2,391 grinding machines used for sale

Tool grinding machine with Knoll belt filter system Machine ready for demonstration

A Saacke CNC tool grinding machine including a Felsomat tool loader is available. Center height: 170mm, travel X: 580mm, feed X: 20m/min, table dimensions X/Y: 980mm/185mm, travel Z: 250mm, feed Z: 20m/min, travel Y: 250mm, feed Y: 10m/min. B-axis horizontal swivel: 240°, swivel speed: 120°/s, motor spindle diameter: 170mm, speed: 10000rpm, torque: 10.7Nm. Tool positions: 24, tool holder: HSK-C50, A-axis indexing accuracy: +/-15°, error at 100mm diameter: 8µm, workpiece holder: ISO 50, speed: 50rpm. Control: NUMROTOplus V.3.8.3m, resolution X/Y/Z: 0.0001mm, resolution A/B: 0.0001°. Includes Felsomat Robotal RE 01 loading unit with rotary indexing table, FB703 small extinguishing system, and Brinkmann FBS-238/50 screw spindle pump. Documentation available. An on-site inspection is possible.

A grinding cell (grinding cabin) SHL with an ABB robot and two grinding units is available. 1) 2x SHL DKS 250/450+DPE-G, year of manufacture: 2012, contact wheel diameter range: 250mm-450mm, spindle speed: 3500rpm, spindle diameter: 35mm, grinding belt length: 3500mm, max. belt width: 100mm, machine dimensions X/Y/Z: approx. 1200mm/900mm/1900mm, weight: approx. 700kg. 2) ABB robot. 3) Grinding unit SHL P550. 4) Pallet conveyor system. 5) Regrip station. 6) Grinding cabin with control cabinet, overall system dimensions X/Y: approx. 5500mm/4900mm. Including controls, license key, fixtures and tools. The system can be collected as seen, dismantling is not required. Documentation available. An on-site inspection is possible.

DECKEL S11 Sharpener TECHNICAL FEATURES: Wheel diameter: 125 [mm] Workpiece Spindle Nose: ISO 40 Paper Filtration: No Supply voltage: 400 [V] Installed power: 2 [kVA] Dimensions: 1100 x 800 x 1760 Weight: 520 [Kg] EQUIPMENT INCLUDED: x1 Universal Divider with Quick Indexing – Part Number: 255X0X x10 divider rings for fast indexing x1 tailstock with transverse adjustment – Ref.: 2621000 x1 tailstockwith vertical adjustment – Item No.: 2624000 x1 complete swivel bracket – Article No.: 2626000 x1 Grinding Unit (Concave or Convex) – Item No.: 2628000 x1 1 Universal Depth Gauge – Part Number: 2570000 x1 1 helical sharpening device – Article No.: 2580000 x1 draft grinding slide – Item no.: 2673000 x1 universal vise – Ref.: 2635000 x1 optoelectronic measuring unit with microscope – Part Number: 2650012 x2 RSF-Elektronik digital axis visualizatio ...

CNC-Zahnstangenschleifmaschine- Automatic grinding head- B-Axis Grinding head ca 20 gr swivel- ARO - KKS coolant tank 8000 L ( size 4400 x 1900 x 2200)- Pendel opperation ( double table)- Dresser automatic- Table dresser

- CNC Dresser KW with Siemens 840D new in 2002 - HeidenHain measuring scales - Siemens Servo engines - Crankshaft and External grinding - Large steady rest package - Large stone and flanch package

- Travelling wheel machine with CROWNING and CONCAVING grinding- Equipped with stones / flanches / lubrication / coolant system  - Maximum diameter full size wheel 1550 mm- Work swing over bed 1580 mm- Work load 180.000 pounds (81.000 Kg)- Grinding length 7500 mm

- Guideway / Slide way / Surface Grinding Machine- Universal grinding head S10 with 110 Degree tilting / 2500 Rpm / 7.5 kW- Vertical grinding head S30 with Ø 600 x 150 / 930 Rpm / 22 kW- Double SIEMENS 840D Controll panel Left & Right side machine- KNOLL HL650/4000 Filtration system new 2023- Automatic doors (4x) for easy machine / load / clamping acces- Hydraulic table drive with 18000 Kg Work load- Rebuild in 2012 for 1.5 Mil EUR- Large package flanches and stones- Large package spare parts / ballscrews / measuring / protection covers

- Magnetic table 600 x 350 mm- Closed housing for CE- Senkrechtautomatik SA- Automatic lubrication- Coolant tank 

- Self centerring device- Double column slide ways- Dressing Unit- Tailstock by rack & pinion- Eccentric adjustment 0 - 20 mm- Large Cone-Stone tooling package

- Sturdy, cast iron execution of all machine components- High machine weight for maximum rigidity- Preloaded precision linear guideways in the vertical- and cross axis (Bosch Rexroth) for highest accuracy- Scraped and turcite coated slideways in the longitudinal axis provide excellent vibration absorption and a high-quality grinding surface pattern.- Hydraulic longitudinal motion with return cooling unit to achieve good surfaces- Electro-mechanic cross- and vertical motion- Measuring systems in vertical axis (Heidenhain) for precise positioning- Maintenance-free paper band filtration unit with up to 500 l tank and 2-bar pressure pump for effective cooling and rinsing- Integrated rinsing channel- Magnetic separator for prefiltration of the paper band filtration unit- Infinitely variable grinding spindle motor- Machine lamp- Table-mounted dressing device for high precision and surface fini ...

