Belt sander, make UNKNOWNTechnical specifications:Band width: 40 mmSupport table: 400 x 265 mmExternal dimensions: 550 x 700 x 1500 mmWeight approx: 80 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
width of the strips: 150 mmband length: 2000 mmband speed: 29,0 m/sekgrinding width: 460 x 150 Plantisch mmDust suction hood: 100 mmtotal power requirement: 4,0 kW 100% EDweight of the machine ca.: 84,0 kgrange L-W-H: 1080 x 520 x 1000 mmDescription :- Good sanding performance due to high belt speed- Quick adjustment for horizontal and inclined position- Continuous flat grinding surface for optimal grinding of long workpieces- Constant belt tension through spring-loaded tensioning device- Universally applicable for grinding edges, surfaces and for cylindrical grinding- Including quick-release system for quick strap changes- Simple adjustment of the parallel belt run by means of an adjusting screw- Graphite coating on the flat grinding surface increases the sliding properties of the sanding beltScope of delivery :- Sanding belt K 80- Hinged protective screen- Sanding and support table- ...
Band dimensions: 150 x 2000 mm speed: 14.5 / 29 m / sec. Contact plate: 200 mm / 155 mm plan grinding table diameter: 460 x 150 mm Extractor connection: 100 mm in diameter engine power: 4 kW
width of the strips: 75 mmband length: 2000 mmband speed: 29,0 m/sekgrinding width: 460 x 75 Plantisch mmDust suction hood: 100 mmtotal power requirement: 3,0 kW 100% EDweight of the machine ca.: 66,0 kgrange L-W-H: 1080 x 440 x 1000 mmDescription :- Good sanding performance due to high belt speed- Quick adjustment for horizontal and inclined position- Continuous flat grinding surface for optimal grinding of long workpieces- Constant belt tension through spring-loaded tensioning device- Universally applicable for grinding edges, surfaces and for cylindrical grinding- Including quick-release system for quick strap changes- Simple adjustment of the parallel belt run by means of an adjusting screw- Graphite coating on the flat grinding surface increases the sliding properties of the sanding beltScope of delivery :- Sanding belt K 80- Hinged protective screen- Sanding and support table- wo ...
Special price for stock goods! Only while stocks last! Belt dimensions: 75 x 2000 mm Belt speed: 29 m/sec. Contact disc Ø x W: 200 / 80 mm Face grinding table: 460 x 75 mm Suction connection Ø: 100 mm Motor output power S1 100%: 3.0 kW Motor input power S6 40%: 4.0 kW Voltage: 400 V Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 66 kg Characteristics: - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous face grinding surface for optimal grinding of long workpieces - Constant belt tension due to spring-loaded clamping device - Universally applicable for grinding edges, surfaces and cylindrical grinding - Including quick clamping system for fast belt changes - Easy adjustment of the parallel belt run by means of adjustment screw - Graphite coating on the face grinding surface increa ...
Band dimensions: 75 x 2,000 mm speed: 14.5 / 29 m / sec. Contact plate ø x B: 200 / 80 mm plan grinding table: 460 x 75 mm suction connection Ø: 100 mm motor power output S1 100%: 2.4 / 3.0 kW absorbed motor power S6 40%: 3.0 / 4.0 of kW voltage: 400V dimensions (L x W x H): 1080 x 440 x 1000 mm weight about: 67 kg
offer 22730 Specifications: - Sanding belt dimensions 2000 x 75 mm - Surface grinding opening 450 x 75 mm - Sanding belt speed 30 m/sec - Drive pulley + contact plate 75 x 200 mm - Drive 380 V / 3 kW - Working height 475 - 1240 mm - Space requirement approx. W 580 x H 1250 x D 1000 mm - Weight approx. 85 kg
power requirement: 750 Wattturning speeds: 2.500 - 8.000 U/min.weight of the machine ca.: 2,7 kgThe BOSCH GGS 8 CE Professional is ideal forSuitable for sanding surfaces.techn. Dater BOSCH GGS 8 CE Professional is ideal forSuitable for sanding surfaces.techn. Data :- Idle speed: 2,500 - 8,000 rpm- Tool holder: collet up to 8 mm- Nominal input power: 750 W- Output power: 420 W- Spindle neck Ø: 43 mm- max.collet Ø: 8 mm- max.grinding wheel Ø: 50 mm- max.polishing tool Ø: 80 mm- Vibration (OF grinding up to Ø25 / Ø50): 2.5 / 2.5 m / s²- Sound pressure level: 82 dB (A)- Weight net / gross: 1.7 / 2.7 kg:- Idle speed: 2,500 - 8,000 rpm- Tool holder: collet up to 8 mm- Nominal input power: 750 W- Output power: 420 W- Spindle neck Ø: 43 mm- max.collet Ø: 8 mm- max.grinding wheel Ø: 50 mm- max.polishing tool Ø: 80 mm- Vibration (OF grinding up to Ø25 / Ø50): 2.5 / 2.5 m / s²- Sound ...
