Manufacturer:
(Category: 101)
x-travel: 600 mmy-travel: 410 mmz-travel: 500 mmControl: HEIDENHAIN TNC 530 HSCI table surface area: 800x400 mmT-slots: 3 T - slots distance: 125 mmtable weight: 450 Kgrapid traverse: 30.000 mm/mintaper ISO: ISO 40 DIN 69871 number of spindle speeds: 12.000 U/min/rpmSpindle power: 10/17 magazine: 20 Internal cooling system: 20 barChip coveyor: inkl. handwheel: HEIDENHAIN HR-410 total power requirement: 25 kWweight of the machine ca.: 4.150 kgdimensions of the machine ca.: m-T-slots (width, spacing) 18, 125 mm-Distance from table to floor 885 mm-Distance from table to spindle nose (min./max.) 140 / 650 mm-Type Chain-Tool selection Random-Max. tool diameter with adjacent pockets empty 135 mm-Max. tool diameter without adjacent pockets empty 85 mm-Max. tool length 250 mm Max. tool weight 6 kg-Workpiece cleaning gun Included-Optical measuring systems (glas ...
x-travel: 1.035 mmy-travel: 560 mmz-travel: 510 mmcontrol: 810 D 3D ShopMill SiemensMain spindle:: turning speed range - main spindle: 20 - 8.000 min/-1power capacity - main spindel: 13 / 9 kWmax. Torque: 83 / 57 Nmtool taper: SK 40 DIN 69871work table:: table surface area: 1.200 x 560 mmmax. table load: 1.000 kgtable height over floor: 720 mmTool-Presetter:: number of toolpositions: 20 pos.max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 300 mmchange time: 1,6 secchange-time chip to chip: 7,0 secfeeds:: rapid traverse: 25 m/mintotal power requirement: 17 kVAweight of the machine ca.: 4,1 tdimensions of the machine ca.: 4,0 x 4,0 x 2,5 mChip conveyor: Automatic Tool Changer: Coolantsystem: Spray gun: elektr. hand wheel: Signal-Light: CNC - Machining Center VerticalDECKEL MAHO - DMC 1035 V Ecoline- only 2,300 spindle hours- only 13,700 power-on h ...
CNC woodworking machining centre with six adjustable support beams and vacuum pods. Equipped with operator control cabinet, separate control pedestal, foot controls, extraction hoses, safety fencing and floor safety mats, as pictured. Electrical data shown on the control cabinet nameplate: 400 V AC, three-phase, 50 Hz, 29 A, 17.1 kW. Made in Italy. Becker vacuum pump details: - Type: VTLF 2.250/0-79 - Year: 2013 - Serial number: 2714056 - Frequency: 50 / 60 Hz - Power: 5.5 / 6.4 kW - Speed: 950 / 1150 rpm - Inlet capacity: 244 / 286 m³/h - Maximum vacuum: 200 / 200 mbar Auction-ID: A1-50699-9
CNC woodworking machining centre with adjustable workpiece supports and vacuum pods. Supplied with control cabinet, operator control panel, foot pedal, extraction hoses, safety fencing and Becker VTLF 250 vacuum pump, as pictured. Vacuum pump nameplate details: - Brand/type: Becker VTLF 250 - Year: 2004 - Serial number: A 1939039 - Motor rating: 5.5 / 6.4 kW - Speed: 950 / 1150 rpm - Inlet capacity: 248 / 300 m³/h - Vacuum: 200 / 200 mbar Auction-ID: A1-50699-8
5-axis machining center Hedelius ACURA 65 incl. standby magazine Control: TNC 640 Year of Make: 2017 Internal machine no. 80 Travels: X-axis: 700 mm Y-axis H / V: 650 / 465 mm Z-axis: 600 mm Swivel table: Ø 650 x 540 mm Swivel range: +30° to -115° Table load: 500 kg Mount: DIN 69871 AD 40 Tool magazine: 65 – compartment Spindle speed: 50 - 14,000 rpm Accessories Standby magazine 180 seats Inclined bed coolant system SKM 900 Chip conveyor LTA Suction 3D Probe Rinsing gun KinematicOpt
CNC Machining Center Hedelius C 100 -3500 Magnum Control: Heidenhain iTNC 530 Year of Make: 2009 Internal machine no. 79 Travels: X-axis 3,500 mm Y-axis 1,000 mm Z-axis 770 mm Clamping area 4,150 x 1,000 mm Pendulum operation: 2 x 1,450 x 1,000 mm Table load: approx. 4,500 kg Mount: HSK 63 Tool magazine: 70 – compartment Spindle speed: 20 – 12,000 rpm Accessories - Handheld operator - Chip conveyors - Paper tape filter system - 20 bar coolant system
5-axis machining center Hedelius RS 805 K Control: Heidenhain iTNC 530 Year of Make: 2011 Internal machine no. 78 Travels: X-axis 1,500 mm Y-axis 800 mm Z-axis 600 mm Mount: SK 40 Tool magazine: 30 compartment Spindle speed: 12,000 rpm Accessories: - SKM 900 inclined bed coolant system - IKZ 25 bar - Chip conveyors - Handheld operator - Blow-off guns - Rinsing guns
4 BAZ Heller 3 x BAZ Heller H5000 BJ 2019 and 2021 1 x BAZ Heller MCH 250 BJ 2001/2009
5-axis machining center, year 2011, CNC Professional 5. Used machine. More info & price on IndustrialBuyer.
horizontal machining center, year 2001, 39195 operating hours, CNC Professional 3 (Fanuc 16i-M). Used machine. More info & price on IndustrialBuyer.
vertical machining center, year 2007. Used machine. More info & price on IndustrialBuyer.
