Manufacturer:
(Category: 104)
Max. work-piece diameter: 254 mm Max. distance between centers: 1066 mm Max. length of grinding: 1041 mm Max. capacity of collet chuck: 38 mm Dimensions of standard grinding wheel: 408x25x205 mm Limits of grinding head turning: 45 degrees Centre tapers: Sea #4 Thread pitch: 0.42 – 305 mm Max. pitch correction: 0,1 mm on 100 mm of length Adjustable backing-off: 0-5mm Number of rotation speeds of grinding head: 20 Range of speeds of workpiece slide: 1/3 – 60 rpm Speeds on back-run: 25.4; 80 rpm or working speed Work-piece slide motor capacity: 0.75 HP Grinding head motor capacity: 3.5/1.25 HP Max. obliquity: 1:12 Width limits of grinding wheel: 9.5–75 mm Range of grinding wheel speeds: 850–1540 rpm Internal diameters processable: 19–228 mm Max. diameter of hobs: 178 mm Max. diameter of thread chasers: 254 mm Coolant tank capacity: 136 liters Dimensions: -L ...
grinding length: 6000 mmgrinding width: 500 mmworkpiece height: 250 mmspeed of grinding head: 0,02 - 30 m/mintable width: 700 mmsegment head diameter: 630 mmgrinding motor: 110 kWgrinding wheel speeds: 1500 U/minmagnetic clamping plate: 6200 x 200 mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mPrecision vertical surface grinding machineequipped with :- segment grinding head- magnetic table 6200 x 200mm - inclinable- Traction drive grinding head by direct current via toothed rack- Coolant tankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Grinding length: 600 mm Grinding width: 200 mm Clamping surface of the table: 600 x 200 mm Greatest distance between table and grinding spindle center: 500 mm Grinding wheel dimensions: 250 x 25 x 51 mm Table longitudinal feed hydraulically infinitely variable: 1 - 24 m/min Table transverse feed per hand rotation: 4 mm Grinding spindle speed infinitely variable via DC drive: 800 - 4200 rpm DC drive: 1.5 - 5.0 kW Net weight with control cabinet approx.: 2000 kg Approx. space requirement: 3100 x 1700 x 1900 mm
grinding length: 160 x 400 mmmechanical: ja weight of the machine ca.: 0,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technische specificatiesIngangsvermogen1,5 / 2,4 kWSnelheid1000 + 1500 toeren per minuut WerkstukgegevensMaterialenstaal, roestvrij staal, aluminium, non-ferrometalenDwarsdoorsneden20 x 20 tot 120 x 120 mm20 x 20 tot 150 x 150 mm10 x 10 tot 180 x 450 mmOntbraamtijdsecties 1 – 5, zware werkstukken 4 tot 12 sec.
Technical data: Manufacturer: Lee Yagn Type: LY Workpiece diameter: 1 – 25 mm Dimensions cutting wheel: 180 x 1 x 31.75 mm Grinding wheel dimensions: 100 x 50 x 20 mm Disconnect speed: 2,034 rpm. Grinding speed: 1,130 rpm. Dimensions and weight Weight: 90 kg Condition Condition: Used Functional: Tested and fully functional
width of the strips: 75 mmband length: 2000 mmband speed: 36 m/mintotal power requirement: 4 kWweight of the machine ca.: 82 kgdimensions of the machine ca.: 1000 x 500 x 1150 mmBelt sander Metallkraft MBSM 75-240-1, article no.: 3923272For sanding surfaces, edges and rounding offDescription:- Powerful motors and vibration-free operation for the best sanding results- Quick sanding belt change in seconds thanks to quick-release system- Large surface sanding area thanks to fold-away upper sanding belt cover- Continuous sanding surface after removal of attachments enables sanding of long workpieces too- Can be used with and without extraction- One extraction nozzle on the spark box and one on the rear belt roller- Simple adjustment of the belt run via adjusting screw- Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system- Infinitely tiltable sanding unit- ...