width of the strips: 100 mmband length: 2000 mmband speed: 15/30 m/sectube diameter: 20 - 76 mmangle adjustable from - to: 30 - 90 Gradtotal power requirement: 3,3 / 400 kW / Vweight of the machine ca.: 0,2 tdimensions of the machine ca.: 1,45 x 1,15 x 0,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
25 € Description: consisting of, 1x cordless screwdriver 18V DCF809 1x cordless flashlight 2x cordless drills various batteries and battery chargers .weight approx.: 10 kg, dimensions (l x w x h) approx.: 400 x 400 x 400 mm
5 € Description: in metal box, with various attachments Location: A-6751 Bludenzweight approx.: 2 kg, dimensions (l x w x h) approx.: 450 x 300 x 100 mm
Year: ca. 1968 width of the strips: 50 mmweight: 300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 150 mmband length: 2280 mmband speed: 22 m/sectable-size: 700 x 350 mmroll diameter: 140 / 80 mmmotor speeds:: 2880 1/minrange L-W-H: 1300 x 800 x 1500 mmtotal power requirement: 3,0 kWweight of the machine ca.: 250 kgHorizontal belt grinder- Small, flexible all-rounder- Solid gray cast iron unit - long-lasting, good grinding results- Motorized tape oscillation approx. 10mm- Pneumatic belt tension- Small table on the pulley for grinding radii and shapes- The entire sanding belt can be used thanks to the height-adjustable work table- Including angle and miter fenceSpecial equipment:- swiveling grinding unit 90 - 135 degrees- Support table on the pulley The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 150 mmband length: 2280 mmrevolutions per minute: 2880 U/minroll diameter: 140 / 80 mmtable-size: 700 x 350 mmengine output: 3,0 kWweight: 250 kgrange L-W-H: 1300 x 800 x 1500 mmFurnishing :- Horizontal belt grinder- Small, flexible all-rounder- Solid gray cast iron unit - long-lasting, good grinding results- Motorized belt oscillation approx. 10 mm- Pneumatic belt tension- Small table on the pulley for grinding radii and shapes- The entire sanding belt can be used thanks to the height-adjustable work table- Including angle and miter fenceSpecial equipment included:- swiveling grinding unit 90 - 135 degrees- Support table on the pulleyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Container grinding system For internal and external grinding of frames diameter 500 to 4000 mm, length 5000 to 12000 mm From lace floor surfaces and hemispherical floors with diameters of 500 to 4500 mm From cones and brewhouse hoods diameter 500 to 4000 mm composed of: 1 piece grinding system with jacket and floor grinding head 1pcs jacket / frame turning device 1 piece floor turning device
Belt sanding machine as good as new / little used • Sanding belt width max.: 150 mm • Sanding belt length: 2000 mm • Belt speed max.: 30 m/s • Total engine speed: 1500/3000 rpm • Total engine power: 2.6/3.1 kW • Weight: 82 kg • Gross weight: 80,600 kg Machine foot with double suction Extremely stable machine base with integrated double suction.
