subcategories
(3rd category level)
Manufacturer:
(Category: 107)
Sell a notching machine from FIM in good condition!
Schechtl MA 300\1 electronic bending bench with foot pedal and hand depth stop in top condition with two new bending rails with legal warranty. Performance 1.25 mm Steel/ Alu 2 mm Usable length 3 meters Weight 1.5 tons Foot pedal Delivery possible Net price 13900.plus VAT There is an invoice with VAT shown If you have any questions, please contact us at 0160/7838365
Inv. Num. : 9031 Type: DEF FA 85 Producer: Soco Generated: Parameters: Machining length: 25–320 mm. Diameter: 25–85 mm.
Guillotine shears Manufacturer: BBM Type: TS-H25-16 Year of Make: 2001 Tool length: 2,550 mm Tool height: 80 mm Max. cutting thickness: 16 mm Max. cutting length: 2,530 mm Max. stroke rate: 15 1/min. Voltage: 400 V Frequency: 50 Hz Control circuit: 230 V Current consumption: 58 A Line fuse: 63 A Hydr. Connection data: 300 bar Pneum. Connection data: 6 bar Weight approx. : 11 to.
Machine Type: Profile Bending Machine Make: COMAC Type: 308 Year of manufacture 2004
Key data: 2540 mm, 1 mm
Pull-out sheet metal support at the front, sheet metal slide placed at the front under the machine, hand back gauge, automatic hold-down device, dimensional grooves in the table Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 2540 mm Sheet thickness steel: 1.0 mm Sheet thickness aluminium: 1.5 mm Colour: blue Machine weight: 500 kg Dimensions: 2800 x 1500 x 1400 mm Cutting gap adjustment fixed Automatic hold-down Fixed cutting angle Back gauge: 650 mm Machine Number: 6.1-5005
Type of press: 2-cylinder synchronized press, pressing force: 125t, rated pressing force: 110t, bending length: 3000mm, ram stroke: 360mm, installation height: 540mm, distance between frames: 2550mm, hydraulic pressure: 256bar, weight: approx. 12000kg, control system: Cybelec DNC 7000 Graphic. Including various tools. The control system and the screen were renewed in mid/late 2025. An on-site inspection is possible.
Key data: 3 mm, 10 mm, 1 mm
Guillotine shears from a company liquidation Worked as a cutting center with automatic stacking device make Theis Control cabinet , built in 2015 new Front support arms 1,000 mm Service regularly performed according to plan 3,000 x 10 mm
Pressing force: 100 t Table length: 3000 mm Table width: 180 mm Passage between racks: electric motor: 10 kW Dimensions lxwxh: 3200x1450x2950 mm Weight: 8,000 kg In good condition, connected with the possibility of testing.
Key data: 1550 mm, 3 mm, 120 1/min
Qty. 1 Second-hand rotary shear cut-to-length line – still in operation Mfc.: PACO E.N.G Built: 2010 Still in operation! Raw Material: CR, EGI, GI, STS, AL, COLOR COATING COILS Tensile Strength Max.: 60 kg/mm2 Strip Width: 300 ~ 1,550 mm Thickness: 0.2 ~ 3.0 mm Coil Weight: 20,000 kg Sheet Length No. 1 Piler: 300 - 2,500 mm No. 2 Piler: 300 ~ 2,500 mm Piling Weight No. 1 Piler: 5,000 kg No. 2 Piler: 5,000 kg Coil ID: ∅508 mm, ∅610 mm = RUBBER SLEEVE Coil OD: ∅800 mm ~ Max. ∅2,000 mm
PROFILE BENDING ROLL SHAFTS OUTPUT 90 MM - PIPE BENDING ROLL MARGI CA90H2 YEAR 2007 SHAFTS SIZE 90 MM SET OF UNIVERSAL ROLLERS SIZE 260 MM LATERAL CORRECTOR ROLLERS LEFT/RIGHT SIDE SCREW ADJUST 4 SET OF ROLLERS FOR TUBE BENDING MM 61 – 78 – 90 – 116 – CONSOLE ELECTRIC MOVABLE ON WHEELS ALL THE COMMANDS CENTRALIZED DIGITAL POSITION READOUT OF BENDING ROLLS UPPER ROLL DRIVEN MOTORIZED ELECTRIC POWERED WITH GEAR UNIT SIDE ROLLERS HYDRAULIC ADJUSTMENT POWERED INDEPENDENT WITH PISTONS CAPACITY CHART IN ENCLOSED FOR MACHINE PERFORMANCES MACHINE REVERSIBLE CAN WORK WITH SHAFTS VERTICAL AND HORIZONTAL SAFETY AND EMERGENCY STOP INSTALLED WITH THE MACHINE MANUALS AND SCHEMATICS DOCUMENTS IN ORIGINAL DIMENSION 1260 X 1000 X H1260 MM -WEIGHT 1000KG
Key data: 3200 mm, 2 mm
used RAS 62.30 folding machine TurboBendPlus, a proven and reliable machine for professional sheet metal processing on roofs, walls and façade. The machine is ideal for tinsmiths, roofers, plumbers, locksmiths and metalworkers who rely on precise work results, robust technology and economic work. The RAS 62.30 impresses with its robust design and the high quality of the manufacturer RAS. It is ideally suited for everyday use Use in the trade and in the workshop. Used machines of this class offer an economically attractive opportunity to combine high-performance technology at a good price. The machine is equipped with a motorized depth stop, that facilitates precise and comfortable work. In addition, it has a segmented upper beam with a height of 110 mm, which makes the machine particularly can be used flexibly for different bending and bending work. This used RAS 62.30 is th ...