- Covex and Concave grinding- 6 steady rest included- 2 steady rest hydrostatic- Coolant system with magnetic filter - Measuring system with 5 arms caliber:- Arm 1: Working area 1300 to 1600 mm- Arm 2: Working area 1000 to 1300 mm- Arm 3: Working area   700 to 1000 mm- Arm 4: Working area   400 to   700 mm 

Looking for a high-precision cylindrical grinder for large workpieces? We have a Farrel 50 x 14 CNC Cylindrical Grinder available! This machine is ideal for industries requiring precise concave and convex grinding, ensuring superior accuracy and efficiency.Key Features:- Concave grinding possible- Covex grinding possible- NUM 760 CNC Control- Fixed steady rest 2 x - Stones and Flanches included

- Fixed steady rest 4 units- Fixed table dresser for stone dressing- Face plate head and rear support ca 800 mm- Stone grinding speed 27-24 M/Sec- Coolant and filtration system- In feed stone 0,0025 mm- Acurite Dro with Heidenhain scales- Maximum segment wheel 1600 mm

- Tool cutter grinder- Max. Radius 45 Gr- Side X Travel 40 mm- Length Y Travel 10 mm- Head spindle Z Travel 15 mm- Indexing raster 12 x- Machine incl. collet device 0,5 to 17,5 mm- Milling cutting attachment for Mk1, Mk2, Mk3- incl. HERKT Traunreut Projector for secure grinding- incl. HSS Grinding attachment from 3 to 18 mm

honing diameter: 45 mmstroke: 1000 mmthroat: mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m4 spindle honing machine for gunsHoning area according to the manufacturer:Diameter 5-45mmMaximum Honing Length 750mmAccessories:Honing tools for diameter:-10mm-12,3mm-13,3mm-21,1mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC cylindrical grinding machine STUDER S33 TECHNICAL FEATURES: NC Type: FANUC 21i-TB Software version installed: StuderGrind Distance between toes: 1000 [mm] Peak height: 175 X-axis travel: 285 [mm] Minimum speed. X-axis stroke: 0.001 [mm/min] Maximum speed X-axis travel: 5000 [mm/min] X-axis resolution: 0.0001 [mm] Z-axis travel: 1150 [mm] Minimum speed. Z-axis travel: 0.001 [mm/min] Maximum speed Z-axis stroke: 10000 [mm/min] Z-axis resolution: 0.0001 [mm] B-axis angular travel: -15 [°] / +195 [°] Hirth B-axis indexing accuracy: 1 [°] Automatic B-axis: Yes Coin Holder Spindle Nose: MT5 Minimum speed. Coin Holder: 1 [RPM] Maximum speed Workpiece Spindle: 1500 [RPM] Maximum weight permissible headstock between points : 120 [Kg] Tailstock Cone: MT3 Tailstock sleeve stroke: 35 [mm] Diameter of tailstock: 50 [mm] Tailstock fine adjustment: +/- 40 [mm] Suppl ...

table length: 600 mmtable width: 380 mmcontrol: FANUC 0-M longitudinal travel: 500 mmcross travel: 300 mmlargest grinding diameter: 230 mmJig grinding machine | HAUSER - S35-400The machine is in a well-maintained condition.Please note that the technical details were added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: S35400 | S35 400 | S35CNC400 | S35 | S-35 | S 35The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 600 mmtable width: 380 mmcontrol: FANUC 16-M longitudinal travel: 500 mmcross travel: 300 mmlargest grinding diameter: 230 mmJig grinding machine | HAUSER - S35-400The machine is in a well-maintained condition.Please note that the technical details were added from comparable machines.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: S35400 | S35 400 | S35CNC400 | S35 | S-35 | S 35The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I hereby make you the following offer: Automatic grinding machine B1 CNC 4-axis control for 2 grinding units + NC axis for magazineing. The production time is halved by the 2-grinding units. It is a new machine that was only used for experimental demonstrations. Year of Make: 2005 Working range: approx. 30 - 200mm diameter By converting clamping bells to a chuck, this machine also metal and ceramic parts can be processed.

rotary table diameter: 600 mmgrinding height: 600 mmgrinding head - power requirement: kWworkpiece weight: 300 kggrinding wheel diameter: 600 mmpower spindle motor: 15 kWgrinding height: 600 mmControl: SIEMENS STC weight of the machine ca.: 19 tdimensions of the machine ca.: 4,7 x 3,6 x 2,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WORKING RANGE SURFACE GRINDING  grinding length: 400 mm  grinding width: 163 mm  vertical travel: 200 mmTABLE (SURFACE GRINDING)  magnetic table: optional MAGNETIC TABLE  length: 350 mm  width: 150 mm  height: 50 mmSPINDLESTOCK GRINDING SPINDLE  X-axis travel: 483 mm  Y-axis travel: 171 mm  Z-axis travel: 179 mm  spindle revolutions (max): 2800 /minGRINDING TOOL  type of grinding tool: wheel   diameter (max): 178 mm  borehole: diameter: 32 mm  width: 13 mmELECTRICAL SPECIFICATIONS  total power consumption: 1.5 kW  mains voltage: 380 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1650 mm  space requirements -front/back-: 825 mm  height above floor le ...