width of the strips: 75,0 mmband length: 2.000 mmband speed: 30 m/secgrinding width: 75 x 430 mmengine output: 3,0 kWweight: 75 kgFurnishing:- powerful belt sander- including machine baseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Factory new with dust extraction automatic belt centering Tool-less change of the sanding belt Sanding belt 60 grit 2000 x 75 mm Band width 150 mm Plan grinding range 500 mm Belt speed 15 / 30 m / s Weight 120 kg Motor pole change-over bar 2.2 / 3,75 kW Suction motor 0.37 kW Machine dimensions 950 x 430 x 1050 mm Lieferumpfang: incl. belt 60 grit Connection cable with CEE plug 16 A Dust bag 1 year warranty including packaging and transport in Germany
High-quality construction Drive roller is crowned (thus the sanding belt centered automatically centered on the role) and fully Vulcanized for longest life and best smoothness Tool-less and allow fast, easy change of the sanding belt Stepless height adjustment for optimal setup of the belt sander on the user Free adjustable metal fence to the optimal and safe guide workpieces during use of the large plan grinding area Speed design optimized for burning of the workpiece during the machining can be excluded as far as possible Models with fume control system equipped with robust and flexible suction hose Motor protection switch with CEE collar Steckvorrichtung incl. phase inverter 5 year warranty on the motor 1 year warranty on the belt sander Strap length: 2000 mm Band width 75 mm Plan grinding range 600 mm Speed 15/30 m/s RAL 9007 colour Motor three-phase 400 V 3.0/3,75 kW Suction capa ...
Belt grinding machine Frommia 805 27-06-189 Delivery time: immediately Number: 27-06-200 Machine data Year of construction: 1972 L x W x H: approx. 1000 x 800 x 600 mm Weight: approx. 350kg Very good general condition Belt grinding machine Other accessories on request Price and other technical data on request
Inv. Num. : 6074 Type: GR-2300-900-WWB Producer: GRINDINGMASTER Created: 2002 Parameters: Sanding belt length: 1900 mm Sanding belt width: 930 mm Cutting thickness: 1-150 mm Rated current: 44 kW Weight: 2350 kg Machine dimensions: 2700 x 2000 x 2000 mm
Wide belt sanding, brush deburring and grinding machine make GRINDINGMASTERType MCSB / B2 1300 make -No: TN 1431-04 built in 1991Working width: 1300 mmBrush size: 1300 x 300 mmSanding belt size: 1900 x 330 mmMax. Material thickness: 150 mmPower of the contact roller: 16 kWPower of the stainless steel brushes with oscillating oscillation: 15 kWPerformance of the stainless steel brushes Mit- u. Counter-oscillation: 15 kWContinuous flow rate: 3 - 18 m / minAir requirement: 70 l / min / 6barDimensions L x W x H approx .: 2200 x 3000 x 2200 mmWeight approx. 2500 kgWith- 3 deburring stations- wet execution- Dryer- FilterfliesanlageusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. ...
Belt grinding machine make GRITTechnical specifications:Tape Width: 150mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
Belt grinding machine GRIT GI 150 2H, switchableSerial -No: 1121152 Year 2011with surface grinding module GIL and radius grinding module GIRTechnical specifications:BELT SANDERBelt dimensions approx.: 150 x 2000 mmSpeed: 3450 rpm.Voltage: 3 x 400/440V 50/60HzWeight approx. 80.6 kgwith- Machine foot GIB Serial-No: 1120014 year of manufacture 2011 Weight approx. 17 kgSURFACE GRINDING MODULE GILSerial-No: 1114072 built in 2011Tape dimensions approx.: 150 x 2000 mmDimensions of profiles/flat material max.: 100 x 100 mmVoltage: 3 x 400V 50/60HzApprox. weight: 69 kgfor longitudinal grinding of square tubes, profiles and flat materialsRADIAL GRINDING MODULE GIRSerial-No: 1124121 year of manufacture 2011Band dimensions approx.: 150 x 2250 mmDimensions of profiles/flat material max.: 120 x 150 mmTubes up to diameter: 20 - 150 mmWeight approx. 109 kgwith- integrated depth stop for series u ...
