Manufacturer:
(Category: 101)
x-travel: 880 mmy-travel: 630 mmz-travel: 630 mmB - axis: -120 / + 30 °NC- swivellable rotary table - Ø: 700 mmcontrol: iTNC530 Heidenhainnumber of spindle speeds: 10.000 1/minspindle taper: SK 40 DIN 69871max. torque at 40% / 100% load: 28 / 19 kWtool change unit: 2 x 16 Pos.table-size: 1250 x 700 mmtable load capacity: 650 kptotal power requirement: 44 kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: 3,50 x 3,20 x 2,60 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 500 mm, 420 mm, 380 mm
CNC Vertical Machining Center DECKEL MAHO DMU 50 eVolution With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 500 Y 420 Z 380 Speed range: 0 – 18000 rpm infinitely variable ( SK 40 ) With the following accessories: 2-Axis NC Swivel Rotary Table 500mm x 380mm Vertical tool changer with 32 magazine positions Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 3 D Probe Coolant Setup 4 Height Adjustable Machine Shoes Operating Instructions
Manufacturer: MAZAK Model No.: Variaxis i-800 NEO Year 2023 Condition Used Stock number 9210 Mazatrol Smooth Ai control system Work table length 800 mm Work table width 630 mm Maximum table load (uniform) 1000 kg Maximum vertical spindle speed 18000 1/min X-axis travel 750 mm Y-axis travels 890 mm Travel Z axis 600 mm Taper HSK A100 Number of axles 5 pieces Number of Stacking Positions 80 Pieces Machine height 3497 mm Machine length 2695 mm Machine width 4890 mm Machine weight 18080 kg Equipment: Chip conveyor Handwheel Blowing air on the workpiece Air cooling through the spindle Workpiece rinsing Oil Mist Separator (Gx1000) Smooth Cam AI M Renishaw RMP600 Workpiece Probe High pressure unit (70 bar) Camera in the machine working room Coolant coolers Renishaw PRIMO LTS Tool Probe
Manufacturer HERMLE Model C40 U Dynamic Year 2006 CNC control HEIDENHAIN iTNC 530 Table Table surface Ø 800 mm. Tilting rotary table INCLUDED Maximum weight on table 1400 kg Table rotation (C-axis) 0.001º (±360º) Oscillation field (B-axis) +25 / -110 º Direct Measurement System INCLUDED Maximum part diameter 840 mm. Routes and advances Strokes (X/Y/Z) 850/700/500 mm X, Y, Z axis fast feed 60,000 mm/min Head Head speed 18,000 r.p.m. SK 40 Head Cone DIN 69871 Main motor power 15 W Main torque 130 Nm Equipment Automatic tool loader INCLUDED No. of positions in tool loader 38 Internal cooling 80 Bar INCLUDED Tank with paper filter 200 l. INCLUDED Active cooling control cabinet INCLUDED Infrared measurement probe part M&H INCLUDED Blum Laser Probe Measurement Tool INCLUDED Chip evacuator INCLUDED Cleaning gun with pump 2 bar 40 l/min INCLUDED 3D Quick ...
A CNC machining center is offered. Control: CNC control with control panel. Equipped with workholding fixture and coolant system. The boards are presumably defective. Inspection possible by prior arrangement.
A Maho 4-axis CNC machining center is offered for sale. X/Y/Z travel: 600mm/500mm/400mm, tool holder: ISO 40, max. spindle speed: 6000rpm, feed rate: 6m/min, rapid traverse: 13m/min, operating hours/power-on hours: approx. 58569h, control: Philips CNC 432. Equipped with through-spindle coolant supply with high-pressure pump, fully enclosed splash guard, automatic tool changer, 2-pallet changer and chip conveyor. The main spindle is defective and has already been removed from the machine. The machine is not operational. Documentation available. An on-site inspection is possible.
