Manufacturer:
(Category: 104)
GOODWAY GRW-4010 Traveling head Cylindrical grinder YOM 2018 About 600 working hours Control Mitsubishi M70 Distance between centers 1030 mm Max. swing over table Ø 420 mm Max. load between centers 750 kg Max. external grinding diameter Ø 400 mm Roundness 1.5 µm Machine positioning accuracy 2 µm WHEEL SPINDLE Swivel angle 0°~35° Wheel O.D. x width x I.D. Ø 610x Max.100x Ø 203 mm Wheel spindle travel 320 mm Min. setting unit 0.001 mm Max. rapid traverse speed 6 m/min. Grinding feed rate 0.001 - 6,000 mm/min. WORK TABLE Swivel angle -3° ~ +8° Max. rapid traverse speed 10 m/min. Min. setting unit 0.001 mm Grinding feed rate 0.001 - 8000 mm/min. WORK-PIECE SPINDLE Servo Spindle motor -Swivel angle Swivel angle +90° ~ -30° Center taper MT#5 TAILSTOCK Travel 35 mm Center taper MT#5 MOTOR Axes drive motor X-axis 3.5 kW Z-axis 4.5 kW Wheel spindle moto ...
A Schneeberger CNC profile and tool grinding machine including robot cell, coolant filtration system and cooling unit is available. Travel X/Y/Z: 420mm/310mm/340mm, spindle power: 15kW, speed: 6000rpm, spindle interface: HSK80, robot: Fanuc, tool positions: 10. Machine dimensions X/Y/Z: approx. 2500mm/2500mm/2200mm, weight: approx. 9000kg, control: Fanuc 160i-MB, software: Schneeberger Quinto 4, operating hours: approx. 31893h. Documentation available. An on-site inspection is possible.
grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 175 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mGENERALÜBERHOLT Foto von ähnlicher bereits gelieferter Maschine- Schleifscheibenausrüstung LINKS 500mm- Schleifscheibenausrüstung RECHTS 400mm- Innenschleifeinrichtung 120mm für riemengetriebene Innenschleifspindeln (standard)- CNC-Steuerung FANUC 18i-TA- vorbereitet für Messsteuerung Marposs kombiniert (Minialsar, Positionar)mit E5N- B-Achse- Kel-Set- hydraulischer Pinolenrückzug- Mikroverstellung am Reitstock- Werkstückspindelstock mit schwenkbarem Unterteil- Schleifscheibenausrüstung LINKS 500mm- Schleifscheibenausrüstung RECHTS 400mm- Innenschleifeinrichtung 120mm für riemengetriebene Innenschleifspindeln (standard)- CNC-Steuerung FANUC 18i-TA- vorbereitet für Messsteuerung Marposs kombiniert (Minialsar, P ...
grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 175 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mTeilüberholte Maschine mit Messprotokoll nach NeumaschinentoleranzNEUE Steuerung Eckelmann ENCmit BEMA SchleifsoftwareKEL-ASSIST für Kelco 90numerisch gesteuerte B-AchseInnnschleifrinrichtung Dia 80mmSchleifscheibe links Durchmesser 400mmSchleifscheibe rechts Durchmesser 300mmInnenschleifspindel HJN 828hydraulischer ReitstockMikroverstellungKEL SET MesssystemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 175 mmControl: Kelco total power requirement: kWweight of the machine ca.: 4 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Internal grinding machine: grinding diameter: 300 mmgrinding depth: 300 mmTravel distance - Z1: 470 mmTravel distance - X1: 200 mmTilt angle - B2: 1/1000 °power capacity: 3,5 kWExternal and face grinding unit (Z2/X2): Travel distance - Z2: 470 mmTravel distance - X2: 325 mmDrive power – External grinding spindles: 16,5 kW: 120 mmgrinding diameter - cylindrical: 400 mmsanding belt length: 400 mmgrinding wheel size: Ø 500 x 50 x Ø 127 mmWorkpiece spindle unit: Travel distance - U: 470 mmTilt angle – B1 with longitudinal adjustment: -1/+12 °Tilt angle - B1 with workpiece spindle unit: -20/+30 °Manual longitudinal adjustment of the workpiece sp: 470 mmDrive power – workpiece spindle: 3,8 kWturning speeds: 1-895 U/minLoad capacity - Spindle head: 200 kgCentre height above the swing bridge: 200 mmtotal power requirement: 47 kWweight of the machine ca.: 10 tdimensions of the machi ...
