Manufacturer:
(Category: 104)
This Schaudt Mikrosa SASL 125 was manufactured in 1989. A centerless external grinding machine, it features NC-controlled operations and hydrodynamic axis bearing. Both wheels can be dressed via a controlled axis. Refurbished by UHLMAN Werkzeugmaschinen-Service in 2021/22, it has been regularly maintained. Consider the opportunity to buy this Schaudt Mikrosa SASL 125 centerless grinding machine. Contact us for more information.
This 3-axis Reform Surface Grinder was manufactured in 1989. It features a working area of 1,200 mm x 500 mm, ensuring ample space for various grinding tasks. The machine is in very good condition and fully functional. If you are looking to get high-quality surface grinding capabilities, consider the Reform Surface Grinder we have for sale. Contact us for further details.
GENERAL CHARACTERISTICS:, Grinding Wheel Dimensions: Ø610xØ304,8x300 mm, Regulating Wheel Dimensions: Ø355xØ152,4x300 mm
Distance between points: 1000 mm, Height of points: 250 mm, Axis B: Accuracy 0.1 , CNC brand: Kelco , CNC model: 90, Left grinding wheel dimensions (OD x ID x W): Ø400 x Ø127 x 63 mm, Right grinding wheel dimensions (OD x ID x W): Ø400 x Ø127 x 50 mm, Rotation of the workpiece head: -30º +120º , Workpiece holder head cone: MK 5, Max. workpiece weight between points: 150 Kg, tailstock cone: MK 4, Counterpoint reed route: 50 mm, Max tangential speed: 32 m/s, High-frequency internal grinding spindle: Ø120 mm, High-frequency internal grinding spindle brand: WARNER model K 3.000, Main engine power: 7.5 Kw, Total power: 26.5 Kw, Max travel Z axis: 1.150 mm, Max speed Z axis: 15 m / min, Work table rotation: 0º to 9º, Max travel X axis: 320 mm, Max speed X axis: 7.5m/min, Long: 3600 mm, Width: 2000 mm, Weight approx.: 5.000 Kg
Distance between points: 1000 mm, Ø max to be rectified: 400 mm, Maximum length to be rectified: 600 mm, Max travel Z axis: 1300 mm, Max travel X axis: 378 mm, Height of points: 205 mm, Ø of the grinding wheel: 600 mm, Grinding wheel width: 63 mm, Maximum width of grinding wheel: 125 mm, Grinding wheel hole Ø: 203 mm, cnc brand: SIEMENS, cnc model: 840D, Main engine power: 22 Kw, Grinding wheel speed: 45 m/s, tailstock cone: mk5, Counterpoint tour: 100 mm, Workpiece head cone: mk5, Workpiece head rotation: 90º, Maximum piece weight: 300 Kg, Working accuracy of the machine: IT4 ISO, Fine taper adjustment +/-: O, 1 mm/a, speed of the working feed of the table: from 0 to 7.5 m/min, Plan dimensions: 4500x3000x2500 mm, Weight approx.: 8000 Kg
Distance between points: 760 mm, Max travel Z axis: 650 mm, Maximum length to be rectified: 430 mm, Max. diameter to be rectified: 250 mm, Height of points: 125 mm, Working wheel dimensions (od x id x width): Ø 406 x Ø127 x 50 mm, Max. grinding wheel diameter: 500 mm, Max travel X axis: 320 mm, CNC brand: FANUC, CNC model: 18TB, Main engine power: 7.5 Kw, Z and X axis resolution: 0.1 µmm, Workpiece holder head cone: MORSE 5, Ø of the hole in the workpiece holder head: 38 mm, tailstock cone: MORSE 4, Rotation speed of the workhead: 8 to 800 rpm, Dimensions (length x width): 2500x2000 mm, Weight: 4700 Kg
Distance between centers: 1000 mm, Height of points: 230 mm, Main engine power: 9.2 Kw, Working wheel dimensions (od x id x width): 500x80x203.2mm, Ø max to be rectified: 460 mm, Tailstock cone: MORSE 4, Workpiece head cone: MORSE 5, Max. Z axis travel : 1115 mm, Max. X axis travel: 260 mm, Approximate dimensions (length x width): 440x370 cm, Approximate Weight: 4700 Kg
Distance between points: 760 mm, Max travel Z axis: 650 mm, Maximum length to be rectified: 430 mm, Working wheel dimensions (od x id x width): Ø406 x Ø127 x 50 mm, Max. diameter to be rectified: 250 mm, Ø max to be rectified: 250 mm, Height of points: 125 mm, Max. grinding wheel diameter: 500 mm, Ø max. molar: 500 mm, Max travel X axis: 320 mm, CNC brand: FANUC, cnc brand: FANUC, CNC model: 18i-T, cnc model: 18i-T, Main engine power: 7.5 Kw, Ø max. wheel: 400 mm, Z and X axis resolution: 0.1 µmm, main motor power: 7.5 Kw, Workpiece holder head cone: MORSE 5, Ø of the hole in the workpiece holder head: 38 mm, Distance between centers: 430 mm, Workpiece head cone: MORSE 5, tailstock cone: MORSE 4, Ø of the workpiece head hole: 38 mm, Rotation speed of the workhead: 8 to 800 rpm, Accessories: FELSOMAT gantry loader with SIEMENS CNC; Coolant system with paper filter; Forkardt automa ...