A CNC machining center with T-slot table is offered. Control: HURCO Ultimax with dual-screen console. Equipped with several fixtures mounted on the machine table, coolant system and available HURCO documentation including training documentation for the Ultimax CNC control. Inspection possible by appointment.
x-axis: 2200 mmy-axis: 1700 mmz-axis: 750 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control: WinMaxTravel ranges:X/Y/Z: 2200 x 1700 x 750 mmSpindle speed: 12,000 rpmTool holder: SK 40 Big PlusDrive power: 18/26 kWTool changer: 40-stationTable clamping surface: 2100 x 1600 mmDistance from spindle nose to table: 150 – 900 mmEquipment/Accessories:Workpiece positioning detection and tool length calibration via probeDirect measuring system (X/Y/Z axes)Production package for high-performance chip removalInternal coolant supply (ICS) 20 barChip conveyorCoolant system (1050 liters) with belt filter unitCoolant spray gunChip splash guard enclosureMachine status signal lightLED machine lightSet of machine leveling padsParts list and circuit diagrams on CDProgramming and maintenance manuals via control help functionThe data for this ad was cre ...
: 0550 mm: 410 mm: 480 mm: 650x410 mm: BBT 40 : 10.000 U/minMotor Capacity: 7,5/11 kWmax. table load: 500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0760 mm: 450 mm: 500 mm: 900x450 mm: BBT 40 : 10.000 U/minMotor Capacity: 7,5/11 kWmax. table load: 850 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0760 mm: 430 mm: 460 mm: 900x410 mm: SK 40 : 8.000 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- incl. Coolant system with 20 bar IKZ- incl. Paper filtration system- incl. Heidenhain HR 410 Remote Handwheel-
Important note: the spindle was replaced in 2025 for approx. 40,000 EUR, therefore few spindle hours!The pallets are clamped on the rotary tilting table.Incl technical documentation and HSK-E 40 tool holders and three pallets.additional technical data: • rapid traverse: max. 30 m/min
With technical documentation as well as workbench and accessories such as HSK-E 40 tool holders, equipped with tools.Additional technical specifications:• Table T-slots quantity: 5 pcs• T-slots dimensions: 18H12• Distance HSK holder - table: 550 mm• Feed drive X-, Y- and Z-axis: Traversing speed: 30 m/min• Dimensions of the workbench: approx. 1500 x 900 x 1100 mm
Key data: 1000 mm, 800 mm, 500 mm
Technical Specifications • CNC Control Unit: DIALOG 112 • Axis Travels (X, Y, Z): • X-axis: 1000 mm • Y-axis: 800 mm • Z-axis: 500 mm • Work Table: • Table dimensions: 1250 x 800 mm • Maximum table load: 1200 kg • Spindle: • Tool taper: SK 40 / HSK-A63 (depending on configuration) • Maximum spindle speed: 15,000 rpm (up to 18,000 rpm for hi-dyn versions) • Spindle drive power: approx. 10 / 15 kW • Tool Changer (ATC): • Magazine capacity: 30 positions (some variations have 60) • Max. tool weight: 12 kg
Key data: 450 mm, 600 mm, 330 mm
Manufacturer: Hermle Model: C 22 U Year: 2018 Condition: Used Stock number: 8975 Control system: Heidenhain TNC 640 Switch-on hours: 23,000 h Number of axles: 5 pieces X-axis travel: 450 mm Y-axis travel: 600 mm Travel travel Z-axis: 330 mm Speed: 18000 1/min Cone: HSK-A63 IKZ: 80 bar Tool holders Internal air supply through the spindle Left scraper conveyor Blower device Additional hopper ZM192 Coolant mist extraction Blowing air through the center of the spindle Rinsing gun Blum calipers Blum Tool Gauge LC50 TL200 Equipment: Chip conveyor Rotary table (320 mm)
vertical machining center, year 2007, CNC S4045FD. Used machine. More info & price on IndustrialBuyer.
