CNC controller:Siemens/Fanuc/Heidenhain ATC:80/120 CTS:35 oder 70 bar CNC controls from:Siemens/Fanuc/Heidenhain tool measuring system:von RENISHAW workpiece measurement system:von RENISHAW chip convey ...
x-travel:1250 mmy-travel:880 mmz-travel:800 mmcontrol: Heidenhain TNC 430 tool change unit:60 Pos.Tool bore:SK 50 turning speeds:8000 1/minsize of pallet:1000 x 800 mmtotal power requirement:56 kVAweight of the machine ca.:14,3 tdimensions of the machine ca.:5,5 x 3 x 3,1 m5-axis machine with controlled universal milling head (B-axis),2-palett changer incl. 2 palets, 1000 x 800 mmProduction package:- internal coolant supply 40 bar with 900l coolant box (2,25 x 1.3 x 2,2m / 950kg),- chipconveyor (4,85 x 1,2 x 1,75m / 600kg),- ROTOCLEAR,- 3D touchprobe RENISHAW MP 10- 60 pos. ATC SK 50- el. handwheel - mech. tool-breakage control,accessories (SK 50 toolholdersapprox. 100.200 h "machine on", approx. 52.200 h "spindle on", last spindle change in 2020
x-travel:700 mmy-travel:700 mmz-travel:700 mmturning speeds:18.000 1/minmax. torque on the spindle:110 / 84 Nmtool taper:SK 40 control:HEIDENHAIN iTNC 530 tool change unit:180 fachsize of pallet:500 x 500 mm mmmax. workpiece weight:600 kgspindle:34 / 28 kWrapid traverse:60 m/mintotal power requirement:68 kVAweight of the machine ca.:10,5 tdimensions of the machine ca.:9,5 x 7,5 x 3,4 mdimensions for transport:4,3 x 2,4 x 2,6 mhorizontal machining center with linear drives,,NC-roundtable,pallet pool RS 10 for totally 12 pallets,monitor for workpiece setting-up device,high pressure coolant through spindle 40bar,internal air blast supply,mode 4,hydraulic clamping 2/4 for workpiece setting-up device and working table,BLUM laser,oilmist suction,3D touch probe TS 649,tool-breackage control, mechanical,SDS spindle diagnosis system,flush gun,el. handwheel,chipconveyor,approx. 112.000 h "machine ...
x-travel:800 mmy-travel:800 mmz-travel:800 mmturning speeds:12.000 1/mintool taper:SK 50 control:SIEMENS 840D shopmill tool change unit:240 fachsize of pallet:630 x 630mm mmspindle:52 kW / 430Nm total power requirement:87 kVAweight of the machine ca.:15 tdimensions for transport:4,6 x 2,95 x 2,7 mhorizontal machining center,NC-round-table pallet-changer (2 pallets),Internal Coolant Supply 40 bar,prepared for Infrared Touch Probe Renishaw MP 10 without probe,tool-breakage control (mech.),MQL,airblast through spindle,oilmist suction,TRANSMIT funbction,accuracy package,mode 4,glass window right door,incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 palletsapprox. 98.500 h main switch on apprax. 45.500 Spindle hours
x-travel:800 mmy-travel:950 mmz-travel:1020 mmcontrol:HEIDENHAIN iTNC 530 table load capacity:800 kgtool taper:HSK 63 turning speeds:16.000 1/minspindle:35 / 25 kWtable-size:770 mmmax. torque on the spindle:160 / 223 Nmtool change unit:120 (2x60) Pos.weight of the machine ca.:20 tdimensions of the machine ca.:3,3 x 6,15 x 3,2 m5-axis simultaneously machining center with controlled swivel-rotary table (A/B-axis),milling head horizontal,internal coolant device (10-80bar),oilmist-suction,electromech. tool-length measuring device GROB,chipconveyor,3D touch probe,KINEMATICOPT,BLUM laser,el. handwheel,hour meter: approx. 80.500 h "machine on", approx. 48.500 h "spindle on"
V.V. manual; including accessories; suitcase; Unused in box
For sale is a robust multi-spindle in-line drilling machine of the STEINBACH brand, with four separately driven drill heads, ideally suited for parallel drilling processes in series production or in fixture structures. The system has a large machine table with T-slots on which workpieces can be clamped and precisely positioned. Each drill head is equipped with its own electric motor – ideal for applications with different drilling diameters or tools in one operation. The machine bed and overall structure are made of heavy-duty cast iron construction, perfect for low-vibration and precise operation. Technical features: Manufacturer: Steinbach Maschinenbau Type: In-line boring machine with 4 spindles Individual drives per spindle (visible) Large, continuous machine table with T-slots Stable cast iron design Condition: used, ready for use Areas of application: Serial producti ...