4 ROLL HYDRAULIC DUAL PRE-PINCH 3000x15 MM PLATE BENDING MACHINE NEW Brand MG model M3015 -Width of plate 3000 mm -Thickness of plate rolling 15 mm -Thickness of plate pre-bend 12 mm minimum bending diameter ID 350 mm Rolls dimensions: -Surface length mm. 3100 -Top roll mm. 290 -pinch roll mm. 270 -Power electric 10 Hp Technical data: -rolls hardened surface high resistance -variable rolling speed -Powered driven hydraulic rolls rotation -conical bending attachment roller type -calibration system re-rolling welded shells -deflection pinch pressure adjustable upon the thickness -overload protect complete safe operation of the machine. -control console on wheels with electric joysticks commands -position readout digital display for rolling memorize and repeat -safety and emergency systems installed -manuals and schematics along with the machine ...
Key data: 3000 mm, 40 mm, 35 mm
PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM - MODEL 4HCI3-35/30 YEAR 1990 PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE INITIAL PINCH Machine used in good working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 35 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower D 470 mm -side rolls left/right D 420 mm • Hardening of the 4 rolls high strength surface • 3 rolls driven hydraulic powered on gear unit • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening of top roll hydr ...
Key data: 2000 mm, 6 mm, 10 mm
4 ROLL HYDRAULIC PLATE BENDING MACHINE MODEL M2006P _NC EASY COMMAND 15” -MATR. C072/25 MACHINE NEW PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BEND BRAND MG SRL ITALY CNC_PROGRAMMABLE AUTOMATIC PLATE ROLLING Capacity: -Width of plate: 2000 mm -Thickness of plate rolling 6 mm -Thickness of plate pre-bending 4 mm Rolls dimensions: -Surface length mm. 2050 -Top roll mm. 160 - Lower roll mm. 140 Configuration installed: • Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling • Dual pre-pinch, plate edges pre-bend automatic programmable • Conical bending hydraulic attachment - hardened contrast pad. • Power dr ...
Key data: 100 mm, 160 mm, 115 mm
Profile bending machine model PP100 Output shafts 100 mm fully hydraulic operated lower shafts motion independent pyramid pinch -all the 3 shafts driven with gear unit and hydraulic motor -lateral correctors left/right for guiding and align the profile, -Set of rollers complete with extra rollers to seat and bend the various shape of profiles. -7 set of rollers for pipe bending from 1,5” to 4,5” inch ( see photo in enclosed ) -Centralized control panel electric with digital position readout -Safety & emergency installation -voltage 3ph 380/50 -10 Hp -capacity chart in enclosed
Key data: 2000 mm, 23 mm, 18 mm
4-roll plate bending machine Imcar-Italy capacity 2000 x18/23 mm year 1995, model 4RH12/3 , TECHNICAL DATA: Capacity plate width 2000 mm Plate thickness max 23 mm Prebend 18 mm Upper roll 300 mm Lower roll 300 mm Surface useful on rolls 2050 mm Electric 380/50 motor 11 Kw on centralized hydraulic unit Weight 10 Ton Machine dimension 4100x 1750 x H 1550 mm Configuration: Hardened rolls very high surface resistance Conical bending attachment Digital position readout Hydraulic rolls power driven with planetary gear unit Hydraulic side rolls on linear guideways plate prebend Open front drop-end hydraulic to unload the closed shell Safety and emergency installed
Limpet coil roller machine hydraulic To form half round pipe from flat metal strip and bending into wanted radius with spiral continuous. Manufacture MG srl Year 2002 -Shafts output 80 mm -Interchangeable set of molds to form half pipe 60 mm , 90 mm , 115 mm -Coil holder for the reel metal strip with guide-way bench uncoiling and alignment the steel strip to the rolling machine -Pinching lower central roll adjustable to form the half pipe -Digital position readout to determine the bending diameter of the bending, the pitch of the spiral, the shape of the half tube forming -hydraulic arm movable in 3 directions to set the pitch for continuous coil rolling -Upper vertical support hydraulic operated to hold in position the formed diameter and collect the spiral from diameter 700 to diameter 3000 mm -Operator console electric with push button ...