G+H precision external cylindrical grinding machine RS 600 CNC / P for machining multiple diameters in a single setup, in plunge or oscillating mode. Grinding table driven by a digital servo axis, ball screw with a 10 mm pitch, axis speed 0.01 mm/min - 15 m/min, positioning via linear scale, resolution 0.001 mm, V-flat slide guide, guideways are Turcite-B coated. Disc feed support driven by a digital servo axis, ball screw with a 5 mm pitch, axis speed 0.01 mm/min - 10 m/min, positioning via linear scale, resolution 0.0005 mm, V-flat slide guide, guideways are Turcite-B coated. Workpiece headstock with digital servo spindle, positionable with initiator for detecting the reference mark, adjustable 0-1000 rpm; 2.7 kW power, MK5 taper bore, max. grinding diameter 260 mm. Tailstock with hydraulically operated quill, fine adjustment of cylindricity, max. center distance 600 mm. Center height  ...

G+H precision finishing machine FI 600 for machining multiple diameters in one setup., Feed table driven by digital servo axis, ball screw with 5 mm pitch, axis speed 0.01 mm/min – 15 m/min, positioning via internal encoder, resolution 0.001 mm, mechanical cylindricity adjustment +10° - 4°, V-flat slide guide, guideways are Turcite-B coated., Z-table movable for positioning a sword finisher, The Nagel finishing head is provided by the customer. Workhead with digital servo spindle, positionable with an initiator for detecting the reference mark, adjustable from 0-1000 rpm; 2.7 kW power, MK5 taper bore, max. grinding diameter 260 mm. Tailstock with hydraulically operated quill, fine adjustment of cylindricity, max. center distance 600 mm, center height 140 mm., Full-room machine enclosure, approximately 2.3 m high, open on the sides, with integrated loader. Front sliding door electrica ...

width of the strips: 100 mmband length: 2000 mmband speed: 15/30 m/sectube diameter: 20 - 76 mmangle adjustable from - to: 30 - 90 Gradconnected load frequency: 400 Vtotal power requirement: 2,5 /3,3 kWweight of the machine ca.: 0,32 tdimensions of the machine ca.: 1,2 x 0,75 x 1,4 mExhibition machine, unused.Belt sander with- 40 grit sanding belt- 8 sanding rollersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 19 mm

Please ask for more details!

This Chevalier FSG 1640 AD III was manufactured in 2015. It features a grinding length of 1000 mm, height of 370 mm, and a magnetic plate size of 1000 x 400 mm. The grinding wheel measures 355 x 30 x 127 mm with a speed of 1750 rpm. Weighing approximately 3500 kg, its dimensions are 4000 x 1730 x 1930 mm. Contact us for more information about this machine.

grinding diameter: 320 mmgrinding length: 1500 mmcentre height: 180 mmworkpiece weight max.: 150 kggrinding wheel size: 400 x 50 x 203 mmgrinding wheel speeds: 1670 U/mingrinding head - swivable: +/- 30 °adjustment grinding slide: 246 mmworkpiece spindle stepless: 25-220 U/mingrinding wheel adjustment: manuell 0,01 / 0,0025 taper in spindle headstock: MK 4 taper in spindle tailstock: MK 4 Number of working hours: ca. 20 htotal power requirement: 5,5 kWweight of the machine ca.: 4,3 tdimensions of the machine ca.: 4,3 x 2 x 2 mElectric 400 Volt: Internal cylindr.grinding device: Steady: 3 x Grinding wheel balancing scale: Cooling equipment: Hydraulic universal cylindrical grinding machine with a machining length of 1500 mm and a grinding diameter of 320 mm, with internal grinding attachment. Rotatable workpiece spindle head and swiveling table, hydraulic longitudinal table movement ...

grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 175 mmControl: Fanuc 21i-TB supply voltage: 3x400 Vcontrol voltage: 24 V: 24 Vtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mSehr gepflegte MaschineDie Maschine erhält noch eine komplette WartungZusätzlich neue Geometrie nach HerstellernormAusrüstung für den Schleifkopf1x Schleifscheibenausrüstung rechtsfür Schleifscheiben 300 x 40 x 127 mm1x Schleifscheibenausrüstung links für Schleifscheiben 450 x 63 x 203.2 mm1x Schleifscheibenflansch für Dia. 127 mm1x Schleifscheibenflansch für Dia. 203.2 mm1x Halbautomatische Auswuchteinrichtung KEL-BALANCEAusrüstung für den InnenschleifkopfInnenschleifeinrichtung für riemengetriebene Innenschleifspindel1x Werkstückspindelstock Standard1x Sinuslineal für die direkte Winkeleinstellung mittels Endmassen1x Kühlmittelzuführung durc ...