width of the strips: 100 mmband length: 915 mmdimensions of grinding wheel: 100 x 915 mmwork table:: 225 x 155 mmtotal power requirement: 0,44 kWweight of the machine ca.: 0,018 tdimensions of the machine ca.: 0,56 x 0,26 x 0,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 100 mmband length: 915 mmdimensions of grinding wheel: 100 x 915 mmwork table:: 225 x 155 mmtotal power requirement: 0,44 kWweight of the machine ca.: 0,018 tdimensions of the machine ca.: 0,56 x 0,26 x 0,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 100 mmband length: 1220 mmband speed: 1140 m/min.: 0,62 x 0,4 x 0,35 cmtotal power requirement: 1,5 kWweight of the machine ca.: 0,04 tdimensions: 0,97 x 0,67 x 0,37 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 150 mmband length: 1220 mmdimensions of grinding wheel: 225 mmwork table:: 150 x 400 mmTable tiltable up to: 90 Gradtable surface area: 150 x 130 mmconnected load frequency: 230 Vtotal power requirement: 0,75 kWweight of the machine ca.: 35 Kgdimensions of the machine ca.: 650 x 360 x 400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 150 mmband length: 2000 mmband speed: 33 m/sectotal power requirement: 4 kWweight of the machine ca.: 100 tdimensions of the machine ca.: 1,2 x 0,5 x 0,85 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 100 mmband length: 915 mmdimensions of grinding wheel: 200 x 32 mmgrinding wheel hole diameter: 30 mmtotal power requirement: 0,9 kWweight of the machine ca.: 35 Kgdimensions of the machine ca.: 620 x 540 x 300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 100 mmband length: 915 mmdimensions of grinding wheel: 200 mmwork table:: 170x125 / 265x150 mmtotal power requirement: 0,5 kWweight of the machine ca.: 26 Kgdimensions of the machine ca.: 0,6 x 0,5 x 0,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 75 mmband length: 2000 mmband speed: 30 m/sectotal power requirement: 3 kWweight of the machine ca.: 70 tdimensions of the machine ca.: 1,2 x 0,5 x 0,75 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 100 mmband length: 2000 mmband speed: 15/30 m/sectube diameter: 20 - 76 mmangle adjustable from - to: 30 - 90 Gradconnected load frequency: 400 Vtotal power requirement: 2,5 /3,3 kWweight of the machine ca.: 0,19 tdimensions of the machine ca.: 1,2 x 0,75 x 0,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
connected load frequency: 230 Vweight: 4,7 kgrange L-W-H: 620 x 240 x 180 mmoutput: 0,8 KWgrinding band dimension: 40 x 760 mmtube diameter max.: 180 mmband speed: 2,4 - 9,1 m/sThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 150 mmband length: 2000 mmband speed: 30 m/mingrinding range: 150 x 540 mmvoltage: 400 V / 50 Hztotal power requirement: 3 kWweight of the machine ca.: 110 Kgdimensions of the machine ca.: 1x0,5x1 mArt.-No.16680The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 50 mmband length: 1000 mmtotal power requirement: 0,55 Voltrange L-W-H: 550 x 450 x 350 mmweight - pallet system: 25,0 kgFurnishing:- Transportable combination belt grinder- Workpiece support surfaces- Disc grinding station- Surface grinding station- CE declaration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Horizontal belt sander Italian makeBandwidth: 130 mmPad size: 500 x 130 mmDrive power: 0.9 hpPower connection: 380 V, 50 HzDimensions L x W x H: 800 x 400 x 1000 mmused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
offer 22651 Rotor blade inside belt grinding machine Specifications: - mobile version with motorized forward - reversing + steering -Mot. Grinding stroke forward – reverse with speed regulation - Grinding stroke longitudinally forward + backward -Mot. Contact pressure - grinding pressure regulation - Sanding belt dimensions approx. 2000 x 50 mm - Contact wheel W 60 / D 300 mm - Pneumatic connection 6 bar - Drive 400 V / 2880 rpm / 7 kW - Space requirement approx. W 5700 x H 1200 x D 1400 mm - Weight approx. 800 kg
Technical data: - Edge grinding machine for edge processing on - welded boxes, cabinets, safes, etc. - Control SIEMENS for clocks + oscillation - max. grinding height approx. 1200 mm - Grinding belt dimension 100 x 2240 mm - Grinding belt speed 12 + 24 m/s - Grinding unit swivelling - 2 magnetic clamping plates - Mot. Grinding dust extraction - Pneumatic connection 6 bar - Drive 400 V - Space requirement approx. W 2500 x H 2000 x D 2000 mm - Weight approx. 1500 kg