Key data: 5 t, 350 mm, 310 mm
Small Electric Table Press Brake with Spindle Drive TableOne 5 - CoastOne Made in Finland Press force: 5T Bending Length: 350mm Spindles: 1x5T Control: TC15-2D Graphics Back gauge: 1 axis controlled X axis - R axis manual Bending tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; Available now! Viewing under power possible at any time by appointment!
Technical data: - Max. cutting width 2080 mm - Max. cutting capacity at 45 Kp/mm² 6 mm - Column projection 150 mm - Automatic cutting angle adjustment 0.3 - 2 ° - automatic. Cutting gap adjustment - Number of hold-downs 10 pcs - Stroke rate up to 22 1/min - Front angle stop approx. - 2 pcs. front support arms approx. - mot. Back gauge with positioning control up to 1000 mm - Rear space protection with light barrier - Cut line illumination - Working height 860 mm - E - Footswitch - Drive 400 V / 11 kW - Space requirement approx. W 3150 x H 2150 x D 2300 mm - Weight approx. 4.8 t
Omschrijving Lengte mm Aantal Bovenmes H=66,5mm, R=0,8 85gr 835 2 Bovenmes H=66,5mm, R=0,8 85gr 415 2 Bovenmes H=66,5mm, R=0,8 85gr 300 1 Bovenmes H=66,5mm, R=0,8 85gr 150 1 Bovenmes H=66,5mm, R=0,8 85gr 50 1 Bovenmes H=66,5mm, R=0,8 85gr 40 1 Bovenmes H=66,5mm, R=0,8 85gr 20 1 Bovenmes H=66,5mm, R=0,8 85gr 15 2 Bovenmes H=66,5mm, R=0,8 85gr 10 1 Bovenmes H=66,5mm, R=0,8 85gr LEFT 100 1 Bovenmes H=66,5mm, R=0,8 85gr RIGHT 100 1 Ondermatrijs V10, R=0,8, 85gr 835 2 Ondermatrijs V10, R=0,8, 85gr 415 2 Ondermatrijs V10, R=0,8, 85gr 300 1 Ondermatrijs V10, R=0,8, 85gr 150 1 Ondermatrijs V10, R=0,8, 85gr 50 1 Ondermatrijs V10, R=0,8, 85gr 40 1 Ondermatrijs V10, R=0,8, 85gr 20 1 Ondermatrijs V10, R=0,8, 85gr 15 2 Ondermatrijs V10, R=0,8, 85gr 10 1 Totaal 26 Price € 2250,-- New prijs € 3250,--
CONTROLS SIEMENS S5 DECOILER sheet width max.: 370 mm sheet width (min): 80 mmLEVELLER UNIT sheet thickness max.: 2.5 mm sheet thickness min.: 1 mmELECTRICAL SPECIFICATIONS mains frequency: 50 Hz
pressure: 100 tthroat: 620 mmstroke: 0-100 mmhole diameter in sheet thickness: 40 in 20 mmno. of strokes: 49 Hub/minControl: total power requirement: 15 kWweight of the machine ca.: 3.500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2500 mmplate thickness: 3,0 mmdistance between columns: 2550 mmtrue cutting angle adjustable: - back stop - adjustable: max. 510 mmcutting gap adjustment: - mmtotal power requirement: kWweight of the machine ca.: 1,8 tdimensions: 3,3 x 1,4 x 1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1000 mmplate thickness: 3,0 mmdistance between columns: 1050 mmdiameter of upper rolls: 90 mmtotal power requirement: 1,1 KWweight of the machine ca.: 0,47 tdimensions of the machine ca.: 1,7 x 0,8 x 1,35 mmSheet metal bending machine with custom dimensions:- Capacity 1050 x 3.0 mm- Digital display- Hardened rollers- Conical bending- Swiveling top roller- Brake motor- Safety device: Emergency stop cord- Documentation in English- 400VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2540 mmplate thickness: 2,5 mmdistance between columns: 2540 mmdaylight opening: 200 mmtotal power requirement: 2,0 kWweight of the machine ca.: 1,7 tdimensions of the machine ca.: 3,35 x 0,8 x 1,4 mSwivel bending machine with- mechanical backgauge- bending angle preselection- foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
