CNC machining center brand AWEA 1460 BM Year of Make: 2014 Power-on hours: 16656 Spindle Hours: 7073 Single-shift operation/KD-maintained X=1460mm Y= 600mm Z=620mm 40x Random Changer 30 KW spindle power Control: Heidenhain 530 Handwheel: Heidenhain Heidenhain Measuring Rulers Sealing air on measuring rulers IKZ= 30 bar Exterior cooling Cabin flushing Spindle: 10,000U/pm Large coolant tank and filter Large side doors Machine can be viewed on site by arrangement under Chip!

 ...

• more information

This 4-axis AWEA AF-1000 vertical machining center was manufactured in 2017. It features a 1020 mm X-axis travel, 550 mm Y-axis travel, and 635 mm Z-axis travel. Equipped with a high-speed 12,000 rpm spindle, ISO 40 taper, and a 24-tool arm changer. Includes a 4-axis continuous table and chip conveyor. Ideal for complex machining tasks. Contact us for more information about this machine.

This 3-axis AWEA AF-650 vertical machining center was manufactured in 2017. It features a table size of 750 x 510 mm, can handle a maximum load of 500 kg, and offers axis travels of X = 650 mm, Y = 510 mm, Z = 510 mm. Equipped with a high-speed spindle at 20,000 rpm and a Fanuc 0i-MF CNC control, its ideal for precise machining tasks. Contact us for more information about this machine.

CNC controller: Heidenhain iTCN530 Axes X-axis travel mm: 1.250 Y-axis travel mm: 620 Z-axis travel mm: 620 C-axis degrees: 360º (0,001º) B-axis degrees: ±115 (0,001º) Worktable Table dimensions mm: 1.350 x 620 Max. workpiece weight kg: 1.000 Spindle Spindle speed rpm: 15.000 Spindle drive power kW: 22 / 17 Spindle torque Nm: 387 / 466 Tool system Tool holder: SK 40 Tool magazine slots: 60 Max. Tool Diameter: 150 Max. Tool Length mm: 220 Max tool weight kg: 7 Tool-to-tool time s: 3 Equipment Electronic Handwheel Signal lamp Tool breakage probe Paper band filter Chip conveyor with built-in scraper RENISHAW OMP 40-2 4th and 5th axis Lehmann (ø400 x 40mm x 40kg) ...

The machine is in good technical condition, after prior agreement it is possible to test it. Number of controlled axes: 3 Cast iron structure, prismatic guide surfaces Spindle taper: ISO 40 Max. speed 8000 rpm Power (continuous/30min): 7.5/11kW 2 gears Table dimensions: 1050x600mm Max. workpiece weight: 850kg X/Y/Z axis strokes: 850/600/600mm Tool change: 24pcs.

x-travel: 4.000 mm y-travel: 2.100 mm z-travel: 1.000 mm taper ISO: ISO 50 Number of revolutions: 5.000 rpm table-size: 4.020x2.010 mm table weight: 12.000 Kg Control: Heidenhein iTNC530 Tools place: 32 fach rapid taverse: 15.000 mm/min total power requirement: kW weight of the machine ca.: 39 t dimensions of the machine ca.: 10680x5600x5100 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1200 mm y-travel: 600 mm z-travel: 600 mm Control: Heidenhain iTNC 530 spindle speed:: 6000 1/min. spindle taper: 50 SK spindle drive: (S1) 10 kW table surface area: 1300 x 600 mm table load: 1200 kg feed speeds: 1-10000 mm/min rapid travel x/y/z: 20/20/15 m/min distance table - lower edge spindle: 125-725 mm total power requirement: 25 kVA weight of the machine ca.: 7,5 t dimensions of machine: 3600 x 2300 x 3000 mm Equipped with: CNC control Heidenhain iTNC 530 Electr. portable handwheel Spindle oil cooler Tool changer 24-pos., double arm changer - Max. tool diameter 80/150 mm - Max. tool length 250 mm - Max. tool weight 8 kg Preparation for hydraulic machine vice Preparati ...

x-axis: 4000 mm y-axis: 3200 mm z-axis: 1200 mm distance between columns: 2700 mm spindle motor: 50 / 65 kW spindle turning speed range: 15000 U/min distance spindle nose and table: 200 - 1400 mm rapid traverse: m/min table-size: 4020 x 2400 mm workpiece weight: 15 t Control: Heidenhain TNC 640 total power requirement: - kW weight of the machine ca.: 44 t dimensions of the machine ca.: - m Machine equipped with: X, Y, Z, B, C five axes simultaneous movement control - CNC control Heidenhain TNC 640 - 40-position tool changer (HSK-A100) - 2-axis milling head TCH-19F -- B- & C-Axis - X,Y,Z-axis linear scales - IKZ 20bar - Tool off-set - Oil skimmer - Chip conveyor The data for this ad was cre ...

x-axis: 5000 mm y-axis: 4000 mm z-axis: 1400 mm distance between columns: 3500 mm spindle motor: 22/26 kW spindle turning speed range: 6000 U/min rapid traverse: 15 m/min table-size: 5020 x 3000 mm workpiece weight: 16 t Control: FANUC 0i-iMF distance table - lower edge spindle: 200 - 1600 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m 5 Sided Machining Center equipped with: - CNC Control FANUC 0i-MF (10.4 LCD) - ATC 60-fold (BT 50) - Coolant through Spindle - X/Y/Z axis linear guide way - X/Y linear Scales Heads: -- 90 degree head (auto 5 degree indexing) -- 200mm extension 90 degree head (mounted on table) -- 350mm extension head (mounted ...