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Morse taper sleeve: MK2 6 pieces -Type: Reducing sleeve MK2/1 -Dimensions: Ø 19/92 mm -Price/Fee: complete -Transport dimensions: 57/38/H92 mm -Total weight: 0.6 kg
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Morse taper sleeve: Adapter sleeve, reducing sleeve MK5/3 -Dimensions: Ø 45/170 mm -Weight: 1.2 kg
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Morse taper sleeve: MK5 6 pieces -Type: Reducing sleeve MK5/4 -Dimensions: Ø 45/170 mm -Price/Fee: complete -Transport dimensions: 135/90/H170 mm -Total weight: 6 kg
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Morse taper sleeve: MK3 3 pieces -Type: Reducing sleeve MK3/1 -Dimensions: Ø 24/100 mm -Price/Fee: complete -Transport dimensions: 72/24/H100 mm -Total weight: 0.6 kg
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve MK6 -Type: Reducing sleeve MK6/5 -Dimensions: Ø 64/220 mm -Number: 6x Morse taper sleeves available Price: per piece -Weight: 2.5 kg/pc.
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve MK6, 2 pieces -Type: Reducing sleeve MK6/4 -Dimensions: Ø 64/215 mm -Submission/Price: complete -Transport dimensions: 128/64/H215 mm -Weight: 3.4 kg
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Morse taper sleeve: MK4 11 pieces -Type: Reducing sleeve MK4/2 -Dimensions: Ø 31/125 mm -Price/Fee: complete -Transport dimensions: 175/60/H125 mm -Total weight: 4.4 kg
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Morse taper sleeve: MK4 21 pieces -Type: Reducing sleeve MK4/3 -Dimensions: Ø 32/140 mm -Price/Fee: complete -Transport dimensions: 160/160/H140 mm -Total weight: 8.4 kg
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Morse taper sleeve: MK4 11 pieces -Type: Reducing sleeve MK4/1 -Dimensions: Ø 32/125 mm -Price/Fee: complete -Transport dimensions: 175/60/H125 mm -Total weight: 5.5 kg
Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Morse taper sleeve: MK3 17 pieces -Type: Reducing sleeve MK3/2 -Dimensions: Ø 25/113 mm -Price/Fee: complete -Transport dimensions: 150/140/H113 mm -Total weight: 3.4 kg
Key data: 70 mm
Column Drill Make: IBARMIA Type: B 70 Drilling capacity: Ø 70 Gear Drill -with drill feed -Coolant pump in the base -Drilling depth shutdown -Spindle mount MK-5 -Column diameter: Ø 240 mm -Drill ejection Height: 2550 mm Depth: 940 mm Width: 620 mm Table size: 660 x 780 mm Weight: approx. 1,300 kg with machine vice, mechanical-hydraulic Make: HILMA Wingspan: adjustable No guarantee, no return, no warranty Transport from the hall is carried out by the seller, at the expense of the buyer. Loading on trucks is done by the seller, at the expense of the buyer. Corresponding truck (load capacity) provided by buyer.
Column drills Optimum, Simatec and Ibarmia
The machine is in good technical condition; it can be tested by prior arrangement.
The machine is in good technical condition; it can be tested by prior arrangement.
Arboga UM 3008 Drilling-Milling Machine -Drive: Gear (gear head) -Motor: 2-stage motor (3-phase / 380 V or 400 V) -Spindle speeds: 8 steps, 105–3,020 rpm -Tool holder: MK 3 (Morse taper 3) -Drilling capacity (steel): approx. 30 mm -Drilling depth (quill stroke): max. 130 mm (adjustable) -Max. distance spindle-table: 600 mm -Cross table dimensions: 585 × 245 mm -Adjustability head: height-adjustable and swivel in angle Dimensions: LxWxH 0.9x0.8x1.9 meters / Weight 600Kg
x-travel: 800 mmy-travel: 1050 mmz-travel: 850 mmcontrol: Siemens 840D Celos Main spindle:: power capacity - main spindel: 35/25 kWSpeed Mainspindle: 18000 min/-1max. Torque: 288 Nmtool taper: HSK 63 Swivel range: -30/+180 °work table:: table surface area: dia. 800 mmmax. table load: 1800 kg0: dia 950 x 1450 mmc-axis: 360 x 0,001 °Tool-Presetter:: number of toolpositions: 30 pos.max. tool diameter: 120 mmmax. size of tooling: 550 mmmax. tool weight: 15 kgfeeds:: rapid traverse ( X / Y / Z ): 60 m/mincapacity: - kVAweight of the machine ca.: 15 tdimensions of the machine ca.: 4,47 x 2,35 x 3,2 m5 Axis Machining Center - Universal- CNC Control Siemens 840D Celos- Automatic Swivel Milling Head wit B-Axis- ATC 30-fold (HSK 63)- Coolant with Paperbandfilter & IKZ 20 bar- Chip Conveyor- ProbeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1.000 € 