The machine can be viewed from 18.01.2023 at the location 94036 Passau by appointment. Specifications: - Sanding belt dimensions approx. 3500 x 5 to 75 mm - Contact wheel diameter up to approx. 12 to 300 mm - Drive pulleys 100 to 225 mm - 2 sanding belt speeds - Heights + depth adjustable contact wheel / grinding roller - Drive 400 V / 4.0 kW - Space requirement approx. W 700 x H 1700 x D 1400 mm - Weight approx. 200 kg
band width: 100 mmband length: 3500 mmband speed: 21 - 36 m/secgrinding diameter: 10 - 200 mmfeed speeds: 0 - 20 m/minKontaktscheiben-Ø: 200 - 400 mmVorschubräder - Abmessung: 200 x 75 x 56 mmmaterial: Gummi Absaugstutzen: NW 120 voltage: 380 V / 50 HzMotordrehzahlen: 2910 U/minpower capacity: 5.5 kWweight of the machine ca.: 0,6 t• Machine with 2 roller conveyors (Length: 2 m) for roller passageThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Horizontal + Vertical Belt Grinding Machine Make: LÖSER Type: BS 200 Machine No. Xxxx Built: ca. 1990 Technical data: - infinitely negotiable position of work - Grinding belt dimension approx. 200 x 1550 mm - Grinding belt speeds approx. 15 / 30 m/sec. - Speeds 1450 / 2900 rpm - Drive 400 V / 1.3 / 1.5 kW - Support table with suction 320 x 180 mm - Working height in horizontal position 940 mm - mot. Grinding dust extraction - Space requirement approx. W 950 x H approx. 1600 x D 800 mm - Weight approx. 120 kg
Contact grinding machine / contact belt grinding machine make SOLDER type KS 350Make -No: 1520Sanding belt length: 3500 mmGrinding belt width: 5 - 75 mmDrive disc Diam: 180 mmBelt speed: 13.5 + 27 m / minDiameter of the pipes: 3 - 180 mmFeed rate: 0 - 25 m / minDrive power: 3.2 / 4 kWused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
Contact grinding machine / contact belt grinding machine make SOLDER type KS 350Machine -No: 4559 built in 1984Sanding belt length: 3500 mmGrinding belt width: 5 - 75 mmDrive disc Diam.: 180 mmBelt speed: 13.5 + 27 m / minDiameter of the pipes: 3 - 180 mmFeed rate: 0 - 25 m / minDrive power: 3.2 / 4 kWWith- mot. Turning and feed drive- Feed and transport rollersused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
Contact grinding machine / contact belt grinding machine make LÖSER type KS 350Machine -No: 6258 built in 1992Technical specifications:Abrasive belt length: 3500 mmAbrasive belt width: 5 - 75 mmDrive pulley diameter: 180 mmBelt speed: 13.5 + 27 m/minTube diameter: 3 - 180 mmFeed speed: 0 - 25 m/minDrive power: 3.2 / 4 kWWith- Additional device BC 350- roller transport unit on both sidesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
Wet three-roller belt grinding machine make LÖSER type KS 355Machine -No: 503Technical specifications:Abrasive belt length: 3500 mmMax. contact roller width: 120 mmContact washers: 200 x 80 mmNumber of contact rollers:3Power connection: 380 V / 50 HzDrive power: 2.2 kWWith- Wet grinding device- Sanding belt with one sanding position- pneumatic belt tensionusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
width of the strips: 100 mmband length: 1000 mmbelt speed: 10/20 m/sThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
-Emassing 2m long; 1.3m wide; 1.1m high -400V; 50Hz; 10kVA; 35A -11.5KW Qvcdc9vbp -Pneumatics 6bar -grinding belt 300mm wide; 4088mm long; -Speed 15-30 m/s -ca 77 dbA -Wet grinding direction 0.24kW; 90l/min -Fuell quantity 115liter -Weight 250kg
Flat belt grinding machine make MAFAC type NT 300 SFabr. -No: 417643 Year 1986Tape dimensions: 2000 x 300 mmBelt speeds: 6, 8, 10, 12, 16, 20 m / srequired air pressure: 5 - 6 barDrive power: 9.3 kWDimensions L x W x H: 1440 x 1200 x 2047 mmWeight approx: 500 kgWith- Table motorized vertical and horizontal- wet grinding device- pneum. belt tension- Deburring and chamfering deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
Vertical wet belt grinding machine make MAFAC type V 100Masch. -No: 88174543 Year 1988Sanding belt dimensions: 20-100 x 3500 mmStand projection: 500 mmTable size: 650 x 650 mmWidth of the contact surface: 100 mmBelt speed through polswitchable motor: 12.5 m / sAir pressure: 5-6 barOscillation approx: 0 mmDrive motor 380 V: 21 kWWeight: 430 kgSpace required: 840 x 1180 x 1760 mmwith saucer approx: 2050 mm highWith- Compl. electr. Facility- belt oscillation- pneum. belt tension- Belt filter automat- sep. control cabinet:used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