Code: 0417 Brand: PEGIC - ITALY Model: DIAMANT 10 - CE Standard Water-cooled sharpening machine and grinder with base for sharpening tools, chisels, drill bits and various tools – CE Standard Technical data: Water-cooled grinding wheel: Wheel diameter 250 mm Hole 25 – Rpm 400 Grinder: Grinding wheel diameter 150 mm Hole 16 – Rpm 2800 Three-phase motor 0,75 Kw Overall dimensions mm 700 x 450 x 1100 h Weight kg 6
Grinding bodies, ceramic grinding bodies, polishing bodies for round vibrators, vibratory grinding systems, vibratory finishing round vibrators, trowal systems, continuous vibrators, ceramic grinding bodies, drying granules, desiccant-Manufacturer: Walther Trowal, drying granulate type GM-Grain: see photos-Price/tax: complete-Transport dimensions: 1200/800/H600 mm-Total weight: 72 kg
grinding diameter: - mmgrinding length: - mmcentre height: - mmdiameter: - mmlength: - mmtool adaptor: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sharpening machine MADO type MNS 630 Type of current: 400 volts, 50 Hz three-phase current Dimensions : 520 x 365 x 368 mm Weight: 17 kg Footprint : 180 x 340 mm With the SUPERSCHLIFF from MADO you can achieve the correct "spherical grind", which is recommended by the experts of leading knife manufacturers. iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60
Ø min/max to be rectified: 3 - 300 mm, Dimensions of the grinding wheel: Ø610xØ304.8x508 mm, Dimensions of the regulating wheel: Ø355xØ152.4x508 mm, Weight: 17000 kg, Power: 100 kW
CNC Surface Grinding Machine LGB R12070 Year of Make: 2005 Internal machine no. 65 Grinding width: 600 mm Grinding length: 1,200 mm X-axis: 1,320 mm Y-axis: 480 mm Z-axis: 730 mm Grinding height above table max.: 520 mm Accessories: Belt filter system Magnetic plate approx. 1,000 x 500 mm
CNC Surface Grinding Machine LGB R12070 Year of Make: 2005 Internal machine no. 65 Grinding width: 600 mm Grinding length: 1,200 mm X-axis: 1,320 mm Y-axis: 480 mm Z-axis: 730 mm Grinding height above table max.: 520 mm Accessories: Belt filter system Magnetic plate approx. 1,000 x 500 mm
Key data: 600 mm, 300 mm
Wagner FSG1224ADIII Grinding path 600 x 300 Magnetic clamping plate 600 x 300 Travel 650mm Travel manual 700mm Grinding removal 99,999mm Drive power 3.7 Kw Touch panel 8" TFT Compensation Training Adjustable adhesive force Automatic Nonwoven Roll Filter Stepless speed control 750 – 2100
Suitable for regrinding and production of wood and metalworking tools of all kinds., Accessories:, Total enclosure, Fanuc robot loader with 6 controlled axes and camera system, Software Toolstudio Standard & Advanced Version 3, Software Helitronic Toolstudio Option Step Tools/Drills, Automatic fire extinguishing system, Drive chiller for all drives, Measuring probe, Oil drip tray, Glass scales on the linear axes, Electrostatic mist collector, Pneumatic workpiece clamping, Automatic, hydraulically actuated steady rest, Measuring mandrel ISO 50, 3 grinding wheel adaptors, Longitudinal movement (X-axis): 400 mm, autom. X‘-axis for moving the workpiece carrier: 110 mm, Vertical movement (Y-axis): 320 mm, Transverse movement (Z-axis): 320 mm, Rotary table swivel range (C-axis): - 110 ° - + / 160 °, Swivel range B-axis (grinding head): +/- 20 °, Workpiece carrier (A-axis): ISO 40, Speed ...