x-travel:560 mmy-travel:410 mmz-travel:460 mmtable-size:900 x 410 mmspindle cone ISO:40 turning speed range - stepless:7000 U/minfeeds:20-10000 mm/minrapid motion -longitudinal/cross/vertical:26 / 26 / 30 m/mintool piece magazine with:24 CNC-control:MAZATROL M plus total power requirement:38 kWweight of the machine ca.:5000 kgdimensions of the machine ca.:3,5 x 2,9 x 2,3 m hoch mnice machine from 2. handunder power in our stockincl. manualsincl. chip-troughcover on the top upcraded ( stainless steel )incl. cero point clamping device CHICK
x-travel:500 mmy-travel:400 mmz-travel:330 mmcontrol:FANUC 31i B5 tool change unit:21 fachrapid traverse in x-y-z axis:54 m/mintaper ISO:BT 30 turning speed range::10.000 1 / minspindle drive:11 / 3,7 kWmax. table load:300 kgsurface area:600x 400 mmDimensions (L/W/H):1,6 x 2,1 x 2,25 mrapid traverse:48 m/mintotal power requirement:11 kVAweight of the machine ca.:2,1 tvertical CNC-milling-drilling machining center,Infrared Touch probe,el. handwheel,autom. door on right side,no internal Coolant Supply,Approx. 65.500 hours "machine on", approx. 8.200 hours "machine run"
:HBM-110 | HBM-110L | HBM-110XL spindle diameter:110 mmx-travel:900|1250|1600 mmy-travel:900|900|1200 mmz-travel:1400|1400|1400 mmW-axis (spindle longitudinal):600 mmB-axis (table):360x1 °table load:5 ttable-size:1100 x 960|1250 x 1100|1250 x 1100 mmT-slots:22 mmspindle speed:22 Stufen, 8-1000 1/minspindle taper:50 ISOrapid speed:(X / Y / Z / W) 2500 mm/minspeed - faceplate:4-200 1/mintorqe of face plate:1960 Nmdia of faceplate:630 mmmovement of facing slide:180 mmweight of the machine ca.:11,5|18|20 tmain drive:7,5 kWMachine size (LxWxH):5120x3380x3100 mm2-Axis DRO :für X- und Y-Achse (von NEWALL) CE-design:von TÜV Süd servo motors:von Siemens/Fanuc/Fagor CNC controls from:Siemens/Fanuc/Fagor
:HBM-130 | HBM-130L | HBM-130XL spindle diameter:130|130|130 mmx-travel:1600|2000|2000 mmy-travel:1400|1800|1800 mmz-travel:2000 mmU-axis:250 mmW-axis (spindle longitudinal):900 mmmax. torque on the spindle:3200 NmB-axis (table):360x1 °rapid speed:X/Y/Z/W: 2500 mm/mintable load:8|10|10 ttable-size:1600 x 1400|1800 x 1600|2200 x 2000 mmT-slots:9/11/12 Stk.T-slot - width:28 mmtransmission ratio:4 Stk.spindle speed:4-800 1/minspindle taper:50 ISOfaceplate:Drehmoment: 4900 Nmfaceplate:2.5-125 1/minfaceplate:Umdrehung stufenlos einstellbar faceplate:Ø:750 mmweight of the machine ca.:22,5|24,5|25,5 tmain drive:22 kWMachine size (LxWxH):6995/3647/342|7030/4665/3800|7030/4665/3800 mmPLC control:Siemens S7 servo motors:von Siemens/Fanuc/Fagor Technical Offer of HBM-130? Powerful servo spindle motor and four spindle speed rang, stepless in each range. much lower maintenance and 80% failure ra ...
x-travel:700 mmy-travel:420 mmz-travel:380 mmcontrol:SIEMENS 840D sl tool change unit:15 fachtaper ISO:BBT 30 turning speed range::10.000 1 / minrapid traverse:60 m/mindiameter of tools max.:80 mmmax. tool length:250 mmmax. tool weight:3 kgfeed power:5.000 Nchange-time chip to chip:1,5 secDimensions (L/W/H):3 x 2 x 2,6 mtotal power requirement:22 kVAweight of the machine ca.:4,1 t3 axis simultaneously milling-drilling machining center,table 840 x 420mm,direct measuring system,airblast outside,NANO package (higher temperature stability),TROPICAL package (up to 50°C),PROGRESSline,BDE interface,el. handwheel,RENISHAW touch probe OMP 40-2table touch probe,prepared for handling-system incl. autom. door left site,prepared for hydr. interface,internal Coolant Supply 40bar, 400l,airblast,chipconveyor (dropping height 1.050mm,el. keysystem incl. key,Approx. hours "machine on", approx. hours "s ...
x-travel:800 mmy-travel:800 mmz-travel:800 mmturning speeds:35-10.000 1/minspindle:37 / 30 kWmax. torque on the spindle:525 / 206 NmTool bore:BT 50 rapid traverse:60 m/mintool change unit:160 Pos.size of pallet:500 X 500 mmcontrol:MAZATROL 640M Nexus c-axis:0,001° x 360.000 workpiece weight:1.000 kgworkpiece height max.:1.000 mminterference area:900 mm2 pcs. horizontal machining centers (HCN 6000 + HCN 6000-II, 2008), interlinked with pallet pool (16 pallets) MAZAK FMS,2 pallet changer,chipconveyor,coolant device with internal coolant supply,
x-travel:800 mmy-travel:800 mmz-travel:800 mmturning speeds:35-10.000 1/minspindle:37 / 30 kWmax. torque on the spindle:525 / 206 NmTool bore:BT 50 rapid traverse:60 m/mintool change unit:160 Pos.size of pallet:500 X 500 mmcontrol:MAZATROL 640M Nexus c-axis:0,001° x 360.000 workpiece weight:1.000 kgworkpiece height max.:1.000 mminterference area:900 mm2 pcs. horizontal machining centers (HCN 6000-II + HCN 6000, 2005), interlinked with pallet pool (16 pallets) MAZAK FMS,2 pallet changer,chipconveyor,coolant device with internal coolant supply,