Manufacturer: FERMAT Model: WFC 10 CNC Year: 2020 Condition: Used Stock number: 9555 Control System: FANUC Series Oi-MP Operating hours: 1100 h Work table length: 1120 mm Work table width: 1000 mm Maximum table load (uniform): 5000 kg Maximum spindle speed: 3000 1/min X-axis travel: 1250 mm Y-axis travel: 1250 mm Travel travel Z-axis: 1250 mm Cone: ISO 50 Spindle diameter: 100 mm Machine height: 3308 mm Machine length: 3822 mm Machine width: 5883 mm Machine weight: 17735 kg
1 gebr. Column drill, Flott SB 23 Technical data (Flott SB 23) • Drilling capacity: approx. 23 mm to 25 mm in steel (continuous drilling capacity approx. 23 mm) • Max. drilling depth / stroke: 140 mm • Projection: approx. 300 mm • Spindle holder: MK 2 (Morse taper 2) • Speed range: Variable depending on the version (often approx. 100 to 2,000 rpm via gearbox/V-belt) • Column diameter: approx. 82 mm to 125 mm (depending on the construction generation) • Work table: approx. 415 x 385 mm (with T-slots, height adjustable by hand crank) • Motor power: approx. 0.9 kW to 1.4 kW (pole-switchable) • Electrical connection: 400 V / 50 Hz (three-phase current) • Machine weight: approx. 220 kg to 280 kg • Total height: approx. 1,950 mm
double-table traveling column boring machine Software/CNC: Siemens Sinumerik 840D X: 18000 mm - Y: 5000 mm - Z: 1750 mm - W: 1400 mm - B: 360° - V: 3000 mm - U: 400 mm Table dimensions: 4000x3000 maximum workable height 5000mm
5-axis machining center, year 2016, CNC Doosan-Fanuc i. Used machine. More info & price on IndustrialBuyer.
bore capacity in steel (diameter): 35 mmthroat: 330 mmbore stroke: 180 mmtable surface area: 765 x 620 mm0: 130 - 1750 U/minfeed: 0,1 - 0,2 - 0,3 mm/Utool taper: MK 4 total power requirement: 3,0 kWweight of the machine ca.: 0,7 tdimensions: 1,2 x 0,8 x 2,15 mDrilling machine with:Power feed2 gear stagesTapping attachmentFootswitchMachine lightCoolant systemEmergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
HNK HPM Double Column 5-Face Machining Center Year: 2011 CNC: Fanuc 31i-MA Status: Under power Main specifications: X travel: 10,250 mm Y travel: 6,400 mm Z travel: 800 mm W travel: 2,000 mm Table: 4,000 × 10,300 mm Work area: 4,000 × 10,000 mm Maximum load: 50,000 kg Between columns: 5,300 mm Height clearance: 2,600 mm Spindle: 5–6,000 rpm Spindle power: 22/25 kW Maximum torque: 600 Nm Ram: 380 × 380 mm Tool shank: BT50 ATC: 60 tools Scales on X/Y/Z/W CTS Rigid tapping Right-angle head Extension head 2 chip conveyors + chip bucket This is a very large-capacity HNK machine designed for heavy and oversized workpieces, with 5-face machining capability and a maximum table load of 50 tons. The machine is currently under power and available for inspection.
Column drill Ixion BS 30GL with reinforced motor. Year of construction: 1998. lead screw included. Also included are two drill masters, each with three threaded spindles, as well as an additional spare board.
bore capacity in steel (diameter): 32 mmarm length: 950 mmturning speed range: 51 - 1000 U/minturning speeds steps: 12 bore spindles - Morse Taper: MK 4 quill stroke: 160 mmfeed range: 0,075 x 0,3 mm/mintable surface area: 1200 x 510 mmtotal power requirement: 2 kWweight of the machine ca.: 1,9 tdimensions of the machine ca.: 1,8 x 1,2 x 2,25 mHigh-speed radial end mill with- Thread cutting attachment- Vertical table 750 x 620 mm- Horizontal table 1200 x 510 mm- Emergency stop device- DocumentationMachine-No. 445The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mmarm length: 1230 mmtable surface area: 1200 x 500 mmbore stroke: 180 mmfeed - independent: 0,10 - 0,15 - 0,20 - 0,30 mmturning speeds: 45 - 1370 U/mintaper MK: 4 total power requirement: 2,7 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2,2 x 1,8 x 2,3 mQuick radial with:- Feed- Thread cutting deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mmthroat: 280 mmbore stroke: 145 mmtaper MK: 3 MKtable-size: 540 x 480 mmfeeds: 0,08 bis 0,32 mm/Uturning speeds: 180 - 2000 U/mintotal power requirement: 3,0 KWweight of the machine ca.: 0,9 tdimensions: 1,2 x 0,8 x 2,4 mColumn drilling machine with:- Power feed- Thread-cutting attachment- Coolant pump- Machine light- Incl. machine vice- Emergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine is in good technical condition and can be tested by prior arrangement. It is fully functional. It is equipped with a new tool magazine but comes without a workpiece probe, clamping fixtures, or tools.
50.000 € 