Solver - KS360 - belt sander - Motor power: approx. 1.6 – 2.6 kW - Grinding Length / Material - Endless -Grinding diameter 3 - 70mm - Belt speed: approx. 7.5 – 34 m/s (depending on the pulley) - Drive: Electric motor with belt drive - Sanding belt length: 2,500 mm - Sanding belt width: 5 – 75 mm - Contact washers: Ø approx. 100 – 225 mm - Strap system: 3-roller system Dimensions: LxWxH 0.9x0.7x1.8 meters / Weight 350Kg
DAREX AP 5000 / Precision Twist Drill - Automatic Grinding Machine -CE marking -Grinding range 1.5 - 26 mm -Suitable for standard twist drills (HSS cobalt, optional carbide) -Types of grinding - cone shell grinding as well as automatic cross grinding (split point) to reduce the cross-cutting edge -Automatic operation -Various operations Dimensions: LxWxH 0.5x0.5x0.4 meters / Weight 50Kg
Rotary table surface grinding machine ARTER A 3-16 Hobkn Ausvub Sxs S Tel -Grinding diameter max. 450mm -Grinding height approx. 200mm -Workpiece weight approx. 250Kg -Total power requirement approx. 4KW -Coolant device -Machine enclosure -Work light Dimensions: LxWxH 2.5x1.5x1.7 meters / Weight approx. 3500Kg
Haas UHS 1980 FL Universal Hand Lever Flat Grinder - Tip height 125 mm - Center width 450 mm (optional up to 600 mm) - Grinding length 350 mm - Table clamping area 800 x 115 mm - Max. workpiece weight: approx. 40 kg - Longitudinal movement (X-axis) 350 mm - Transverse movement (Y-axis) 180 mm - Height adjustment (Z-axis) 250 mm - Swivel (horizontal) 360° - Tiltability (vertical) ± 15° to 20° - Spindle speeds 2,800 / 5,600 rpm (gradual) - Drive power 0.75 kW - 1.1 kW - Grinding wheel holder cone 1:10 (standard) - Connection 400 V / 50 Hz - Magnet LxW 255 x 150 mm LxWxH 0.9x1.0x1.4 meters / Weight 650 kg
Walther CN - 550 -PN Mass Grinding Machine and Rösler Z300 Turbo Floc Centrifuge -Walther Trowal CN-550-PN -1460 rpm -550 liter capacity -Motor 3.5 KW -Pneumatic soundproofing cover -Control cabinet -Dirty water / drain device -Compound - Sliding Stones 2xBoxes -Documentation -Dimensions: LxWxH 2x1.8x1.8 meters / Weight 1500Kg -Rösler - Z300 Turbo-Floc / Centrifuge -Year of construction 1996 -Rotor speed 3160 rpm -Power 4 KW -Max. throughput capacity 800 / litres / hour -Documentation -Dimensions LxWxH 1.7x1x1.6 meters / Weight 400Kg Hsbkn Aev Dlzpeu S Tol
WALTHER Trowal Type CA 650 -Drum diameter 1600mm -Speed 1450 rpm -Timer -CENTRIFUGE -Soundproof cover -Stair landing -Power 11KW Hebkswbtdlon Au S Tsl
JUNG D22 / Internal Cylindrical Grinding Machine -Machine suitable for inner round + surface grinding -Smallest grindable bore 14mm -Largest grindable bore 150mm -Grinding length without face grinding device 250mm -Grinding length with face grinding device -6x workpiece speeds 46-270 rpm -Spindle box right/left swivel 30 degrees -Distance of the spindle axis over the center of the table 250mm -Largest workpiece spindle/grinding support distance 935mm -Spindle box / inclined position 30 degrees each -Work table / tilt forward/backward 5 degrees each -Hand/automatic operation -Taper grinding device -Bezel -Three-jaw chuck -Replacement grinding spindles Dimensions: LxWxH 2.8x1.5x1.8 meters / Weight 3500Kg
double grinder, double grinder, column grinder, column grinder, drill grinder -Double grinder with: water cooling -Grinding disc: max. Ø 450 x 63 mm -Speed: 950 rpm -Engine power: 3.3 kW -Operating voltage: 380 volts -Quantity: 1 pieces available -Price: per piece -Dimensions: 370/370/H1090 mm -Weight: 404 kg