KELLENBERGER 600U Universal Grinder Machine No. 721/441 Distance between centres 600 mm Centre height 125 mm Table orientation 11 degrees Grinding wheel for cylindrical grinding 400 x 50 x 127 mm Motor power 3 kW Spindle speed 1500 / 1700 / 2200 rpm Orientation of grinding wheel holder headstock 270degrees (3 x 90) Grinding wheel speeds 3600 rpm Boring for internal spindle 70 mm Workhead swivel 360 degrees Workhead speeds 20 - 400 rpm Wheelhead motor power : 3 kW Workhead head motor power : 0,9 kW Dimensions 2580 x 1680 x 1670 mm Weight 2200 kg
Very good surface grinding machine Table surface / working area 200 x 600 mm
grinding length: 600 mmgrinding width: 350 mmworkpiece height: mmtotal power requirement: 7,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pipe grinding machine - self-made - Pipe grinding machine with CE marking - Suitable for grinding or surface pretreatment of various pipes - was used for galvanized steel pipes as a surface pre-treatment before painting - could be converted for other materials (other abrasive belts + possibly adjustments in the feeding system) - Control: Mitsubishi - Automatic feeding and ejection from the machine - Several pipes can be fed and ground one after the other and temporarily stored during ejection - Pipes are picked up by gripper and guided through the machine to the ejection - Incl. RL125 field extraction system for extracting the grinding dust - Compressed air is required for the function - Machine is sold without safety device - Year of construction 2011 Specifications - Min. tube diameter: 76 mm - Max. pipe diameter: 200 mm - Min. tube length: 3600 mm - Max. tube le ...
Control: Xpress Cube Grinding width: 600 mm Grinding length: 1,500 mm Grinding height: 500 mm Grinding wheel diameter: 400 mm Table load: 1,200 / 625 kg Spindle drive: 10 – 52 kW Spindle cone: 60 / 75 mm Speed range: 1,450 – 3,500 rpm Accessories: Belt filter system Coolant Mist Extraction Type VMN-V12 Balancing system Magnetic disk
Inv. Num. : 8860 Type: BUAJ 30 CNC Producer: JUNKER Created: 2002 Parameters: Control System: FANUC Series 210i-T Maximum grinding diameter: 400 mm Max. sanding length: 630 mm Weight: 2800 kg
grinding diameter: 350 mmgrinding length: 540 mmcentre height: 175 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m2015 wurde bei Studer der WSS, Reitstock und Werkstücktisch überholt2024 Austausch KGT von X+Z- Achse durch StuderKühlmittelanlage mit MagnetwalzeWerkstückspindelstockReitstockMeßsteuerungAuswuchtgerät DittelLünettePCU-TerminalThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
for twist drills: 3 - 50 mm Ø Acute angle: 90 - 140° Adjustable clearance angle Grinding motor: 2800 rpm, 0.25 kW Gear motor for swivel movement: 0.12 kW Grinding wheel dimensions: 175 x 32 x 20/90 x 20 mm Space requirement: 800 x 550 x 1140 mm
A thread and worm grinding machine Reishauer AG is available. Grinding length: 450mm, clamping length: 700mm, max. grinding diameter: 200mm, max. lead: 80mm, max. workpiece weight: 100g, max. lead angle: +/-25°, grinding wheel diameter: 275mm/350mm, speed: 1850rpm. Machine dimensions X/Y/Z: approx. 2600mm/1800mm/1600mm, weight: approx. 3400kg. Including oil centrifuge, hood, oil mist extraction and various accessories. Dokumentation vorhanden. An inspection on site is possible.
CNC thread and worm grinding machine 5K822B was manufactured in 1990 in the USSR. A major overhaul of the machine was carried out in 2018. The thread grinding machine 5К822В with a wide range of machining capabilities enables a number of complex operations, i.e. grinding of threads and worms, cutting of any type of external and internal threads or milling of keyways. The workpiece is machined using the front and back spindles with mounted grinding wheels of a maximum diameter of 400 mm. In order to achieve the best results, the grinding wheel spindle is mounted on precision hydrodynamic bearings and runs on rolling guides. It is driven by a reliable DC motor with stepless speed adjustment. All this is complemented by the state-of-the-art PRONUM 600 numerical control with its intuitive interface and machining simulation function. All of this makes the 5K822V worm grinding machine an ...
grinding length: 1500 mmcentre height: 180 mmweight of the machine ca.: 3,9 tdimensions of the machine ca.: L: 4900 x 1650x 1800 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A sharpening machine / regrinding machine is offered. Viewing possible by arrangement.