- Fixed steady rest 4 units- Fixed table dresser for stone dressing- Face plate head and rear support ca 800 mm- Stone grinding speed 27-24 M/Sec- Coolant and filtration system- In feed stone 0,0025 mm- Acurite Dro with Heidenhain scales- Maximum segment wheel 1600 mm
Looking for a high-precision cylindrical grinder for large workpieces? We have a Farrel 50 x 14 CNC Cylindrical Grinder available! This machine is ideal for industries requiring precise concave and convex grinding, ensuring superior accuracy and efficiency.Key Features:- Concave grinding possible- Covex grinding possible- NUM 760 CNC Control- Fixed steady rest 2 x - Stones and Flanches included
- Travelling wheel machine with CROWNING and CONCAVING grinding- Equipped with stones / flanches / lubrication / coolant system - Maximum diameter full size wheel 1550 mm- Work swing over bed 1580 mm- Work load 180.000 pounds (81.000 Kg)- Grinding length 7500 mm
CNC gear rack grinding machine- Automatic grinding head- B-Axis Grinding head ca 20 gr swivel- ARO - KKS coolant tank 8000 L ( size 4400 x 1900 x 2200)- Pendel opperation ( double table)- Dresser automatic- Table dresser
- Digital read out system position slides- 5 stones and flanches- Coolant and Filtration system- CE Mark- Levelling pads included - Full set off books
- Guideway / Slide way / Surface Grinding Machine- Universal grinding head S10 with 110 Degree tilting / 2500 Rpm / 7.5 kW- Vertical grinding head S30 with Ø 600 x 150 / 930 Rpm / 22 kW- Double SIEMENS 840D Controll panel Left & Right side machine- KNOLL HL650/4000 Filtration system new 2023- Automatic doors (4x) for easy machine / load / clamping acces- Hydraulic table drive with 18000 Kg Work load- Rebuild in 2012 for 1.5 Mil EUR- Large package flanches and stones- Large package spare parts / ballscrews / measuring / protection covers
Technische specificatiesIngangsvermogen1,5 / 2,4 kWSnelheid1000 + 1500 toeren per minuut WerkstukgegevensMaterialenstaal, roestvrij staal, aluminium, non-ferrometalenDwarsdoorsneden20 x 20 tot 120 x 120 mm20 x 20 tot 150 x 150 mm10 x 10 tot 180 x 450 mmOntbraamtijdsecties 1 – 5, zware werkstukken 4 tot 12 sec.