CNC gantry grinding machine Ziersch Z1030 Control: Mitsubishi Touch Year of manufacture: 2018 Internal machine no. 64 Travels: Grinding area: 3,000 x 1,200 mm Transverse movement: 1,100 mm Longitudinal movement: 3,500 mm Distance table to spindle center: 1,050 mm Size of the magnetic clamping plate: 3,000 x 1,000 mm Feed longitudinal axis: 5,000 – 30,000 mm / min. Feed transverse axis: 0.01 – 5,000 mm / min. Vertical axis feed: 0.001 – 3,000 mm / min. Power grinding spindle motor: 22 kW Accessories: Belt filter system Electronic handwheel
CONTROLS electronic controls SPECIFICATIONS THROUGH FEED GRINDING MACHINE Working width: 280 mm number of brushing station: 2 BRUSHING UNIT number of brushes: 5 TRANSPORTATION BELT speed min.: 3 m/min speed max.: 10 m/min coolant unit: yes band filtration unit: yes DIMENSIONS / WEIGHTS space requirements -left/right-: 2900 mm space requirements -front/back-: 1250 mm total height: 2200 mm total weight approx.: 4000 kgELECTRICAL SPECIFICATIONS total power consumption: 17 kW mains voltage: 400 V mains frequency: 50 HzFeatures:- 2 x planetary heads (20-200 rpm)- equipped with 5 rotating brushes each, Ø150 mm (500-2800 rpm)Workpiece height:1.5 mm - 30 mm
filling capacity: 400 LiterUsable Volume: 300 Literfilling amount: max. 850 kgworkpiece sizes: max. 850 x 200 mmIndividual weight of workpiece: max. 30 kgturning speeds: 4.0 - 15.0 U/minInner drum width: 925 mmdrive motor: 380 Vweight of the machine ca.: 1950 kg.range L-W-H: 3100 x 1600 x 2000 mm good / well-maintained condition ()- in checked conditions - machinevideo - https://www.youtube.com/watch?v=xxnCddCmXe4Description:- LIMA cleaning machines for long concrete formwork parts, formwork clamps for flame-cutting parts, plasma-cutting parts, laser-cutting parts for punching and sawing parts- environmentally friendly, cost-saving, low-noise- drive with 5-fold V-belt via worm gear- maintenance-free spherical roller bearings- entire machine is highly soundproofed- dust extraction installed as standard- drum running time adjustable- speeds variably adjustable- the drum can be moved into a ...
Ø grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Ø min / max to grinding: 1.5 / 120 mm, Regulating wheel width: 254 mm, Regulating wheel speed nº: infinite, Min / max regulating wheel speed (r.p.m.): 10/250 r.p.m., Dressing (auto / manual): Automatic / Automatic, Lubrication (auto / manual): Automatic / Automatic, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc model: Oi - TF, Cnc axes nº: 6, Infeed (auto / manual): Automatic / Automatic, Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Maximum infeed grinding length: 254 mm, Power hydraulic motor: 0,55 kW, Total power: 27 kW, Voltage: 220/380 V, Long: 1.800 mm, Width: 2.800 mm, High: 1.900 mm, Weight: 6.420 kg, Accessories included:
Ø grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Peripheral grinding wheel speed (m / s): 1,700 RPM, Ø min/max to be rectified: 1.5 - 75 mm, Regulating wheel width: 150 mm, Regulating wheel speed nº: 4, Min / max regulating wheel speed (r.p.m.): 21, 30, 42, 310, Regulating wheel dimensions (od x id x width): Ø250 x Ø140 x 150 mm, Dimensions of the regulating wheel (OD x ID x W): Ø250 x Ø140 x 150 mm, Grinding wheel width: 150 mm, Maximum infeed grinding length: 150 mm, Maximum length to be rectified in plongeé: 150 mm, Motor power grinding wheelhead: 15 Cv, Grinding wheel head motor power: 15 HP, Total power: 16.5 hp, Long: 1.654 mm, Width: 1.500 mm, High: 1.535 mm, Tall: 1.535 mm, Weight: 2.200 kg