Grinding wheel dimensions (od x id x width): Ø508 x Ø304.8 x 305 mm, Ø min/max to be rectified: 150 mm, Grinding wheel width: 305 mm, Maximum length to be rectified in plongeé: 305 mm, Drive wheel dimensions (OD x ID x W): Ø330 x Ø203 x 305 mm, Regulating wheel motor power: 4 Kw, Grinding wheel head motor power: 37 Kw, Total power: 45 Kw, Long: 3.500 mm, Width: 2.500 mm, Tall: 1.100 mm, Weight: 6.500 Kg
Inv. Num. : 4518 Type: JA 500 A Producer: JUNG Created: 1994 Parameters: Control system: Siemens Operating hours: 10662 h Maximum grinding height of the workpiece: 375 mm Maximum spindle speed: 4200 1/min Minimum travel speed longitudinally (X-axis): 24 m/min Maximum travel speed longitudinally (X-axis): 24 m/min Grinding wheel diameter new: 250 mm Spindle power: 7.5 kW Maximum grinding length without grinding wheel extension (X-axis): 600 mm Maximum sanding length: 200 mm Machine height: 1000 mm Machine length: 3700 mm Machine width: 2100 mm Machine weight: 2,500 kg
CONTROLS CNC controls SIEMENS 840 D WORKING RANGE SURFACE GRINDING grinding length: 1600 mm grinding width: 900 mm workpiece height (max) with largest wheel: 600 mm number of processing axes (excl parallel axes): 3 TABLE (SURFACE GRINDING) table surface (left-right): 1600 mm table surface (front-back): 800 mmSPINDLESTOCK GRINDING SPINDLE X-axis travel: 1700 mm spindle revolutions (max): 1000 /minGRINDING TOOL type of grinding tool: wheel diameter (max): 500 mm borehole: diameter: 203.2 mm width: 100 mmELECTRICAL SPECIFICATIONS total power consumption: 30 kW mains voltage: 400 V mains frequency: 50 Hz
A barely used surface grinding machine Optimum is available. Grinding width: 220mm, grinding length: 470mm, grinding height: 350mm, table dimensions X/Y: 210mm/450mm, max. table spindle center distance: 450mm, grinding wheel dimensions X/Y/Z: 200mm/13mm/31.75mm. Machine dimensions X/Y/Z: approx. 1200mm/1450mm/2000mm, weight: approx. 800kg. Dokumentation vorhanden. An on-site inspection is possible.
An external cylindrical grinding machine Kellenberger is available. Distance between centers: 1000mm, center height: 175mm, max. workpiece diameter: 250mm, travel X/Z: 1000mm/220mm, grinding wheel diameter: 500mm, speed: 1530rpm. Machine dimensions X/Y/Z: approx. 3000mm/1850mm/1750mm, weight: approx. 3150kg. A viewing on site is possible.
A bench grinding machine is available. Grinding wheel dimensions X/Y/Z: 125mm/20mm/20mm, speed: 3420rpm, travel X/Y/Z: 130mm/80mm/65mm, clamping angle range: -10°/25°. Machine dimensions X/Y/Z: approx. 400mm/510mm/360mm, weight: 75kg. Including accessories, three grinding wheels and transport box. Documentation available. An on-site inspection is possible.
A Wotan internal roll grinding machine is available. Workpiece diameter: 1200mm, max. outside diameter: 1000mm, max. bore diameter: 900mm, travel X/Z: 370mm/800mm, swiveling: 15°, table travel: 500mm, grinding depth: 250mm, speed: 220rpm. Machine dimensions X/Y/Z: approx. 5000mm/3000mm/2200mm, weight: approx. 8500kg. Documentation vorhanden. An on-site inspection is possible.
Centerless grinding machine, PARAGON RC16, 200400 G.W., through-feed grinding, under power in our warehouse (see video)
workpiece diameter: 1000 mmworkpiece weight: - kgworkpiece height: - mmControl: grinding wheel motor: 11 kWtotal power requirement: 25 kWweight of the machine ca.: 6500 kgdimensions of the machine ca.: 4100 x 3200 x 2600 mmMachine comes from a plant closureEquipment:Coolant system 500 liters with paper belt filter4 grinding stone (3 of them unused)Technical data:Rotary table diameter 800 mmMax. distance from rotary table to grinding spindle center 850 mmGrinding wheel diameter 400 mmGrinding wheel width 80 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