- CNC Dresser KW with Siemens 840D new in 2002 - HeidenHain measuring scales - Siemens Servo engines - Crankshaft and External grinding - Large steady rest package - Large stone and flanch package
- Self centerring device- Double column slide ways- Dressing Unit- Tailstock by rack & pinion- Eccentric adjustment 0 - 20 mm- Large Cone-Stone tooling package
MAX DIAMETER 320 , MAX LENGTH 500
grinding diameter: 155 mmgrinding length: 400 mmcentre height: 80 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 500 mmgrinding width: 200 mmworkpiece height: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 5000 mmgrinding width: 600 mmworkpiece height: 600 mmmagnetic clamping plate, electical: 5000 x 550 mmmax. dia. of grinding wheel: 420 x 127 x 100 mmautom. vertical feed: 0,001-9,999 mmtotal power requirement: - kWweight of the machine ca.: 15 tdimensions of the machine ca.: ca 11 x 2,5 x 3,5 moverhauled machineequipped with:- magnetic clamping plate 5000 x 550mm- hydraulic Unit- Vertical Head- inclined diamond dresser with autom. feed / adjustable speed- coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Reinecker Universal Tool Grinding Machine WZS-50 CNC Precision Grinding Machine Profile Grinding Machine Hersteller [manufacturer]: Reinecker Type [ type]: WZS-50 CNC Control unit: Siemens Sinumerik 880G Baujahr[construction year]: 10/1992 Incl. extinguishing system Incl. various accessories Travel axis: X – Y – Z – C – E Interface Type: E32R Weight [weight]: 3000kg Approx. (L x D x H): 3m x 3m x 3m Full documentation is available. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Price, from stock here plus VAT. Condition: good - ready for demonstration Delivery: from stock - as seen Payment: purely net - upon receipt of invoice Prior sale, errors excepted. We ask for your order. Other machines and systems available from stock – please inquire. We look forward to seeing you. Phon ...
Number of axes: 3, operating hours: unknown, with control system, belt filter, and extraction unit, without documentation or spare parts, not maintained on a regular basis, without maintenance records. An on-site inspection is possible.
Key data: 1500 mm, 600 mm
Surface Grinding Machine - Horizontal ELB-SCHLIFF Perfect BD 15 SPS Used machine as good as new Machine was completely rebuilt Control cabinet new, motors new, wiring new, control system new Hydraulics new, fairing new, Grinding length: 1500 mm Grinding width: 600 mm Workpiece height: 600 mm Table clamping surface: 1500 x 600 mm Grinding wheel dimensions: 400x100x127 mm Grinding spindle motor: 11 kW Table speed: 2 - 30 m/min Grinding wheel speed: 5 -35m/sn Total power requirement: 25 kW Machine weight approx.: 5.6 t Approx. space requirement: 4.2 x 2.5 x 2.5 m General overhauled in 2026 with 12 months warranty Paper filter machine Oil cooler Adjustable feet Line-up included Instruction included
Suitable for automatically grinding chip breaker grooves in HSS, segmented and TCT circular saws. Accessories: Control system for automatic offset of grinding spindle,, coolant system,, stepless adjustable working rate,, machine light., 1 sawblade mount., Circular saw blade diameter: 165 - 630 mm, Tooth pitch: 3 - 50 mm, Saw blade thickness: 2 - 6 mm, Working speed: continuously adjustable from 24 - 50 z/min., Grinding wheel diameter: 25 and 30 mm, Grinding wheel width: 0.3/0.4 and 0.5 mm, Connected load approx.: 0.4 kW (400 V / 50 Hz), Weight approx.: 210 kg, Dimensions W x D x H approx.: 1020 x 900 x 1620 mm, colour: light grey RAL 7047
grinding diameter: 630 mmgrinding length: 3000 mmcentre height: 315 mmgrinding wheel size: 750 x 100 x 305 mmgrinding wheel width: 150 taper: MK 6 chuck diameter: 315 mmgrinding head swivelling: 90 Gradgrinding spindle head - swivable: 30 °table - swivable: 4,30 - 6,30 Gradgrinding spindle speed: 815 / 935 U/minspindle speeds: 8 - 57 / 28 - 150 mmgrinding sp.stock-cross tvl. frwd/rear/total: 420 mmgrinding head quick motion: 80 mmtable speed -stepless-: 0,05 - 4,5 m/minworkpiece weight: 1200 kggrinding spindle drive: 22 kWControl: Siemens 840D total power requirement: 56 kVAweight of the machine ca.: 13 tdimensions of the machine ca.: 9900×2980×1875 mmThe machine is suitable for grinding cylindrical and conical workpieces usinglongitudinal and plunge grinding methods. The table movement, the feed movement of the grinding headstock, and the tailstock quill return are hydraulically oper ...
